Air quality tester that can show if there is gas in the air.
Can be used as a MODBUS RTU sensor, the host can be accessed via RS-485.
$373.32
Item number AIR-GAS
Monitoring of premises, storage rooms, server rooms, installations, machines, refrigerators, freezers, food shuttles and the like, the DANBIT Datalogger modules are a good choice. Measurement and logging of temperature, humidity, atmospheric pressure, carbon dioxide, voltage or current are all with date and time stamp.
Measurement data can be displayed on a computer as graphs and values and can be exported as a csv file for statistical processing and report printing.
DANBIT A / S is a sole distributor of T & D Datalogger of very high quality, from Japan's largest manufacturer of compact units for measuring and recording temperature, moisture, voltage and pulses.
The data logger is battery powered, very robust, waterproof and for installation without cable routing. The data logger can be included in a permanent monitoring system or temporarily placed in a location where monitoring is desired. T & D offers data logger products, where measurement data and graphs can also be displayed on Smartphones.
Air quality tester that can show if there is gas in the air.
Can be used as a MODBUS RTU sensor, the host can be accessed via RS-485.
PT100 sensor for precise temperature measurements
Class A platinum resistance thermometer
Monitors air, liquid and solid surfaces
Temperature range: -50°C to 180°C (-58°F to 356°F)
IP68 protection class for durability
1 meter cable length
Line of sight range 3 km (MAX)
Data transmission interval 1, 2, 5 or 10 min
Battery life about from 1 to 8 years
Compatible with AIR-BASE station and cloud
Stable and accurate sensor
Optimal for both industrial and commercial applications
Fast and reliable response time
Ideal for real-time temperature monitoring
1-axis vibration measurement
Frequency range: 10 Hz to 1K Hz
Amplitude range: ±8g
Data Format:
Acceleration(mg): RMS, Maximum, P-P
Velocity(mm/s): RMS
Top 10 spectrum values(Amplitude/Frequency)
Crest Factor
Supported Modbus RTU Slave protocol
Size: 51 x 30 x 19mm
Supply voltage: 10 - 30VDC
Temp: -25 - +75°C
CO2 - CO - temperature - humidity
measurement of carbon monoxide and carbon dioxide
alarm device at high concentration
color LCD display with touch
CO 9-1000 ppm
CO2 0-9999 ppm
Electrochemical sensors (NDIR CO2 sensor)
temperature of -10 - + 50 ° C, humidity 0 to 100% RH
Up to 450,000 logs with date and timestamps
APP: iOS APP and Android APP, powerful software
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 2-wire / Ethernet RJ45
Relay output for local alarm or building management
Power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 114 x 106 x 56 mm
DIN or wall mounting bracket
The indoor light-gauge, temperature and humidity sensor 3 in 1
For energy optimization and building automation systems
Measuring range of illumination: 0 to 20,000 lux
Temperature Range: -20 to + 60 ° C
humidity Measuring range: 0 to 100% RH
Supports DCON and Modbus RTU / TCP protocols
Supports MQTT protocol Ethernet interface
With RS485 / RJ45 Ethernet communications interface
Relay output - 6 Amp @ 250VAC
Power supply: PoE and 10 - 48VDC, ca. 2 Watt
Operating temperature: 0 - + 75 ° C
web configuration and firmware update via Ethernet
Ceiling Mounting
The motion sensor light detection, temperature sensor for energy management
Connects energy management, local-lighting control via RS485 port
With powerful built-in relay for simple light activation 250VAC (1500 Watt T8 )
360 ° motion detection - up to 8 m in diameter and 4 meters height
Time delay / Sensitivity is adjustable
temperature sensor, - measuring the room temperature or fire alarm
Relay output to turn on the light via the PIR / light-strength and temperature sensors
RS485 2-wire communication bus
DCON and Modbus RTU protocols
ceiling surface mounted design
Supply voltage: 10 - 30VDC ca. 2W
Dimensions: Ø121 x 52 mm | IP20
1 channel detection of fluid leakage with MODBUS
Shutter local alarm of detection of water leakage
Acoustic alarm - adjustable
RS485 2-wire MODBUS RTU
2 x LED indicators for power and alarm
Relay output for alarm for water leakage - 30VDC / 2A
Monitor cable for liquid detector
Sensor cable can be up to 500 meters
Sensitivity is adjustable
Supports DCON and Modbus RTU protocols
Embedded Dual Watchdog
Operating temperature: -25 to + 75 ° C
Small form factor with DIN bracket
Dimensions: 83 x 70 x 29 mm
Operating voltage: 10 - 30VDC
RS485 / RS422 / RS232 Master Gateway to Meter-Bus Slaves (sensors, actuators, etc.)
