In this overall category you will find a wealth of products and subcategories. Danbit offers for everything from RFID readers Card readers. We stand ready to help you with choices and possible. setup. Looking for something specific, which may be tailored to your job, contact Danbit tel. 56 66 20 20.
In our knowledgebase, you can read more about blah. barcode formats.
1D, 2D, QR-code Fixed Scanner
Exlosion protection for Zone 1, Zone 2, Zone 21 and Zone 22
Reading speed up to 6 m/s at 30 readings/s
RS232 or Ethernet TCP/IP (100Mbs)
IP66 Approved
Reading distance 60 - 160 mm
Nominal distance: 120 mm
Minimum read field: 28 mm x 45 mm
Read field at nominal distance: 44 mm x 70 mm
Maximum read field: 60 mm x 95 mm
Power: 24V DC
IC/RFID/MAGNET motor card reader
USB interface
3 in one card reader
Automatic card operation from 2 sides
For example, parking lots, payment terminals, kiosks, etc.
4 PIN PSU interface
13.56MHz RFID with Ethernet, Bluetooth, USB type C
Mifare, Desfire UID
Reading distance: 1 - 5cm
USB virtual Com port
Ethernet: TCP Server/client, UDP server/client
Json mode
BT 5.0 BLE/ SPP up to 20 meters
ISO14443A/B, ISO15693
Temp: -10 - + 60°C
Dim: 73 x 71 x 27 mm
Supply: USB type C (5VDC)
UHF RFID 865 - 868MHz waterproof RFID TAG
Extremely robust
With steel wire closure
Cannot be removed from the workpiece when wire is inserted
Range from 0 - 10 meters, depending on the reader
Goal; 8.8 x 2.8 mm - 28 cm wire
Temperature: -40 - + 100°C
R/W
User memory: 512 bits
EPC memory: 128 bits
TIME memory: 96 bits
ABS + steel wire
1D, 2D, QR code handheld scanner
3mil, fast decoding,
Wireless: 2,4G (100m), BT 4.2 (30m)
Storage for approx. 20.000 bar codes
Leading light: white
CCD camera: 1280x800
Scan mode: Manual, Continous, Auto-sense
Working hour (full chrg.) >16 hours
Support all standard bar codes
USB interface to host
Temp: -20 - +55°C
Stationary barcode, QR code reader with USB
Suitable for reading mobile phone screen
4mil/0.1mm
Reading distance: 15 - 340mm (depending on code)
Scan mode: Manual via PC, Continuous, auto-detect
Dimensions: 69 x 69 x 31 mm
Temp: -20 - +50°C
Interface: USB
ADDITIONAL OPTION: Alternative version with USB-COM or RS232
Read 1D and 2D barcodes
Battery capacity: 2200mAh, 16 hours of operation time
Reading distance: 30mm to 600mm
Functions: Manual, Auto Sense and Continuous Scan
USB, wireless 2.4G and Bluetooth communication
Scan speed: 65CM/s, charging time 6.5 hours
Supports many barcode symbologies including QR codes
Dimensions: 60x115x170mm
Weight: 160g
1D, 2D, QR code bar code scanner
Handheld with 1.8 meter USB cable
Supports the most common codes.
