Converter / Amplifier / Insulator

With our wide range of different products, in this category we have converters, amplifiers, insulators. Here you will find interfaces like RS232 / 485/422, or convert from RS232 to RS485 / 422. If you need a specific solution for a larger project, call in and hear our sales department for more information.

Converter / Amplifier / Insulator

There are 69 products.

Showing 1-50 of 69 item(s)

Active filters

  • USB to 1 x RS485 / RS442...

    USB to 1 x RS485 / RS442 adapter with DB9 male - galvanic insulation

    Get 1 piece. x RS485 or RS422 port via adapter connected to PC's USB port
    Galvanic isolation (optical), 2KVolt
    Baudrate up to & nbsp; 921.6 Kbit / s
    Windows Win 7/8, Vista, Linux & Server 2000 to Server 2016 (WHQL certified)
    Linux Kernel 2.4
    Mac OS X 10.9, Driver Approved by Apple

    Price 1,117.00 DKK
    Product code: CNV-USB-RS485I
    Physically in stock  
  • USB to RS232 RS422 RS485...

    USB to RS232 RS422 RS485 converter

    Connect RS232/RS422/RS485 equipment to USB port
    Baudrate up to 921,6 kbit/s
    Select type of port by DIL switch
    Supports Win7/8/10, MAC

    Price 988.00 DKK
    Product code: CNV-USB-UNI
    On the way in  
  • USB to 4 x RS232 adapter -...

    USB to 4 x RS232 adapter - USB cable included

    Få 4 stk. RS232 porte på PC via USB porten

    Forbind 4 x RS232 enheder til USB port
    Metal kabinet og med vægmontering
    Baudrate op til 115,2 kbit/s
    Supporterer ikke hardware licens nøgler

    Supporting Win10

    Price 1,207.00 DKK
    Product code: CNV-USB-RS232SL-4P
    On the way in  
  • USB to 8 x...

    USB to 8 x RS232/RS422/RS485 adapter, port-type selector on the back

    Adds eight high-speed RS-232/422/485 serial ports via USB connection
    2k bytes transmitter and receiver
    Requires no IRQ, DMA, I/O port
    RS-232 max bit rates of up to 1 Mbps
    RS-422/485 maximum bit rates of up to 10 Mbps
    Automatic transmission buffer control for 2-wire RS-485 half-duplex operation
    Biasing and terminating resistors installed on board
    Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
    Supported RS-422 signals: TxD-, TxD+, RxD+, RxD-, GND
    Supported RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-, GND
    Supported RS-485 2-wire signals: Data-, Data+, GND
    Data Bits: 7/8
    Parity: None, Even, Odd, Mark, Space
    Stop Bit: 1, 2
    Flow Control: Hardware (RTS, CTS), XON/XOFF
    Monitor LEDs for TxD, RxD indicating port status
    Built-in AC to DC switching power supply, 100VAC to 240VAC
    Virtual COM port drivers available for Windows 11, 10, 8.1, 8, 7, Vista, 2003, XP, 2000
    Win Server: 2000 up to 2018, Linux, MAC
    Industrial quality metal case with DIN bracket for DIN rail mounting

    Price 4,211.00 DKK
    Product code: CNV-USB8UNI-R
    On the way in  
  • USB to 1 x RS485/422...

    USB to 1 x RS485/422 adapter with DB9 male

    Get 1 pc. RS485 or RS422 port via the adapter connected to the PC's USB port

    Choose between 1 x RS485 or RS422,
    Baud rate up to 921.6 Kbit/s
    Supported by Win up to Win10

    Price 674.00 DKK
    Product code: CNV-USB-RS485
    On the way in  
  • Insulated RS232 for RS485...

    Insulated RS232 for RS485 converter for DIN rail mounting

    RS232 for RS485 converter
    Opto-insulated
    Galvanic isolation between DC input and RS232 port
    Supply voltage: 9 - 50VDC, 10 - 34VAC
    Automatic flow control
    Up to 1.2km Built-in Termination Resistance - Can be Disconnected
    Screw Terminals

    Price 1,433.00 DKK
    Product code: CNV232-485I
    On the way in  
  • 4 x RS485 Repeater and...

