RFID / Barcode / Magnet stribe / TAGs / POS

125kHz RFID TAG for adhesion
Dim: 20 x 3 mm
3M tape
black
TAG is waterproof

Brugervenlig bonprinter

For passive UHF tags 865MHz
Supports ISO18000-6B, ISO18000-6C
RF power: 0.1 - 1 Watt
TAG reading is controlled via software commands
Interface: RS232, RS485 and Wiegand 26/32
Circular polarized antenna
RS-232, RS-485, Wiegand 26Bits/32Bits
5V DC power supply / 2 Watt
Dimensions: 220 x 220 x 50 mm
Weight: 1.5 kg
IP65

125kHz RFID TAG
For key ring
Dimensions: 37 x 30 x 8 mm
with printed UID code
TAG is waterproof

Connects to the USB port - but emulates a serial port, suitable for older software and newer PCs

Passive 865 MHz RFID PVC tag (860 - 960MHz)
0 - 10m depending on antenna gain
ISO short format 86 x 54 x 2 mm - card holder available
Protocol: ISO 18000-6C (R / W)
Card ID in other sector.
Operating temperature: -25 ℃ ~ + 65 ℃

Passiv 865 MHz RFID holder til RFID865TAG-W

UHF RFID Take with Strip
Frequency: 860-960MHz
Blue
Width 30 mm
Length Sign 110 mm
Height / Thickness 12.5 mm
Length Strips 215 mm
Total Length 325 mm

Passive 865 MHz RFID PVC Tag
0 - 10 m depending on antenna Gain
ISO Short format 86 x 54 x 0.5mm
protocol: ISO 18000-6C (R / W) - 96bit EPC / 512bit User
Tag ID UID in the second sector.
Read and write: 100,000 times
Material: Paper
Operating temperature: -20 - + 85 ° C

Passive 865 MHz RFID PVC TAG
0 - 2m depending on antenna gain
TAG format - self-adhesive paper
Protocol: ISO 18000-6C (R/W) - 96bit EPC/512bit user
TAG-ID UID in second sector.
Dimensions: 121 mm X 44 mm X 0.4 mm
Weight: 2 g
Operating temperature: -10 °C to 60 °C

Passive 865 MHz RFID PVC Tag
0 - 2 meters Depending on Antenna Gain
TAG Format 55 x 10 x 1.6 mm - for textile - Flexible
protocol: ISO 18000-6C (r / W) - 96bit EPC / 512bit User
TAG ID UID in the second TAG sector.
Weight: 1 g
Operating temperature: -20 - +50°C,

RFID TAG mounting on metal
Passive 865 MHz RFID PVC Tag (860 - 960MHz)
0 - 5 meters depending on antenna Gain
TAG Format 138 x 30 x 5 mm
protocol: ISO 18000-6C (R / W) - 96bit EPC / 512bit User
TAG ID (UID) in the second sector on the roof.

Active RFID Tag with key ring and vibration sensor
2.45 GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless tag programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified

Outdoor UHF RFID reads and writes
for Passive UHF 865MHz TAGs
TAG protocol: EPC Class 1 Gen 2
ISO 18000-6C
Reading/writing is controlled via software commands
Software App Platform: API (C ++, C #) Development Kit
Up to 10 m Reading distance, depending on UHF Tag
built-in 8DBI antenna, circular polarity
IP67 Plastic cabinet
Operating temp: -40 - + 75 ℃
150 ~ 240VAC / 50Hz adapter with 12VDC / 3A out
Dim: 259 × 259 x 100mm (L × B × H)

Active RFID Take with key ring pendant
2.45GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless TAG programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified

Active 2.45GHz RFID TAG
2.45GHz read/write
Range up to 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
Wireless programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
Built-in SOS button

Active RFID Tag with hole for pendant + vibration sensor
2.45 GHz read and write
Transmission distance 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
wireless programming
Digital RSSI/LQI Data
low battery warning
Supplied without 1 x 2032 battery
Built-in button
FCC, CE Certified

Dual band RFID TAG card
2.45GHz and 13.56MHz Mifare read/write
Programmable parameter
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
Combine active and passive RFID
Long operating time on battery
Wireless TAG programming
Supplied without battery (2 x 2032)

Active RFID Tag as bracelet with light sensor, anti-tamper
2.45 GHz read and write
Dimensions: 44W x 30H x 11D (mm)
weight: 23.4g
wireless programming
Digital RSSI/LQI Data
low battery warning
Supplied without 1 x 2032 battery
Built-in button
FCC, CE Certified

Active 2.45GHz RFID TAG card
2.45GHz read and write
Transmission distance 140m
programmable parameter
Supplied without 2 x 3V CR2032 battery
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
wireless TAG programming

Active RFID Tag as bracelet with 2 x temperature sensor
with light sensor
2.45 GHz Read and write
Dimensions: 44W x 30h x 11d (mm)
Weight: 23.4g
Wireless programming Digital RSSI / LQI data
low battery warning
built-in button
FCC, CE certified