Scanner mode: Manual, continuous, auto-sense
Light source: red light
Scanner: 640 x 480 CCD camera
Print contrast level: >15%
Temp: -20 - +55°C
Drop height: max. 1.5 meters
Interface: USB
Communication via USB
Weight: 290g
Scanning mode: Manual, Continuous, Auto-detection
Dimensions: L184 x W74 x H93mm
Reading distance: Up to 100cm
RFID tag: ISO 18000-6C
Operating frequency: 865 – 868 MHz
Mode: Single Read / Multiple-tag Read
Bluetooth® 2.1 + EDR (Class2)
Interface: BT HID, BT SPP, USB HID, USB VCP, Memory
Rechargeable lithium battery
Working Temperature: -10 to 55˚C
Wireless Multi-Connected Dongle (Optional)
Reading distance: Read > 500cm, Write > 20cm
RFID tag: ISO-18000-6B, ISO-18000-6C
Operating frequency: 865-868MHZ, 902-928MHZ
Bluetooth 4.0, USB 2.0
RF output: 18~26 dBm(adjustable)
Rechargeable lithium battery
Standby time 150 Hours
Working Temperature -20C°C to +50°C
Windows, Android, iOS, Mac OS
Mifare Desktop 13.56MHz RFID reader
NFC 1-4, ISO 14443A, ISO 15693
Other formats on request
HID, Keyboard emulation
Can be programmed for Virtual COM
HEX or Decimal, ordered upon purchase
13.56MHz
5VDC/100mA
-20 - +60°C
Dimensions: 100 x 65 x 25
1D barcode
2D QR code scanner
Stationary for clamping
Supplied with 2 pcs. 3mm threaded socket
1.5 meter USB cable
Push button to scan
Red line and light
Automatic trigger mode
Constant scanning
Universal electric car charging stand for all EV vehicles
Allow two electric cars to charge at the same time
Smart design
Dynamic management of charging
Interface protocol: OCPP 1.6
Payment for parking and charging by payment card
Monthly fees apply
AC Input 230-400 VAC +/- 10 (2 or 3 phase)
Total Power output 2 x 22kW / 2 x 32A Max (load sharing)
Payment: Payment card, Google Pay, Apple Pay (option: MobilePay)
Communication: 4G
IP degree: IP55
Operating temperature: -25 C° to 55 C°
Dimensions: 520 x 360 x 260 mm
Charger cable not included. The user uses the cable that comes with their car.
Wireless 2D QR 1D barcode scanner
For all common Symbologies
Base with USB
Bluetooth up to 30 meters
2.4GHz up to 100m
Continuous working time up to 60 hours
Memory: 20,000 codes
Power supply: 5VDC (via USB cable)
Dimensions: 152 x 66 x 95 mm (L x W x H)
Weight: 230g
Temperature: 0℃ ~ 50℃
1D and 2D bar code reader with index finger strap
Up to 30 meters with 2.4 GHz
Bluetooth, 2.4 GHz
USB with FLASH memory
Up to 100,000 codes
Built-in Li-ion battery is charged via USB plug
Compatible with iOS, Android and up to Windows10
Right-handed or left-handed operation
1D barcodes
2D / QR codes
Quick installation (no screws needed)
Can read QR and barcode from your phone's screen!
Supports most 1D and 2D formats
USB1.1, HID-KBW, HID-POS, Custom HID
RS232 (optional)
High speed
Choice of colored light when reading code
IP66-tight
90ms read speed
Reading distance: 0 to 11 cm
Summer
OS Support: Win XP/7/8/10, Android, Linux, Mac.
Operating temperature -20 to 70 degrees
Dimensions 101.5 x 78.5 x 48 mm (hole cutout 640x480 mm)
Print contrast min. 25%
5VDC with special power connector! ("-" is center, "+" is side)
125kHz EM 4xxx reader with USB
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: EC standard 125kHz
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase
Mifare reads with USB
13.56MHz
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: ISO14443A, ISO18092 FeLiCa tags
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase
MDB Master / Slave Controller via USB
Simple API for integration
can function as VMC or payment terminal
USB-COM Port ACM Driver
Built-in relay, can be controlled via command
Power supply via USB or MDB
Does not provide power output on the MDB port
Technical demanding product - Support for setup / integration can be purchased
RFID 13.56MHz Mifare reader
Looks like a USB stick
ISO14443A standard
5VDC/100mA from USB port
USB 1.1
UID code as 40 bit HEX. HID to USB port
40 bit UID
Reads the same code once on presentation
Automatic CR and line change
Reading distance up to 2 cm
LED tri-color
Dimensions: 70mm x 20mm x 9.8mm
Weight: 18g
Reading speed: less than 100ms
MDB Cable with RS232 Converter
for integrating Pay Terminal into a PC system
Demo software included
Power supply: 24VDC / VAC @ 0.5A (not included)
Dimensions: 100 x 50 x 30 mm
Mifare Classic 1K RFID Tag
Reading distance: 0 - 5 cm
ISO14443A
