Moxa A53, DB9 W/ADAPTER

External COM ports via Ethernet and Internet

8 x RS232
RJ45
10/100Mbit Baset Device Server
15kv ESD
for RackMontage
100-240 VAC Power Input
OS Support: 95/98 / Me / NT / 2000/2003
Real Com / Tty Drivers, Linux Real Tty Driver
Operating temperature: 0-55 ° C

Radio link for serial transmission on the 2.4GHz band

One to one (P2P) or one to many (P2M)

Range up to 700 meters with whip antenna

Range is improved with Panel antenna

Serial port: RS232 or RS485

Supply and COM port are with screw terminals

5dBi omni-antenna: R/SMA female connector (external thread and pin)

Simple setup with rotary and DIP switches

2.4GHz, 16 channels

Supply 10 to 30 VDC

Dimensions: W 33 x H 108 x D 84 mm

Operating temperature: -25 - +75°C

Housing: Plastic

Intelligent Can For Modbus TCP / IP Converter
Supports both CAN specification 2.0A and 2.0B
Maximum transmission speed up to 1M BPS for CAN and 115.2 Kbps for RS-232 RS-485
Maximum transmission distance on CAN over 1000m (Follow the CAN specification)
7-segment LED display for module IP, RS-232 Baud rate, CAN configuration ...
Supports Web Configuration
Supports Maximum 24 Ethernet clients Connection
Modbus TCP / RTU command for reading and writing CAN message
Transparent communication between the CAN devices via Ethernet
30 Specific CAN IDs in Modbus TCP / RTU Mode
DIN mounting

PROFIBUS TO HART Convert, Gateway
4 x HART Canals
Max. 2 pcs. HART Masters
Point-to-Point or Multi-Drop HART Mode
Possibility of connecting 15 HART modules
PWR / RUN / ERR indication LED
Built-in Watchdog
4 kV ESD Protection
Operating temperature -25-75 ℃
for DIN rail mounting

External COM ports via Ethernet and Internet

Serial Device Server with RS422 or RS485 via Ethernet and Internet.
RS422 / 485 seriesport via screw terminal
Dual DC Power input with Power Jack and Terminal block
Power supplies from 12 - 48VDC
DIN mounting

Internet Communication controller with 1 x CAN bus, 1 x RS-232, 1 x RS-485 and 1 x Ethernet
10/100 Base-TX Ethernet controller
TCP / IP protocol
80 MHz CPU
1 x RS-232 port, 1 x RS-485 port and 1X CAN port can be used simultaneously
Max Transmission Speed ​​up to 1M BPS for CAN and 115.2Kbps for RS-232 RS-485
7 -Segment LED Display
Software Configuration for Can and RS-232
Web Configuration
Up to 25 Ethernet Client Connections
Supports Virtual Com

Porte: RS422
Stik: DB25 female
Tilsluttes PCI kontrollerkortet via DB37 kabel.
Boksene sammensættes via DB37 stik i siderne på boksen
for at få op til 64 porte.
MOXA C32061T v2.2

2-port RS-422/485 with Surge & Isolation, Universal PCI Card Simple Type: MULTIFUNCTIONAL I/O

Sunix 8139SI

2-port RS-422/485 high speed communication board
Windows 2000 / XP / 2003, Windows NT, Windows 95/98 / ME, WIN 7, WIN 8, WIN 10 32/64 Bit
Windows XP Embedded, WINDOWS 2003, 2008, 2012
DOS, FreeBSD 4.x, Linux 2.0.x (Alpha), Linux 2.2.x (Alpha), Linux Base

MOXA CP132I

DB9 female connector
1200 to 921600 baud
Supply 5 to 24 volts via USB or screw terminals
Built-in WiFi antenna
USB adapter cable included

Serial to HART Convert
Allows 2 pcs. Hart Masters
Point-to-Point or Multi-Drop Hart Mode
Possibility of connecting 15 HART modules
Point-to-point or multi-drop HART mode
for configuration of modules
Isolated COM 1: RS-232 / 422/485
PWR / RUN / ERR INDICATION LED
Built-in Watchdog
4 kV ESD protection

Auto Data Switch MP401B Parallel Printer Sharing Device
4 PCs can share the same parallel printer
Automatic switch to parallel printer
Active line is displayed with LED
Timeout programmable from 3 to 70 sec.
Supplied with 9VDC voltage supply
Plug: 5 pcs. DB25 female connector

MOXA CBL-RJ45M9-150 - Serial RS-232 cable - RJ-45 (male) for DB-9 (male) 1.5 m -
For Moxa CN2510, CN2610, CP-104, Opt4, Opt8; NPort 5210, 5610, 5630 asdf

RS232-RS422/485 konverter
Hastighed: 230.4 kBit/s
RTS/CTS support
Til DIN og vægmontage
Plug-in terminal block til RS422/485

16 Ports RS-232 Expansion module with RJ45 connector for the MOXA C320 Turbo Series
add-on module for
C320T/8 ISA Rackmount
C320T/16 ISA Rackmount
C320T/8 PCI Rackmount
C320T/16 PCI Rackmount

MOXA NportW2150-EU

USB 2.0 to 4 x RS232/422/485
High-Speed serial ports 921.6kbps
Driver for Windows, Linux, Mac OS X
LEDs for Power and TxD/RxD activity
ESD protection on USB and serial ports
2.5kV electrical isolation (ISO version only)
Bus powered (non-ISO), Self powered (ISO version)
Wide range of power input 9 - 54V DC
Metal housing
19-inch rack and wall mounts
Wide range of operating temperatures

4 x DB9, power supply included

Moxa CP-114IS
OS Support Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64)

• Windows 8
• Windows Server 2012
• Windows Server 2008
• Windows 10
• Windows 7