PoE - Power over Ethernet
PoE supply voltage for clients via network cables as separate power supplies for example. surveillance cameras and serielportservere is unnecessary. PoE equipment is designed to receive the supply voltage via network cables. Often PoE also be supplied from an independent power supply. Cable lengths can restrict the use of PoE. A new standard called PoE Plus (IEEE 802.3at) can deliver more power than the current PoE standard (IEEE 802.3af). Further information about PoE is available at https://www.danbit.dk/da/content/41-hvad-er-poe-
General info about midspan and endspan
PoE standard IEEE 802.3af allows the use of two types of power supply units: endspan and midspan. < p> A endspan unit (PoE switch) typically supplies power via the data leading wires of the network cables (pins 3 and 6, 1 and 2) and is available for 10 / 100Mbit and 10/100 / Ethernet 1000Mbit sources. A endspan unit is a combined midspan injector and switch. It is installed in place of an ordinary switch, if the connected network devices to be powered over the network
A midspan injector (hub) installed between a non PoE switch and the power consuming device. It is restricted to supply power through the unused pin pair (4, 5, 7 and 8) in a 10 / 100Mbit network.
10/100/1000Mbit network extender / PoE splitter
1 x PoE input (PD) PoE++ 95W
4 x PoE outputs (PSE) PoE+ 32W
Up to 32W per PoE port, 65W total power budget (see specifications)
Extend the network cable over the maximum 100 meters for PoE solutions
Extenders are powered by PoE and pass PoE on to the next extender
Dimensions: 168 x 93 x 32 mm, Weight: 403g
For harsh industrial and outdoor environments.
Voltage over Ethernet - PoE - no external voltage source
Extend a PoE voltage and data signal up to 100m
PoE output power: up to 22Watt
Over a single CAT 6 cable (STP cables are recommended).
Cascade: Maximum 4 ETH-BOOST-POE-1G-U units in extension
Extends the distance up to 500m
IP66
95W input
2 x 33W output
2 x RJ45 Gigabit ethernet (10/100/1000)
10K Jumb frames
1M Packet Buffer
8K MAC address table
Surge protection
Metal cabinet & nbsp; with IP67 density
9% - 95% humidity
-40°C ~ 75°C working temperature
With wall mount
Strømforsyning af Access Point eller webkamera via Ethernetkablet.
Stock clearance Sale
poe data and voltage splitter.
PoE in
switch to 5VDC or 12VDC
Max. Effect 15Watt
Speed: 10 / 100mbit RJ45
TILBEHØR: KØLER/ FAN TIL ETH-POE24x POE INJECTOR
24 ports PoE strømforsyning med 15,4 Watt per port
LAN uden PoE ind, giver LAN med PoE ud
Til 10/100Mbit netværk
PoE power supply via Ethernet cable, up to 30 watts
LAN without PoE input, provides LAN with PoE
For 10/100/1000Mbit network.
Power supply from 100 - 240VAC / 0.6A
PoE adapter
DC injector / splitter cable
Supports 5/12/24 / 48V
Range: Up to 40m
Dimensions DC plug: 5.5 / 2.1mm
Length cable : 15cm
Set of 2 pcs. cables - injector and splitter
PoE ULTRA Power Supply via Ethernet Cable, 60 Watt
Output Voltage: 50 - 57VDC 1.2Amp
Supporter Mid-span and End-span
Using the 4 x Pair for PoE voltage
IEEE 802.3at / of PoE standard compliant
Compatible with all IEEE 802.3at/af PoE devices
56VDC 50pwatt PoE power
Splits 56V DC power over RJ-45 to 12VDC or 19VDC or 24VDC
External power supply up to 100 meters
Passive PoE Injector with 12 / 19 / 24 VDC 0.7A output
From Active to Passive PoE converter
PoE input port: IEEE 802.3af/at RJ-45 STP / PD. Supplied from an active PoE switch
Passive PoE output port: non-802.3af/at RJ-45 STP / PSE. For equipment that is NOT for active PoE.
LAN without PoE voltage gives LAN with PoE
4 port PoE power supply 30 Watt per port
Connects between non-PoE switch and e.g. IP cameras with PoE
For 10/100/1000Mbit networks
Power supply included
Can be powered with 52-56VDC / 122Watt
Pin 4/5 +, 7/8 - (Mid-span)
Dimensions: 97 x 70 x 26 mm
Temp: -10 - +70°C
Switches without PoE can with this Injector "upgraded" to PoE switch
24 ports PoE full power supply
Per port DC 52V 30.8/15.4 watts
LAN without PoE in, LAN with PoE out
10 / 100 / 1000Mbit network
Max PoE 440 Watts
Splitter for PoE via Ethernet cable
LAN with PoE in, gives LAN without PoE out
12 VDC 2A or 24 VDC 1A next to other equipment
10/100 / 1000Mbit PoE Network Extender
Extend the network cable with PoE over the magic 100 meters
4 pieces. Extenders provide a maximum distance of 500 meters
Extenders are powered from PoE and pass PoE on to the next Extender
Dimensions: 94 x 70 x 26 mm
PoE In: Max 30.8 Watts
PoE Out: Max 26 Watts
Weight: 189g