1 Kilobyte Memory
768 byte Free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Cannot be changed
blue key ring
Frequency: 13.56MHz
Material: ABS, IP68
DIM: 40 x 32 x 4 mm
RFID EM-Marin and QR code reader
125kHz EM4100/4200
Reading as facing right
Built-in buzzer for sound notification
Can read multiple formats
With CPU watchdog
Power supply: 12V DC
Wiegand 26/34 bits
Dimensions: 125 x 83 x 30 mm
Reads/Writes tracks 1, 2 and 3
Standards IBM, ISO, ANSI, DIN
HID emulation or Virtual COM
Dimensions 65mm×215mm×58mm
Supports ASCII only (no special characters)
Powered by 5VDC 500mA via USB
MDB Cable with USB Converter
USB-COM Port FT232RL
for integrating PAY terminal into a PC system
Demo software included
Power supply: 24VDC / VAC @ 0.5A (not included)
Dimensions: 100 x 50 x 30 mm
Reader/Writing Tracks 1, 2 and 3
Standards IBM, ISO, ANSI, DIN
USB With Emulation of COM Port
Dimensions 65mm × 215mm × 58mm
Supports only ASCII (no special signs)
Supported with 24VDC 2.2A power supply
Ceramic UHF Take against metal
survive Temp: -40 - + 250 ° C Short-lived
can autoclaved several times
operating temp: -40 - + 85 ° C
Alien Higgs-3 chip < Br> Objective: 10 x 5 x 3 mm
Weight: 0.8g
reading distance: Up to 3 meters (1 watt reader)
suitable for location against metal - can give better reading distance
read / write : 100,000 times
Data Storage: Over 10 years
IP68
Dual band RFID card reader for USB - 10 Decimal
125 kHz: EM-Marin EM41xx, EM4200
13,56MHz: Mifare - ISO14443A
HID - Keyboard Emulation
Reading distance: 5 to 8cm
Powered by USB
USB interface
operating temp. -10 ° to + 70 ° C
dimensions: 98 x 63 x 10mm (L x B x H)
125kHz RFID TAG as bracelet
diameter: 68mm
Blue (red on order - Contact us)
Net weight: 9.3 g
EM Standard: TK4100, ICODE2 chip
material : Silicone
operating temperature -40 - + 100ºC
storage temperature -40 - + 120ºC
Personell who shall document the route with the date and time
RFID TAGs placed at check-points and has unique ID
RFID TAG is 125kHz EM400X
guard pointing toward Days and press the scan button
Each TAG reading acknowledged with short vibration
Operation with a pressure
Journal memory: approximately 14,000 items
battery - easy to replace
up to 55,000 scans at full battery
interface is USB
Operating temperature: -10 to + 55 ° C
Patrol Tour Manager software included
Dual Band RFID card reader for USB - Decimal/HEX
8-10 characters Decimal/HEX - 32/40bit
125 kHz, 13.56 MHz, NFC
125kHz: EM4001, EM4002, EM4200
Mifare: ISO 1443A/B/15693
HID - keyboard emulation
Reading distance: up to 10 cm
Supplied via USB
USB interface
ID format setting with DIP switches - see diagram
Hard copy form with the product
operating temp. -25° to +70°C
Dimensions: 88 x 56 x 18 mm
Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443A/B/15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
Dip-SW to ID format setting - see Table
Environment: IP67 Waterproof, outdoor mounting
operating temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm
Keyboard emulation: 8 digits, 32bit Decimal
Frequency: 125kHz EM4xxx
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable from bottum - epoxy filled
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67
Keyboard emulation: 10 digits, 40bit Hexadecimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable on the far side
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67
Keyboard emulation: 8 digits, 32bit ASCII, Decimal
Frequency: 13.56MHz Mifare Ultra Light
Versions: Mifare S50, S70, ISO15693, ISO14443A/B
Power supply: 5VDC from USB port
Operating temperature: -10 - +75°C
Reading distance: 5 ~ 15 cm
Cable: Mount the USB cable on the back
Dimension: 118 (L) x 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof IP67, wall mounting
Keyboard emulation: 8 digits, 32-bit ASCII, Decimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating Temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model
Keyboard emulation: 10 digits, 40bit ASCII, Decimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating Temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model
Keyboard emulation: 10 digits, 40bit ASCII Decimal
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model
Top-class scanner for item and product registration
Professional Multi Reader and Writer for RFID and Barcode 1D/2D/QR etc.
