El-magnets / Electronic locks / Alarms / Access Systems

Electronic door magnet with team power up to 272kg
Gen-Close timer Adjustable from 1 - 80 sec.
Door Closed Sensor - Relay output
Aluminum with epoxy at coil
12VDC or 24VDC, 6Watt
Switching between 12 and 24VDC
No holding power at Voltageless
Magnet: 250 x 42 x 26 mm
Door plate: 185 x 38 x 12 mm
Mounting plate: 250 x 25 x 5 mm
Anti magnetic function
Operating temperature: -10 - +55ºC

Door Phone 720p camera
Up to 99 apartments
Resident access via PIN code or RFID tag
Supports calls to mobile phone via SIP
Outdoor unit is IP65 close
Modules for additional apartments available separately (contact our sales department)
Power supply Outdoor unit: 12VDC or PoE, Family unit: 12VDC
App for Android and IOS allows residents to let guests in from the phone

Infrared light barrier
Up to 7 meters between the IR emitter and reflector
transmitter is powered. Passive round reflective piece
Power supply: 12-24 V DC / AC (not included)
Relay: max 36V 1A
Terminal: DC input Relay output: COM, NO (normally open contact)
Temperature: -20 ~ +60°C
Dimensions: 40 x 35 x 100 mm (W x D x H)

Bluetooth BLE 4.2 (low energy)
Up to 200 users
With user rights
Up to 1000 event logs in memory
Access with RFID chip (EM, 125kHz)
With LED indicator
APP for iPhone and Android
APP is Easiprox
Range adjustable from 0 to 20 meters
Can be set to open by pressing in the APP or automatically when you are within range
With solid state relay - no wear and tear
Adjustable re-lock time 1 - 1800 seconds
3 lock mode: Re-lock, always open, always locked.
Vandal alarm
Supply voltage: 12VDC
Dimensions: 120 x 76 x 21 mm

Bluetooth BLE 4.2 (Low Energy)
Up to 200 user
With user rights
Up to 1000 event logs in memory
access with RFID tag (EM, 125kHz)
access by PIN code (4-8 digits)
with keypad backlighting
app for the iPhone and Android
Range up to 50 meters
Can be set to open at pressures in the APP or automatically once inside the selected range
With solid state relay - no wear
With vandal alarm
Supply voltage: 12 to 24VDC
Dimensions: 152 x 45 x 23 mm

IR safety sensor for automatic doors prevent property damage and personal injury
Mounted above the frame or on the door
Relay output connected dørautomatikstyringen
Length: 360 mm | IR beam adjustment: 5-25 °
6 measuring points
detector distance: 0 to 2.5 meters
Max. installation height: 2.6 meters
Relay Output is continuously active when the thing or person is detected
Dimensions: 360 x 45 x 45 mm
Weight: 350g
Supply voltage: 12 - 24VDC or 12 - 24VAC
IP54
EU standard: EN16005

Door machine with switch-box for swing-door
Supplied switch box for function selection
With connection for access control
With connection for NON-TOUCH access switches
Connection for emergency battery
Approved according to EN 61000 standards for safety
Supply voltage: 100 - 240VAC
Built-in motor: 60VDC, 2Amp
Power consumption: approx. 77 Watt
Connection for 24VDC backup battery
Dimensions: 125 x 79 x 34 mm
Door opening angle 80 - 120 °
Door width: 750 - 1200 mm
Door height: 2800 mm
Door weight: 50 - 150 kg

230VAC

The switch is for touch-free access.
Up to 10 cm activation distance (10 - 100mm)
Touchless EXIT switch with relay output
Relay timer: 0.5 second
IR motion technology
Adjustable activation distance
With blue and green LED
Relay contacts for 12 - 28VDC, 3Amp
Stainless steel front plate
Supply voltage: 12VDC
Dimensions: 86 x 86 mm

Access is controlled by Smartphones via BT
Equipped with call button to request access
United pushbutton with light
Built in sounder
Up to 1000 users
Different user rights
3 functions: access with BT APP, access via query Exit
one administrator
BT: BLE4.2 (Low Energy)
BT range: up to 50 meters, depending on conditions
Compatibility: Android 5.0 and up, iOS9.0 and up
relay contact: NO / COM / NC (switching relay)
Supply voltage: 12 to 24VDC 1A
Operating temperature: -20 - + 70 ° C
Dimensions: 86 x 86 x 38 mm | material: plastic housing