Supports up to 100 Meter-Bus meters (slaves)
MODBUS RTU function codes: 0x03 and 0x04 readdata
Selection of serial port, only one can be selected to be active
Baud rate x 2 (M-bus and COM port can be selected at different speeds)
Baud rate M-bUS: 300-2400 bps
Baud rate COM port: 300-115200 bps
Transparent data - no protocol conversion
M-BUS connection, 2-wire, max. 350meter.
Greater distance up to 5km requires a number M-bus repeaters
Supply voltage: 10 - 30VDC, 1.8 - 12Watt
Dimensions: 122 x 72 x 33 mm
Removable terminal blocks
Operating temperature: -25 - + 60°C
DIN mount
Robust plastic case
Humidity meter
Humidity / temperature data logger
Long-term monitoring of rooms
With alarm function and interface
Numeric and graphic display
Pt100 sensor with 2 m cable
Steel tip of 100 mm ø3.2
Cable is rated for -80 - +200°C
Web based controller with 8 digital inputs
Digital High is: +4 - +26VDC
8 x digital inputs Opto-isolated
Common ground
200Hz Counter - 24bit
Tasks: 50 Schedule Planned, 50 Conditional, 20 Tuffer Terms
Email Alarms by defined conditions
Supports encrypted e-mail servers such as Gmail
RTC with NTP server synchronization
No software required
Graph (Logged data)
HTTPS / TLS encrypted
Static or DHCP IP Address configuration
Modbus, SNMP, Remote Service, IP Filtering
On-site update
Supply voltage: 9 - 28VDC
Dim: 98 x 78 x 36 mm
WEB-based data logger for temperature and humidity sensors
Can be programmed to 3 second sampling time
-55 - + 125°C, -40 - + 80°C 0 - 100%rH
4 pcs. 1-Wire bus for 16 sensors, each
Max. 64 pcs. temperature or temperature/humidity sensors
Max. distance to sensors: 180 meters
Tasks: 50 scheduled, 50 Conditional, 20 override
Email alerts, custom (encrypted email servers, such as gmail)
Real-time clock with NTP server synchronization
No software required
Configurable logging
Graph (logged data)
HTTPS/TLS encrypted
Static or DHCP IP address configuration
Modbus, SNMP, Remote Service, IP filtering
On-site is updated
For DIN rail / wall
Supply voltage: PoE or 9 - 28VDC, 134mA
Dimensions: 98 x 78 x 36 mm
WEB-based data logger for temperature and humidity sensors
Can be programmed to 3 second sample time
-55 - + 125°C, -40 - + 80°C 0 - 100%rH
4 pcs. 1-Wire bus for 16 sensors, each
Max. 64 pcs. temperature or temperature/humidity sensors
Max. distance to sensors: 180 meters
Tasks: 50 scheduled, 50 Conditional, 20 override
Email alerts, custom (encrypted email servers, such as gmail)
Real-time clock with NTP server synchronization
No software required
Configurable logging
Graph (logged data)
HTTPS/TLS encrypted
Static or DHCP IP address configuration
Modbus, SNMP, Remote Service, IP filtering
On-site is updated
For DIN rail / wall
Supply voltage: 9 - 28VDC, 134mA
Dimensions: 98 x 78 x 36 mm
RS485 / RS422 / RS232 converter for Meter-Bus meters, actuators, etc.