Powerful circular polarized antenna
UHF RFID read and write up to 25 meters, depending on TAG
UHF TAGs are passive - without a battery
Reads NFC and Mifare TAGs
Reads up to 900 TAGs per second
Barcode reader CCD: 1D, 2D, QR codes
Access to the APP Center with programs and tools
13MP camera with flash
5.2" Display - 1920 x 1080p with touch
Communication: dual band Wifi, Bluetooth, 4G LTE
Dual SIM or Single SIM and Micro CD card
GPS/AGPS, GLONASS
Battery: 8000mAh Li-ion (approx. 12 hours of operating time)
IP65 tight. 1.5 meter drop tested
Operating temperature: -20 - +50°C
Module with 8 relay outputs
5VDC from optoisolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
Max load: AC 250V/10A, DC 30V/10A - no inductive load!
approx. size 138x56mm
5V relay print
GND, VCC, IN
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A
approx. size 106x56mm
Module with 4 relay outputs2
5VDC from optoisolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
Max load: AC 250V/10A, DC 30V/10A - no inductive load!
75x55mm
Module with 2 relay outputs
5VDC from optically isolated digital input
GND (-), VCC (+), IN (digital input)
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A - non-inductive load!
holes for mounting
approx. size 51x39x19mm (lx W x H)
REMEMBER THE RIGHT CABLE FOR YOUR NAYAX TERMINAL!
Support for setting up PAY terminals.
You will be guided through Nayax portal and get help to set it up your first terminal.
Limited to two hours
ST STM32 32-bit CPU with 512K Program flash RAM
2M Byte SRAM (1MB lookup table), 4M Bytes Flash RAM (For Font)
1 MB or 35,000 records Seite 128 x 128 dots graphic FSTN LCD display with blue backlight
Dual Color (Red / Green) LED Indicator
RS232 and USB virtual RS232 Seite 120 ~ 80 scans per second
Rechargeable Lithium Battery Pack (1700 mAh / 3.7V)
3.0V, 18mAh, MaxeII ML, Rechargeable Lithium battery for SRAM
Operating hours: Up to 24 hours and 28,000 scans
Certifications: FCC / CE / WEEE / RoHS
Weight: 175g
dimensions: 145 x 64 x 31
Operating Temperature: 0 ° C ~ 45 ° C
OS Support: Windows-based (98 / Me / 2000 / XP / Vista / Win 7 / Win 10)
Supporter NXP Desfire EV1 / EV2 Read / Write
Supporter Desfire Tags
Supporter Auto Read Desfire UID / Block
Reading distance: Up to 5 cm
built-in two-color LED and Buzzer
API Development Shooting Included
Support Decimal, HexideCimal and ASCII ID Formats
Supply Voltage: USB from PC
Unique Serial Number Identification (UID)
Operating temperature: -20 to + 65 ° C
Dimensions: 62.3 x 87.7 x 18.4 mm
Combatible with EPC Class 1 Gen 2
TAG Type: ISO-18000-6C
Support up to 860MHz (Europe) UHF
Reading distance: Up to 20 cm
Writing distance: Up to 15cm < Br> Built-in antenna
Supply voltage: USB from PC
API Software Developers Included
Built-in LED Buzzer
Operating temperature: -20 to + 65 ° C
Dimensions: 105 x 72 x 16 mm
BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!
Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)
Waterproof RFID reader
only with Wiegand Interface
Connect to access controls with Wiegand
TAG Type: EM / Mifare
Reading distance: 5.8 cm
IP68
Frequency: 125kHz / 13,56MHz
LED and Buzzer
Cable out from the back
Detachable Backpiece
Supply Voltage: 12VDC
Dimensions: 86 x 86 x 22mm
RFID Copy Reader / Writes to T5577 RW Tag
interface: USB
Work voltage: 5 VDC
Work current: 200mA
Standby Stream: 50mA
Normal current: 100mA
125kHz, 13,56MHz Mifare / NFC
Compatible with CCID and PC / SC
IC / ID Dual Frequency Replication
Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
Support UID, Fuid, Cuid, UFUID
IC Semi-Encrypted Card, IC Full Encryption Card
Dim: 108 (L) x 68 (W) x 12 mm (H)
Frequency: 860-960MHz
PVC / PET
ISO18000-6C (EPC GEN2)
Dimensions: 86x54x0.8mm
Operating temperature: -25C - 85 degrees
866 - 868MHz CE, equipped with 12dBI linear antenna
EPC Class 1 gene 2 (ISO18000-6C)
from 0 ~ 20 meters reading distance (depending on the surroundings)
from 0 ~ 7 meters of writing distance ( Depending on the surroundings)
Linux OS, Indy R2000 RFID chip, fast and precise reading rate
Ethernet connection
445 × 445 × 100 mm (l × W × H)
Operating temperature: -20 ~ + 60 ° C
IP65
Option: RS232 / 485, USB, GPIO, Wiegand 26/34, 4G LTE and WiFi
Option: Poe
Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC
RFID with QR code reader
125kHz EM400x
13,56MHz Mifare Ultralight
Built-in buzzer for audio notification
can read multiple formats
With CPU watchdog
Power supply: 12V DC
Output: RS232, RS485, Wiegand 26/34 bits
Module with 1 relay output
5VDC from opto-isolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
approx. size 43 x 17 x 19 mm
Max load: AC 250V/10A, DC 30V/10A - no inductive load!