All Weather Exit contact
cast aluminum housing with sturdy green button
contact DPDT (NO / NC / COM)
Monentary contact 250VAC / 3A and 125VAC / 6A
Can withstand heavy weather and extreme environments.
Ideal for doors and gates
Dimensions: W 90 x H 85 x D 58 mm

Accessories for Door-Magnet-V12
Mounting the Hold Magnet on side of Karm
mounting door plate If this is necessary
for outward door (outswing)
Heavy Aluminum profile
Dim: L 220 x D 70 x B 45 mm

accessories DOOR-MAGNET-DUAL12
Mounting brackets for inward double-doors (inswing)
set contains 5 parts
Strong aluminum profiles
Measurements: The magnetic angle: 534 x 76 x 48 mm. Die-plate angles: 190 x 64 x 64 mm

Electronic door magnet for double-doors, folding door etc.
Holding force up to 544 kg for each door
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Automatic change-over between 12 and 24 VDC
No holding force when not energized
Operating temperature: -10 - 55 ° C
Humidity: 0-95% non-condensing
Double magnet: 534 x 68 x 40 mm
Door plates: 185 x 61 x 16 mm | Double-mounting plate: 534 x 40 x 8 mm | weight: ca. 6.5 kg

Electronic door magnet for double-doors, folding door etc.
Holding force up to 364 kg for each door
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Automatic change-over between 12 and 24 VDC
No holding force when not energized
Operating temperature: -10 - 55 ° C
Humidity: 0-95% non-condensing
Double magnet: 530 x 49 x 29 mm
Door plates: 185 x 45 x 14 mm
Double-mounting plate: 530 x 29 x 5.5 mm
Weight: ca. 5.6 kg

Designed for face mount on in-swing doors or gates
Operating Temperature: -10 - 55ºC
Armature Plate: 185, 45, 14 mm.
Magnet: 203, 43, 40 mm.
Spike and surge protection.
Holding force up to 272 Kg.
Dual voltage 12 or 24 VDC.
Anti-residual magnetism.
High reliability.
Weight: 3.0 Kg.

door magnet with clamping force up to 272kg
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, 0.5A / 0,25A
Automatic switching between 12 and 24VDC
No holding power at any voltage
Operating temperature: -10 to + 55°C
Magnetic: 250 x 44 x 26 mm
Door-plate: 185 x 38 x 12 mm
Mounting plate for the frame: 250 x 26 x 5.5 mm
Anti magnetic function

door magnet with clamping force up to 545kg
Rusrfri steel cabinet full sealed with epoxy and is vandal proof
Equipped with thread for flexible tube to protect the cable
Supply voltage for team: 12VDC or 24VDC, 6Watt
Cable change-over between 12 and 24 VDC
Only holding force when energized
With Bond Sensor (Lock indicator)
Operating temperature: -10 to + 55°C
Magnetic: 220 x 62 x 41 mm
Door-plate: 185 x 61 x 16 mm
Anti-magnetic feature
Weight: ca. 5 kg

The door magnet with holding force up to 136 kg
stainless steel housing full sealed with epoxy
Voltage for holding: 12VDC 6 Watt
No holding force at voltageless
Operating temperature: -10 to +55°C
Magnet: 170 x 32 x 24 mm
Amaturple plate: 152 x 32 x 10 mm
Anti magnetic function
Weight: Approx. 2.5 kg

21.5 "Infostander 1080x1920
Touch Screen
Spritdispenser 4 liters
Low Level Sprit
Adjustable amount of Sprit
Android Based
Wall bracket or foot can be purchased (not included)

Can be used with the Danbit program "Hi Customer"
and for monitoring the number of visitors in store

Call for prices!

Electronic Mini Lock
12VDC / 1A
Goal: 80 x 65 x 14 mm
Weight: 260g

Hold voltage - 12VDC
Holding Force: 150kg
Dimensions: 64.1 x 40 x 25 mm | Weight: 0.18kg

Waterproof and sunscreens
black | Material: ABS plastic
Dimensions: 15cm x 10.4cm x 9cm
Simple to install and good quality

BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!

Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)

Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC

Compact Access Control for Mifare RFID
40mm in diameter, 30.2mm long
Thread is 28 mm
Can hold up to 1000 Mifare TAGs/cards
Relay output COM, NO, NC (changeover switch)
Adjustable hold timer - (potmeter) 0.5 - 100 sec.
Users are created with "master card"
Users are removed with "master card"
No software, no PC or terminal
3 different LED colors
Makes sound when programming
IP54 sealed front
Supply voltage: 12VDC / 70mA
No physical interface

Accessories DOOR-MAGNET-LOCK
bracket for mounting to the inward door (inswing)
Set consists of three parts
Strong aluminum profiles.
Good adjustability

Electronic door magnet 12 / 24V DC
363 KG holding force
Operating temperature: -10-55 degrees
Fungtighed: 0-96% non-condensing Blue Magnetic: (L) 265 (W) 29, (D) 49mm
A valve plate (L) 185 (W) 45, (D) 14mm
mounting plate (L) 265 (W) 29, (D) 6.5mm
Weight: 2.79 KG

door magnet with clamping force up to 140kg
Stainless steel and vandal proof
supply voltage of teams: 12 or 24VDC, 6Watt
Automatic switching between 12 and 24VDC
Active with applied voltage
no holding power by energized
Operating temperature: -10 - 55°C
Magnetic: 200 x 36 x 23 mm
Door-plate: 152 x 32 x 10 mm
Mounting plate for the frame included
weight: 1.2kg

Tilbehøt to DOOR-MAGNET-MINI
bracket for mounting the door magnet on the side of the frame
Strong Aluminum

Rev: LO

Designed for narrow frames, gates, out-swing, in-swing and glass doors.
Weather resistant: IP65, designed for harsh outdoor environment.
Vandal-resistant stainless steel casing.
Low maintenance, High reliability.
No holding force at zero voltage.
Holding force: 600 lbs (272 Kg).
Suitable for harsh environment.
Anti-Residual Magnetism (ARM).
Armature Plate: 185, 38, 12 mm.
Magnet: 218, 44, 27.5 mm.
Dual voltage 12 or 24 VDC.
Weight: 1.5 Kg.

Outdoor finger scanner with RFID and PoE
Up to 500,000 users (1 finger)
Up to 10 fingers per. user
up to 3,000,000 log
CPU: 1.0 GHz Single Core
Memory: 8GB flash + 256MB RAM
2.8 "color TFT LCD
16-bit audio
Operating temperature: - 20 ° C ~ 50 ° C
Weight: 440g
Dimensions: 142 x 145 x 45
Built-in tamper alarm
Built-in Wifi (IEEE 802.11 b / g)
Ethernet: 10/100 / 1000 Mbps, auto MDI / MDI-X
RS485, Wiegand, TTL input, USB 2.0
1 x Relay
Power supply: PoE

MDB Male and Female
DEX Male and Female

MDB Male and Female
EXT-MCR
TEMP
GND
DOOR OPEN
DEX Male and Female
RS232

2 x digital inputs NC / NO type
2 x analog inputs. 12 Bit resolution, 0-5V, 4-20mA or 0 - 20mA
2 x Relay outputs 5A / 30VDC, 5A / 250VAC
1 x USB port
GSM 3G 4G
9-36VDC (12V / 300mA)
Backup Battery 3.7V 1200mAh
Operating temperature -10- + 70 ° C
Custom SMS Alarm Messages
APP for iOS and Android

Miniature Electronic holding magnet for cabinets and closets
Supply Voltage 12 VDC, 140mA minimum
Holding force up to 36 KG
Operating temperature: -10 ~ 55C
IP65 close Stainless steel with epoxy filler
magnet dimensions: 70 x 38 x 26 mm
Counter-plate dimensions: 80 x 32 x 18.5 mm
Weight of 350 g

Compact motor-controlled lock with separate pawl
Control voltage - 12VDC
With door-closed status
Holding force: 50 kg
Operating temp. -10 ° C - + 55 ° C
Dimensions: 41 x 35 x 19mm
Pal: ø9mm, 18mm
Weight: 0.11kg
Can be used on wood, aluminum and metal