Supports up to 100 Meter-Bus meters (slaves)
Selecting the serial port, only one can be selected to be active
2 x Baud rate (M-bus and COM port can be selected at different speeds)
Baud rate: 300 to 115,200 bps
Transparant data - no protocol conversion
M-bus connection is 2-wire , max. 350meter.
larger distance up to 5km requires a number of M-bus repeaters
Supply voltage: 10 - 30VDC, 1.8 - 12Watt
Dimensions: 122 x 72 x 33 mm | Removable terminal blocks
Operating temperature: -25 - + 75 ° C
DIN bracket
Robust plastic housing
Multi I / O module for measurement and with USB port
16 Analog inputs, +/- 10V, +/- 5V, +/- 2V, +/- 1V
16 bit resolution
frequency Up to 250kHz Total Samplings-Rate
2 Analog Exit +/- 10 Volt
4 Digital Entrance TTL / CMOS
4 Digital Outputs TTL / CMOS
1 Counter Input, 16 Bit
Voltage Variety from USB The port
Buy DAQ Software: NEXTVIEW
Dim: 167 x 113 x 30 mm
LCD Display
Active kWh (positive and negative), quadrant reactive
Undervoltage, undercurrent, overcurrent, underload
RS485 MODBUS RTU
4G for data (SIM card not included)
Cloud price is not included
Operating temperature -20℃~55℃
IEC 62053-22:2003,IEC 62053-21:200
CO2 - CO - temperature - humidity
Industrial / outdoor robust environment-measuring station
LCD color display
CO2 0-9999 ppm - electrochemical sensor
temperature of -20 - + 50 ° C, humidity 0 to 100% RH
dewpoint measurement based on the temperature and moisture
Up to 450,000 logs with date and time stamps
Web-based configuration interface
APP: iOS APP and Android APP, powerful software
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 / Ethernet / PoE
Relay output for local alarm or building management
power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 211 x 130 x 70 mm
DIN or wall mounting bracket
Pt100 transmitter from sensor to 4-20mA
Working voltage: 24VDC
Accuracy: +/- o.2% full scale
Temperature range: -50 - +200°C
Dimensions: Ø45 mm
Plastic
Weight: 25g
Clamping: Center hole
Zero point adjustment
Adjustment of amplitude
Advanced Controller with logging
With slot for internal I/O expansion module, A/D, D/A, D/I, D/O, relay
Program with simple logic functions - WISE (Web Inside Smart Engine)
Logic functions with IF-THEN-ELSE logic
Supports SNMP, SMTP, FTP, MQTT, Modbus / TCP / RTU and DCON
Ethernet 10/100 / 1000Mbit
Setup via the built-in Web server
1 x RS232 port
2 x RS485 port
Supply voltage: 12 - 48VDC
1-wire Combi Sensor
Temperature: -20 - +60 ° C +/- 0.6 ° C
Resolution: 0.1 ° C
Humidity (Moisture): 5 -95% Rh +/- 5%
Resolution 0.1%Rh
IP54 Plastic housing, very sturdy
Up to 8 sensors on the same 1-wire
16 bits at temperature
12 bits at moisture
Supply Voltage: 4.5 / 25mW
Dimensions: 74 x 66 x 36 mm
Multi-band 4G LTE Cat.1 controller, logger and alarm
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital “dry contacts”. High on contact
4 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 loggings
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm for 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Response from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - optional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C
Measurement data via mobile network
for Nano SIM card
protocols: HTTP, HTTPS, FTP, SNTP, SMS
collector measurement data from wireless T&D loggers
can serve up to 20 T&D loggers
Free T&D WebStorage Service - Cloud Based
Notifications with SMS by measurement limit
Setup with Bluetooth or USB
Battery operation Supplement. Powered from 9 - 38VDC
Gradual data collection from units of measurement Up to 150meter
SS relay output and digital input
target: 96 x 66 x 39 mm
Weight: 135g
Verify that e.g. goods transport has had the desired temperature
Suitable for quality documentation
Super robust design - for harsh environments
Place the data logger next to the item and let it document the transport
EN12830 approved for food