MDB Male and Female
DEX Male and Female
MDB Male and Female
EXT-MCR
TEMP
GND
DOOR OPEN
DEX Male and Female
RS232
1D, 2D barcode reader
Wireless 2.4GHz via base station (supplied) or USB-A to USB-B cable (included)
Reading distance: 10mm-700mm
Operating time: Approx. 12 hours
Recharge time: Approx. 6.5 hours via USB or base station
Memory: 512K (over 5000 scans)
Dimensions: Scanner: 175 (L) x 72 (B) x 100 (H), Base: 200 (L) x 90 (B) x 51 (H) mm
Weight: 210g (Scanner), 230g (Base)
1D, 2D barcode reader
Wireless 2.4GHz (RF dongle) or USB-A for USB-B cable
Reading distance: 10-500mm
Operating time: Approx. 16 hours
Recharge time: Approx. 6.5 hours via USB-B
Memory: 512K (over 5000 barcodes)
Dimensions: 150mm (L) x 70mm (W) x 95mm (H)
USB 2 x PC splitter
2 x DB9 special cable output (DB9 to USB)
1 x RS232
USB Power (5VDC)
Speeds from 1200bps to 115200bps with select
OS support: Windows OS, MAC OS X, Linux
Incl. 2 pcs. DB9 male to USB-A male cable 1,2m
Operating temp. 0 - + 50 ° C
NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!
Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)
Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required
1D 2D QR barcode scanner
USB, wireless 2.4GHz, Bluetooth
Bluetooth up to 30 meters
2.4GHz RF up to 150m
Continuous working time up to 36 hours
Memory: 15,000 barcodes
Power supply: 5VDC (via USB cable)
Dimensions: 169 x 68 x 99 mm (L x W x H)
Temperature: 0℃ ~ 50℃
RFID UHF 865MHz PVC Bracelet
One-off closure
Adjustable size
Waterproof
Operating temperature: -30 ~ 75 ° C
White
Width 2.7 mm
Length Shared 100 mm
total length 278 mm
Honeywell 1902GER-2 Barcode Scanner
KUN stregkodelæser, uden ladestation
1800 mAh Li-ion minimum batteri
Op til 50,000 scanninger pr. Opladning
Trådløs
Network RFID reader
10 / 100Mbit Ethernet interface
Supports MDI / MDIX
1 x RJ45 and 1 x DC connector
TCP Server, UDP, DHCP
for 13.56MHz Mifare card
Supply: 5V DC PSU Max 300mA
IC / RFID / MAGNET motor reader
USB interface
three in one card reader
example. kiosks and the like
Automatic in / out
RFID reader for RS232 / RS485 / Wiegand
IP64
Range up to 60cm
Serial communication to / from PC
Relay output (24VDC / 2A) Serial Enabled from PC
Baud Rate : 9600, 8, n, 1
Dim: 210 x 210 x 28 mm
Extended temperature -10 - 60°C
supply: DC 12V, 350mA
10/100M Ethernet interface
TCP Server, UDP, DHCP
Til 125Khz ID Kort
Forsyning: 5V DC PSU max 300MA
Kvitteringsprinter
Termisk
Stikdæksel
Hovedapparat
Dæksel med aktiveringsknap
Rullepapir
Styreplade til 58 mm bredt papir
PS-180 & AC-kabel
Tilsluttes RS232 (serieporten)
125kHz RFID TAG with screw hole
50 mm diameter x 2.5 mm
Suitable for guard rounding as a checkpoint
ASK 64 bits,
Manchester encoding; 10 digits in HEX
With RFID, the code reads Decimal: 12 digits