Electronic lock
DC 12V up, 0.8A
Metal
Cable length 36cm
Weight: 155g

Face creation with RFID and fingerprint reader
Advanced fake finger detection
Touch Keypad and Voice Over IP Doorphone
Max Users: 250,000 (Finger) / 10,000 (face)
Up to 10 million logs And up to 20,000 photos
Resolution: 500 dpi
RFID: 125kHz Em, 13.56MHz Mifare, HID prox
supplied via POE or 12VDC
Dimensions: 149.5 x 207.8 x 45.5 mm
Operating temperature: -20 - + 60 ℃
Technical demanding product - Support hours can be purchased

NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!

Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)

Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required

Electric endplate 70mm
Error-proof - not suitable for back pressure
Quick and easy installation
Static holding force & nbsp; 454 kg
12VDC
Dimensions: 70 x 43 x 25mm

8 x digital inputs NC / NO Type
6 x analog inputs. 12 Bit resolution, 0-5V, 4-20mA or 0 - 20mA
4 x Relay outputs 5A / 30VDC, 5A / 250VAC
1 x USB port
GSM 3G 4G
9-36VDC (12V / 300mA)
Backup Battery 3.7v 1200mAh
Operating temperature -10- + 70 °C
Adapted SMS Alarm Messages
APP for iOS and Android

Tilbehør til ALARM-GSM-BASE
Tilbehør til ALARM-GSM-PIR-UD
Kan blive trådløst tilsluttet til en alarmbase
Til tilslutning af kablede alarmsensorer
Til udendørs brug + stænktæt
Forsyningsspæning: 13.8V 200mA

Tilbehør til tyverialarm ALARM-GSM-BASE
Forbindes trådløst til alarmsystem
Trådløs sirene med nem stik kontakt montering

Tilbehør til ALARM-GSM-BASE
Tilbehør til ALARM-GSM-REPEATER
Dobbelt sensor med infrarød og bevægelse
Undgår falske alarmer
opdagelses distance 8 til 12 meter

Tilbehør til tyverialarm ALARM-GSM-BASE
Indstrålingsbeskyttet
Detektionsafstand 6-8 meter
360 graders vinkel måling
installationshøjde 3-5 meters
Forsynes med 3.6V lithium batteri

Modtager/ styreenhed til trådløst PIR system
Håndterer 1-3 sensorer/ detektorer
Forsynes via 12V dc 35mA
Driftstemperatur -20 til +55°
IP65 tæt til udendørs brug
Frekvens 433 MHz - rækkevidde 150m
Til vægmontering
Virker ikke uden PIR sensor PIR-WL35

Wireless infrared outdoor PIR motion sensor
External antenna
Adjustable range sensor 10-35m / 750 sqm
Battery operated 2 x AAA 1.5 volt
Operating temperature -20 to + 55 °
IP55 close to 150 meters line-of-sight
For wall mounting (fittings included)
The system does not work without reciever PIR-WL-R

Compact motorized lock with separate pawl
Locked without tension
Releases the locking pawl in case of short-term tension
The pal part has a push-out (5-8mm)
Adjustable delay on relocking 2 to 5 seconds
2 lock inputs
Can be mounted in 2 different ways
Control voltage - 12 - 28VDC / VAC, max. 165mA
Dimensions: 60 x 60 x 22mm

Reading of license plates with the speed of 0-200 km / h
can register license plates for up to four lanes to 5-Megapixel resolution at 30 fps
Built-in infrared white LED (approximately 60 meters)
RJ45 gigabit port
Sound alarm
ONVIF support
Motion detection
WDR
Micro SD
PoE
12VDC / 24VAC
Extended operating temperature -40 - 60 °

Styring/ kontrolboks til pneumatisk pullert
Kabinet inkl. kompressor, PLC styring og ventiler
Kan håndtere op til 5 x pullerter
Mål: 770 x 820 x 560mm
Forsyning: 220V AC

Pneumatisk pullert uden styring til vejspærring/ tyverisikring.
Til udendørs brug
Rustfrit stål
90 cm høj, diameter: 16,8cm
103 Kg
LED indikering
Tyverisikret