Memory for 16,000 measurements with date and time
Measuring interval: from 1 second to 1 hour
Log data is transmitted optically to the Data Collector
Find Data Collector under Accessories
No physical connection - thus IP67
Free presentation software, tools and Cloud
LCD display and LED alarm when the limit is exceeded
Measuring range: -40 - +80°C +/-0.5°C accuracy
Battery operating time: 2 - 4 years
Dimensions and weight: 62 x 47 x 19 mm, 45 grams
Battery: 1 x LS14250
Base unit with display and optical communication
Jig for programming T&D data loggers
Jig for collecting stored log data from T&D data loggers
USB connection to PC
Free software for PC
Battery operation - Operating time approx. 100 days
OPTIONAL: AC adapter is acquired 6VDC, 3.5 / 1.5 mm plug
Dim: 125 x 58 x 26 mm
Weight: 90 g
Wireless Temperature and moisture præsicions logger with memory
Sending measurement data to Data Collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
Data Logger is not on-line
2 x 8,000 measurements in memory with the date and timestamp
Accuracy of measurement: max. + / - 0.3 ° C range depending
Removable external sensor. Close O-ring
Free Cloud service: TD WebStorage for Data Collector
LCD display shows current measurements
PC software: tools and presentation included
Data Logger setup with Data Collector Optical
Dimensions: 62 x 47 x 19 mm
Fixed antenna: 24 mm
Battery type: LS14250 x 1
Wireless Temperature Logger with memory
Bluetooth APP - T&D Thermo
Sending measurement data to Data Collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
Data Logger is not on-line
16,000 readings in memory with date and time stamp
Accuracy: +/- 0.5°C
Free Cloud service: TD WebStorage for Data collector
LCD display shows current measurements
PC software : tools and presentation included
Data Logger setup with Data collector Optical
Dimensions: 62 x 47 x 19 mm
Fixed antenna: 24 mm
Battery type: LS14250 x 1
Data collector for wireless data loggers
Repeater - Radio relay station provides greater range
Radio distance to Dataloggers is approx. 150 meters
Radio frequency is 870MHz
Battery operation as repeater (Radio relay station) for 6 months.
Automatic repeater function
Wireless Data Collector from Dataloggers.
Data is transferred to PC via USB
Bluetooth
Has docking holder for setting up Datalogger functions
Operating temperature: -10 - +60°C
Dimensions: 96 x 65 x 25 mm
Weight: 70g
Only for T&D Dataloggers
Wireless Temperature Logger with memory
Bluetooth APP: T&D Thermo
Sending measurement data to Data Collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
Data Logger is not on-line
16,000 measurements in memory with the date and time stamp
Accuracy of measurement: max. + / - 0.5 ° C range depending
Removable external sensor. Close O-ring
Free Cloud service: TD WebStorage for Data Collector
LCD display shows current measurements
PC software: tools and presentation included
Data Logger setup with Data Collector Optical
Dimensions: 62 x 47 x 19 mm
Battery type: LS14250 x 1
Wireless Temperature and Humidity Logger with memory
Bluetooth to T&D Thermo APP
Sending measurement data to Data Collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
2 x 8,000 measurements in memory with the date and time stamp
Accuracy of measurement: max. + / - 0.3 ° C, +/- 5% RH
Removable external sensor. IP64 with O-ring
Free Cloud service: TD WebStorage for Data Collector
LCD display shows current measurements
PC software: tools and presentation included
Data Logger setup with Data Collector Optical
Dimensions: 62 x 47 x 19 mm
Battery type: LS14250 x 1
Wireless Temperature Logger with memory
Med Bluetooth. T&D THermo APP
Sending measurement data to Data Collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
16,000 measurements in memory with the date and time stamp
Accuracy of measurement: 0.05mA + 3% at a measuring range from 10 to 40 ° C
Removable external terminal block. Close O-ring