Long Range 2.45GHz RFID reads and writes for 140 m Range
Programmable parameter
1 x RJ45 (10/100 Mbit)
1 x RS232 (RX, TX)
1 x RS485 2-wire Protocol: ICMP, ARP, IP, TCP (Server / Client), UDP, DHCP, HTTP
Supply voltage: 7 - 15 VDC / 4 Watt
Dimensions: 107W x 138h x 30D (mm)
Weight: 222g
easy installation

125kHz TAG
rectangular, transparent plastic
Dim: 20 x 25 x 0.7 mm
TAG is waterproof

125 kHz RFID TAG
Dim: Ø25 x 3 mm
TAG is waterproof

125kHz RFID TAG
Designed as screw
plastic
9.5 mm Thread
12 mm head
19 mm long.
TAG is waterproof

125kHz RFID TAG
credit card size 0.8 mm
sequential ID
TAG is waterproof

Tag, key ring
target: 35 x 2 x 4 mm
with engraved UID code
tag is waterproof

Take, credit card size 0.8mm.
Tags are waterproof

TAG, cylinder, black
4.5 x 30 mm
TAG is waterproof

TAG, round piece, self-adhesive
1.7 x 25 mm
TAG is waterproof

Keyboard emulation: 8 decimal places (HID)
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - +75°C 
Humidity during operation: waterproof
Reading range: 5 ~ 15 cm
Cable length: 164 cm
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
wall mounting, water resistant

RS485 Command Controllet Ready / Read
Set to Read. Called to Transfer Take UID Code
10 digit Hex - (26 digits for PC)
2-wire RS485 Half-duplex.
125 kHz EM format.
12vdc 0.2a (MDFollows not)
Dimensions: 113.5 x 45.6 mm (L X B)

125khz RFID reader for outdoor mounting on wall
sealed with hardened epoxy - cable mid rear
EM4000 125khz RFID Reader for wall mounting
reading distance 0 - 5cm, depending on roof size
40 bit code, 10 digits ASCII (Decimal)
RS232, only TX. GND
9600, 0 Start, 8 Data, 1 Stop, Non Parity, FLOW: HW
Wiegand 26bit format
LED Indicator and Buzzer Control Manager
Supply voltage: 12VDC / 200ma
Cable length 1 meter (8 Core)
Goal: 114 x 46 x 13 mm

Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Dim: 85.7 x 54 x 0.8 mm

Mifare Classic1K TAG
designed as key ring
Bag with 20 pieces.
reading distance: 0 - 5 cm
ISO14443A
1 kilobyte Memory
768 byte free in 16 sectors / 4 Blocks / 16 byte
UID code is factory programmed - cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
Dim: 40 x 32 x 4 mm

Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte Free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Can't change
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Numbered - printet on the card
target: 85.7 x 54 x 0.8 mm

Frequency: 13.56 MHz
Can easily be programmed for other formats
programmable HID or COM port
Can program sectors in TAG
RF Protocol: ISO14443A, MIFARE
Built-in antenna
supply: USB 5V / 200mA
Operating temp. -20 to + 70 ° C
Play
Plug Dimensions: 105 x 72 x 16 mm |

Multi 13.56 MHz Mifare Reader
RS232 Connection
5VDC (Power Jack 5.5 / 5.1mm) Not included
Cabinet: ABS, indoor IP65
Dim: 88 x 56 x 18 mm

RFID Dual band EM40XX / Mifare reader

13.56MHz, Mifare, Felica, Desfire, Ultralight, Felica

125kHz

Reading distance up to 3 cm

RS232 or Wiegand 26 interface

For wall mounting

LED and Buzzer

Supply voltage: 5 - 18VDC

Cable out from the back

Dimensions: 78 x 43 x 15 mm

Interface: USB
Reading distance: 0-6 cm
TAG Type: EM4100 and FDX-B
Built-in Antenna
Built-in Buzzer
Supply: USB 5V / 200mA
Drift temp. -20 to +70 ° C
Plug Play
Dimensions: 105 x 72 x 16 mm

Reading distance: Up to 5 cm
Frequency: 13.56 MHz
Read Mifare Ultralight and Mifare F1 Standard Tag
Mifare 1024/4096 byte, Ultralight 512bit, ISO 14443A
3 in 1 interface : Wiegand, MSR ABA TK2 and RS232
LED and Buzzer
Quick Data Transfer
Weatherproof, ABS
Cable Length: 90 cm
Cable is not terminated with DB9
Easy to install
Supply: 5 - 18VDC (Liniary PSU)
Dim: 83 x 47 x 16 mm

RFID Reads 125khz Em-Marin
Em 4100
64 Bit Manchester Coding
10 digit ASCII
RS232 - Only TX and GND
Wiegand Interface
Reading distance: 0 - 20cm Depending Of tag
Supply voltage: 5 - 12VDC
Use liniar power supply (not switch mode)
interface cable from the back
IP67
Goal: 78 x 43 x 15 mm

Kassebonprinter med auto klipper

Kassebonprinter med auto klipper

Trigger til at åbne pengeskuffer med Epson, Citizen eller Star interface

Trigger to open cash drawers with Epson, Citizen or Star interface

Med indbygget touch skærm og bon printer

Kan læse kort hvor magnetstriben vendes mod eller væk fra brugeren

reads ISO tracks 1, 2 and 3

RS232 interface

Kan læse kort hvor magnetstriben vendes mod eller væk fra brugeren