OBS: kræver styring

Bluetooth
Up to 196 users
APP for Android - e-access E1196
Range up to 50 meters
Can be set to open by pressing in the APP
Can be set to open automatically when you are within range
Built-in buzzer 85dBA can be activated when the door is open.
When you choose to activate Bi-stable function, you can press down the E button on the screen for a few seconds to activate and keep the door unlocked indefinitely.
Does not save events (no log function)

Thermal sensor for mounting incl. 10 m wire

Electrical bolt lock for door frame with lid guide
24V, 550mA
Hold force: 1000 kg
Holdebolt has a diameter 16mm and goes 16mm out
Input / output button
Delay Time 0 Sec , 3 Sec, 6 Sec, 9 Sec.
Screws and fittings included

Door status Red / green LED light indicator. 12 / 24VDC /1.2Watt.

Radiostyret PC-sikkerhedslås til USB-porten

Beskytter PC’en mod at andre kan bruge den.
Radiomodtager til USB-porten og lille sender til lommen.

Exit / push button function for access control systems

Plastic front bezel for cost-effective styling

Robust construction for panel or wall mounting

Door exit release for electronic locks

Access control panels in buildings, offices, or security installations

Emergency egress systems

Retrofit replacement for damaged or missing exit buttons

Timestamp TNA software module for ACCESS RFID KEY and ACCESS RFID WIFI

Door switch for access controls - EXIT button.
make contact by pressing
Contact: NO / COM
Max. 36VDC 3Amp
cast aluminum, steel button
Operating temperature -20 - + 50 ° C
Dimensions: 83 x 32 x 25 mm | Weight: 135g

Beautiful stainless steel door phone with 6 buttons / users
Sale - special price

Tilbehør: Strømforsyning til IRISID-7111-U1

Electric magnetic lock plates for gates and doors
Holding force is 250kg
Supply voltage 12VDC, minimum 6Watt
Consists of electronic magnetic and strong metal plate to the door / frame
Dimensions: 251 x 25 x 47mm
plate: 185 x 12 x 38mm
Closed indicator (contact)

Special door fittings for DOOR-MAGNET + E + S
L-Bracket: 50x33x251mm (WxDxL)
Z-Bracket: 50x100x190 mm (BxDxL)

 stand-alone adgangskontroller Mifare

Temperature sensor for mounting
10 m wire
Dallas DS18B20 Chip
With copper bracket for vertical mounting (M6, 6mm diameter mounting hole)
Measuring range: -10 to + 85 ° C Accuracy on +/- 1 ° C

Thermal sensor for mounting
Dallas DS18B20 Chip
5 Meters

Output contact for access
Stainless brushed steel button steel
Acquisition metal housing for wall
Contact NO / NC / COM
Dimensions: 91 x 28 x 20mm
Contact: max 2A

Accessories DOOR-MAGNET+E 
bracket for mounting the inward door
Strong aluminum profile
Set consists of 3 parts

Electronic door magnet with a holding force of up to 272kg
Options: Open-alarm, shut down timer 2-70 sec.
Option: alarm relay output
Aluminum with epoxy by the coil
12VDC or 24VDC is selected with jumper. 0,5A / 0,25A
Magnetic: 250 x 42 x 26 mm
Door plate: 185 x 38 x 12 mm
Mounting plate: 250 x 25 x 5 mm
Anti-magnetic feature
Operating temperature: -10 ~ 55C

Bevægelsessensor med mikrobølge. Til brug i forbindelse med automatiske døre

Monteringsdåse i plastik 115 x 43 x 32 mm

Accessories DOOR-MAGNET-MI
bracket for mounting on the side of the frame
Strong aluminum profile
Dim: 170 x 37 x 30 mm

door magnet with clamping force up to 545kg
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, 0.5A / 0,25A
No holding power at any voltage
Operating temperature: -10 to + 55°C
Magnetic: 267 x 68 x 40 mm
Door-plate: 185 x 61 x 16 mm
Mounting plate for the frame: 267 x 40 x 8 mm
Anti-magnetic feature
Weight : 4,9kg

Trådløs røgdetektor til WA-BASE+