Free Cloud service: TD WebStorage for Data Collector
LCD display shows current measurements
PC software: tools and presentation included
Data Logger setup with Data Collector Optical
Dimensions: 62 x 47 x 19 mm
Battery type: LS14250 x 1
Wireless Temperature Logger with memory
Bluetooth T&D APP
For Pt100 and Pt1000 3-wire
Temperature: -199 - + 600°C, +/-0.3°C + 0.3%
Sends measurement data to Data Collector (Base Station) on 870MHz
Distance between Datalogger and Data Collector up to 150 meters
Battery operation up to 10 months with one upload per day
Data loggers are not on-line
16,000 measurements in memory with date and time stamp
Removable external terminal block. Close with O-ring
Free Cloud service: TD WebStorage for Data Collector
LCD display shows current measurements
PC software: tools and presentation included
Data logger setup with Data Collector Optical
Dimensions: 62 x 47 x 19 mm
Fixed antenna: 24 mm
Battery type: LS14250 x 1
1 channel temperature data logger - wireless with Low Energy Bluetooth 4.1
Measuring range -199°C to +600°C with pt100 / pt1000
Measuring range -199°C to +1760°C with Termo Coupler Feel
Operating Temperature: -40°C & to + 80°C
IP30 - not waterproof
(-25 to 80°C during wireless communication)
Accuracy is average. ± 0.3°C
Measuring Range: 15 Choices from 1 Sec to 60 Minutes
Option between Endless or Memory is Full
Memory: 16,000 Measurements with Date and Timestamp.
LCD Display, Displays Measurements, Warning, Battery Life, etc.
With Lithium Battery
Dimensions H: 62mm × W: 47mm × D: 19mm
Battery Life: Approx. 1 month to 1.5 years
Purchase temperature sensor
1 channel temperature data logger - wireless with Low Energy Bluetooth 4.1
Measuring range -60°C to + 155°C - only temperature sensor
Operating temperature: -40°C to + 80°C - measurement unit + sensor
(-25 to 80°C during wireless communication)
Accuracy is average. ± 0.3°C
Measuring Range: 15 Choices from 1 Sec to 60 Minutes
Option between Endless or Memory is Full
Memory: 16,000 Measurements with Date and Timestamp.
LCD Display, Displays Measurements, warning, battery life, etc.
With Lithium Battery
Dimensions H: 62mm × W: 47mm × D: 19mm
IP67 w/sensor in place.
Sensor is IP68 proof
Battery life: approx. 1 month to 1.5 years
Dataopsamler med display og USB
Kun til T&D BLÅ SERIE Dataloggere
Data collector with LCD display
USB interface for PC
optical communication for units of measurement
Short Range radio communication for units of measurement
Only for TD data loggers
Radio base station retrieves Log data from loggers
base station is a link between loggers and PC
base station data from 100 wireless loggers
Frequency Band Base Station and Data Logger is 870MHz
Up to 150meter - depending on conditions
Greater distance with repeaters (radio-relay stations)
Transfers the log data via GSM 3G GPRS mobile network
USB interface to PC for setup:
base station, connection dock for data Like (Optical )
Protocol: SMTP (POP before SMTP AUTH (login) FTP, SMS
SMTPS (SMTP over SSL)
Temperature: -10 - + 55 ° C
Dimensions: 96 x 66 x 39 mm | Power supplied
only for T&D loggers
1 channel temperature data logger - wireless with Low Energy Bluetooth 4.1
Measuring range -40 ° C to + 80 ° C
Operating Temperature: -40 ° C to + 80 ° C
(-25 to 80 ° C during wireless communication)
Accuracy Average. ± 0.5 ° C
Measuring range: 15 choices from 1 sec to 60 minutes
Choice between endless or memory is full
Memory: 16,000 measurements with date and time.
LCD display, displays measurements, Warning, Battery Life, etc.
With Lithium Battery
Dimensions H: 62mm × W: 47mm × D: 19mm
IP67 Close
Battery Life: Approx. 1 month to 1.5 years
Temperature and moisture feel to log-wl5xx
Battery for log-wlxxx series
in normal battery change Log-data not
Wireless data logger for humidity, temperature and CO2 measurement
Additional purchase Data collector for retrieving measurement data.
Data collector can be connected to T&D Cloud or PC
Operating time on battery alone is 2 days.
Additional power supply: LOG-DC5V
Wireless transfer of data to Data Collector
Wireless Pulse Logger with memory
Max. number of pulses per measurement interval: 61439 pulses
Max. Frequency: 3.5kHz (0.3ms)
Sending measurement data to Data Collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
Data Logger is not on-line
16,000 measurements in memory with the date and time stamp
Removable external terminal block. Close O-ring
Free Cloud service: TD WebStorage for Data Collector
LCD display shows current measurements
PC software: tools and presentation included
Dimensions: 62 x 47 x 19 mm
Fixed antenna: 24 mm
Battery type: LS14250 x 1
Radio base station retrieves Log data from loggers
base station is a link between loggers and PC
base station data from 100 wireless loggers
Frequency Band Base Station and Data Logger is 870MHz
Up to 150meter - depending on conditions
Greater distance with repeaters (radio-relay stations)
interface for presentation PC is Wifi
USB interface to PC for setup:
base station, connection dock for Data Like (Optical)
Protocol: SMTP (POP before SMTP-AUTH (login) FTP, SNTP, DHCP, DNS)
temperature: -10 - + 60 ° C
Dimensions: 102 x 83 x 28 mm
Power supply included
Only for T&D loggers
Wireless Temperature Logger with memory
Sending measurement data to the data collector (base station) at 870MHz
Distance between the data logger and data collector up to 150 meters
Data Logger is not on-line
8,000 measurements per type of the memory with date and time stamp
Luminance: 0 - 130.000Lux
UV intensity: 0 - 30mW / cm 2
External sensors
Free Cloud service: TD WebStorage for Data collector
LCD display shows current measurements
PC software: tools and presentation included
Data Logger setup with Data collector Optical
Dimensions: 78 x 55 x 18 mm
Fixed antenna: 60 mm
Battery type: AA x 1
Impulse and voltage logger with cable shoe cable
cannot be included in TD white series
Residual sale
2 channel temperature logger with external sensor
Temperature sensor: -40 - + 140 ° C
Freedding temperature: -40 - + 80 ° C
1 x RJ45 Ethernet
1 x Power Jack 3.5 / 1.5 mm 6VDC
Power supply for LOG-WL500GSM
100 - 230vac for 6VDC
Cable length: 1.8m
Connector: Power Jack 3.5 / 1.3mm
Temperature, humidity, UV. Lux data logger with memory
measurement data for PC via USB port
measurement data for PC via RS232 Port
8,000 measurements per Type in memory with date and time stamp
Luminance: 0 - 130,000lux
UV intensity: 0 - 30mW / cm2
External sensors
Free Cloud Service: TD Webstorage for data collector
LCD Display Displays current measurements
PC Software: Tools and presentation included
Dim: 78 x 55 x 18 mm
Battery type: AA X 1
Accessories: Plastic bracket with screw holes for data logger LOG-WLXX with large battery
RS485 Modbus RTU combi sensor
Temperature: -20 - +60°C +/-0.6°C
Resolution: 0.1°C
Humidity: 5 - 95% rH +/- 5%
Resolution 0.1%rH
IP54 plastic housing, very robust
Up to 32 sensors on the same RS485 bus
16 bits at temperature
12bit when wet
Supply voltage: 4.5 - 26VDC / 25mW
Dimensions: 74 x 66 x 36 mm
Remote-controlled 230VAC power rail with on/off per output
1U 19" for rack mounting - rack bracket included
8 x 240VAC C-13 outlets
1 x C20 input plug. C-19 plug not included
Switch on / off Server via the network / Internet
User interface is via Web browser
Wi-Fi connection
Password protected
Supports iPhone and Android
Energy meter Per outlet in KWh.
Cannot turn on / off exits !!
8 x 230vac IEC C13 Outlet with energy measurement in kWh per removal.
Web interface
Compact environmental meter with e-ink display
CO2 Concentration 0 - 9999 ppm
Temperature 0 - + 50 ° C
Relative humidity 0 - 85%
atmospheric pressure 300 - 1100 hpa < Br> Bluetooth (Via App) or Radio (Via Air-Base)
2 AA batteries up to 3.9 years (10 minute intervals)
Dimensions 70 x 70 x 24 mm
small, portable and easy Using
control air quality to reduce Covid-19 infections
1-wire lysmåler til synligt lys
0 - 83.000lux med 1 lux opløsning
Op til 23bit opløsning
Automatisk fuld skala justering
Kan kaskadekoples via RJ11 stik
Forsynes fra Controller med 5VDC/4mA
Maks. 30 meter kabel
Mål: 85 x 35 x 24 mm
IP30 plasthus med flange
Measuring module for analog in / out and digital in / out
16 x analog inputs 16 bit, (± 10V, ± 5V, ± 2V, ± 1V)
2 x analog outputs 16 bit, (± 10V )
32 x digital inputs / outputs Choose with SW
Total Sample Rate 250khz
Galvanically Isolated for LAN
Digital Inputs / Outputs are TTL / CMOS <3 x Counter 32 Bit, Max. 16 MHz
pulse, increment decoder or pulse measurement
TCP / IP Ethernet
power supply from PoE or externally with 12-40VDC
synchronized for real-time
comes with programming examples in VB, C++ Delphi ,. Net
Can be used with NextView, LabVIEW and Profilab Graphic
14 days free trial with NEXTVIEW 4
Temperature logger with USB interface and fixed interval.
Disposable meter.
Interval: 20 min.
USB Temperature logs incl. Software
Operating temperature: -35 To + 80 ° C
USB interface for set-up and data Download
2 Programmable / custom alarms
IP67
Windows from XP up to 10 (32 and 64 -Bit).
Stand-Alone Temperature data logger
memory for 16,000 measurements
Use eg. Log-50U for setup and emptying
Log interval: 1 second to 60 minutes in 15 Step
Battery life: Depending on log interval
Typical battery life: 2 - 4 years
Dim: 62 x 47 x 19 mm
Weight: 45 g
Operating temperature for data logger: -40 - +80°C
IP64
The 16-bit analog-to-digital converter
Versions: 0-20VDC, 0-10VDC, 0-5Vdc, 0-2VDC
With temperature compensation
4 Megabytes of memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC, 0-20 VDC)
Battery operation - 10 year battery
Acc: Software for configuring, downloading, graphing, analysis and alarm reporting (supplied)
onfigurable controls alarm / surge control
Measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
16-bit analogue-to-digital converter
With temperature compensation
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC to 0-20 VDC)
Battery operation - 10 year battery
Acc: Software for configuring, downloading, graphing, analysis and alarm reporting (not included)
Configurable alarm controls / overvoltage control
Measurement speed from 20 milliseconds (1 channel) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
Connect up to 12 "AIR" sensors (optional 100 "AIR" sensors)
Independent local data storage or Cloud
E-mail alert (requires network connection)
SMS alert ( requires supported USB modem)
Measurement data for up to 10 years with 100 sensors
Mesurment intervals: 1, 2, 5, 10 minutes
Power voltage: 12VDC
Operaiting tempeture: 0 °C to 40 °C
3 phase energy meter / logger with Windows software
Multi input Data logger for up to 70000 loggings
10/100 Mbit Ethernet
Password-protected, web-based configuration and control
4 digital inputs, compatible with S0 pulse interface
6 analog inputs with 0/10V and 0/20mA
MODBUS RTU interface for up to 24 sensors (registers)
Up to 24 channels for monitoring
Up to 24 independent alarms
SNMP v.2 support - SNMP Trap - alarm notifications
HTTP and SNMP port change - HTTP API commands
Periodic HTTP posting of XML/JSON status files to client-server systems
MODBUS TCP/IP support
Dynamic DNS with DynDNS, No-IP and DNS-O-Matic support
NTP protocol support
Supply voltage: 10 to 28V DC
Wired LAN temperature and moisture logger, USB
Battery operation from 10 days (1 measurement per minute Auto-upload)
Battery operation Up to 1 year (1 measurement per hour Auto-upload)
2 x 8,000 Memory measurements with date and time stamp
External temperature / moisture sensors
Temperature: 0 - + 55 ° C
Moisture: 5 - 95% RH
Accuracy: +/- 0.5 ° C
Accuracy: 1% RH
Feeling Response Time: Approx. 7 minutes
Free Cloud Service: TD Webstorage
LCD Display Displays Current measurements
PC Software: Tools and presentation included
USB port
target: 78 x 58 x 26 mm
Battery type: Aa
Wireless Temperature Logger with Wifi, Bluetooth
Battery operation from 10 days (1 measurement per minute auto-upload)
Battery operation up to 1 year (1 measurement per hour auto-upload)
Longer battery operation with Bluetooth turned off during logging
2 x 8,000 measurements in memory with Date and time stamp
2 pcs. external thermistor sensors
Accuracy: +/- 0.3 ° C at -20 - + 80 ° C, +/- 0.5 ° C up to 110 ° C
Measuring solution: 0.1 ° C
Sensor response time: approx. 75 seconds
Free Cloud service: T&D WebStorage
LCD display shows current measurements
PC software: tools and presentation included
USB port
Dimensions: 78 x 58 x 26 mm
Battery type: AA
Free T&D WebStorage Cloud Service
Wired LAN temperature logs with external sensors
battery operation from 10 days (1 measurement per minute Auto-upload)
Battery operation Up to 1 year (1 measurement per hour Auto-upload)
2 x 8,000 measurements in memory with date and timestamp
2 pcs. External thermistor sensors
Accuracy: +/- 0.3 ° C at -20 - + 80 ° C, +/- 0.5 ° C up to 110 ° C
measuring solution: 0.1 ° C
Feeling Response time: approx. 75 seconds
LCD Display Displays current measurements
PC software: Tools and presentation included
USB port
target: 78 x 58 x 26 mm
Battery type: AA
Free TD WebStorage Cloud Service
16-bit 4-20mA to-digital converter
With temperature compensation
2 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Input ranges (4-20mA, version with 0-50mA)
Battery operation - 10 year battery
Add on: Software for configuring, downloading, graphing, analysis and alarm reporting (not included)
Configurable alarm controls / overvoltage control
Measurement speed from 20 milliseconds (1 channel) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
16-bit 4-20mA to-digital converter
With temperature compensation
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Input ranges (4-20mA, version with 0-50mA)
Battery operation - 10 year battery
Tilkøbes: Software for configuring, downloading, graphing, analysis and alarm reporting (not included)
Configurable alarm controls / overvoltage control
Measurement speed from 20 milliseconds (1 channel) to 12 hours
Robust aluminum housing
Coated printed circuit board for protection against moisture, corrosion
4 channel data logger with display
External memory with SD slot
USB port for PC
input: DC to 100Hz
+/- 0.3 Volt to +/- 24 volts
2ms Log -Interval with 10 Microvolt resolution
Log intervals: 2 MS to 60 minutes
Number of log intervals: 23
Daisy-Chain 4 x Log-MCR4V
Battery operation: 4 days to 130 days, dependent on logging
External power supply: Micro-USB adapter (not incl.)
Web browser access to your data loggers
e-mail and SMS alarms at cross-border
with LAN and WiFi
4 x USB ports for data loggers
with USB Hub Supports up to 10 Data loggers
50GB flash memory for log data
Automatic log data Real-time log display
Good graphical cutting surface and data export
Power supplies connected data loggers
USB LOG Mxxx Device Server for data acquisition
Connects LOG Mxxx data loggers to Ethernet
Transferring Log data to PCs with LOG SiteView SW
Real-Time Data-view
Supports transfer via Internet and Ethernet
Up to 5 LOG Mxxx can be connected via USB HUB
Up to 5 clients can receive LOG data while
access is password protected
Powers LOG Mxxx with excitement
Dimensions: 110 x 100 x 38 mm
Supply voltage: 12VDC / 1A (PSU is included)