    4 x RS485 Repeater and splitter to 4 directions. RS485 master on input. RS485 slave on 4 outputs. Half duplex for DIN rail

    Repeater and splits an RS485 signal into 4 branches
    RS485 master on input polls RS485 slaves with ID
    Only asked RS485 slave responds only to master
    No RS485 slave can poll the RS485 bus
    2-wire RS485 - semi-duplex
    Extend the star bus with more M485-REP4-I
    Supply: 10 - +30VDC
    Temp: -25 - +75°C
    For DIN-Rail mounting

    Price 1,223.00 DKK
    Product code: M485-REP4-I
    Physically in stock  
  • USB to 1 x RS232 / RS422 /...

    USB to 1 x RS232 / RS422 / RS485 adapter. 300 - 115.2kbit. Complies with COM signals +/-11Volt. Galvanically isolated

    Serial to USB converter with 1 x RS232/422/485 port
    Respects the +/- 11 volt data signals
    Galvanically isolated on the RSxxx output
    Self-tuner Baud Rate
    Automatic direction control
    Powered from the USB port
    USB connector: Type B
    Supports USB 1.1, 2.0 and 3.0
    COM port: terminal block

    Price 1,196.00 DKK
    Product code: M485-USB-I
    Physically in stock  
  • USB to 1 x RS485 / RS22...

    USB to 1 x RS485 / RS22 adapter, optically galvanically isolated

    Get an RS485 or RS422 port on the PC via the USB port
    Galvanic isolation (optical) 2KV - 3 x 6N137 IC chip
    DB9 male and screw terminal for serial connection
    Baud rate up to 921.6 Kbit/s
    Selection of port type with DIP switch
    Support Win 10, Android
    FTDI chipset FT232RL

    Price 1,288.00 DKK
    Product code: CNV-USB-UNI-I+
    Physically in stock  
  • 1 x USB to RS232 / RS422 /...

    1 x USB to RS232 / RS422 / RS485 adapter, optically isolated

    Get a RS485 or RS422 or RS232 port on the PC via the USB port
    Galvanic isolation (optical) 2KV
    DB9 male and screw terminal to 232/422/485 connection
    Termination by Jumpers
    Baud rate 300bit / s two 921.6 kbit / s
    selectable RS232, RS422 and RS485 via DIP switch
    Supports Win7 / 8/10 and over as well as MAC
    Powered through USB (5V)
    Operating Temp . 0 ° to 55 ° C,

    Price 1,145.00 DKK
    Product code: CNV-USB-UNI-I
    Physically in stock  
  • MODBUS TCP Gateway for...

    MODBUS TCP Gateway for Profibus DP protocol

    Allows PROFIBUS master access to MODBUS TCP devices
    Connect MODBUS devices to a PROFIBUS network
    PROFIBUS baud rate from 9.6k to 12M
    MODBUS TCP 10/100
    Supply voltage: 10 - 30VDC < DIN fitting

    Price 4,022.00 DKK
    Product code: M485-PROFI-M-ETH-I
    On the way in  
  • RS232 til  RS422/485 konverter

    RS232 til RS422/485 konverter

    RS232-RS422/RS485 konverter
    Op til 115,2 kbit/s
    Afstand: Op til 1,2km på RS422/485. op til 15 m på RS232
    Forsyning: 9 VDC, 100mA, strømforsyning medfølger
    Stik: RS232:DB25F,
    RS485: Skrueterminal og RJ11

    Price 873.00 DKK
    Product code: CNV232B485
    On the way in  
  • Ethernet to HART Convert -...

    Ethernet to HART Convert - Master. Allows 2 Master. Gateway.

    Supports HART Short / Long Frame
    Supports Hart Burst Mode
    Supports Point-to-point or Multi-Drop Hart mode
    supports connection of up to 15 Hart slave devices
    Allow 2 Hart Master
    HC_Tool tool for module configuration and HART communication
    support firmware update via Ethernet
    PWR / TXRX indication LED
    4KV ESD protection
    built-in watchdog
    Selectable 250Ω load resistance < Br> 4 Hart Channels
    Support VXCOMM Technology
    Built-in Web Server for Network Setting

    Price 3,554.00 DKK
    Product code: M485-ETH-HART-I
    Physically in stock  
  • Profibus DP Master for...

    Profibus DP Master for Ethernet Slave Devices Gateway. DIN

    Gateway from Ethernet slave to PROFIBUS master
    protocol / hierarchy: DP-V0 Slave
    PROFIBUS Speed ​​(Kbps) in 10 step from 9.6 - 12000
    speed setting is automatic
    Max. Input data length: 240 byte
    Max. Output data length: 240 bytes
    Address setting: 0 ~ 126 Set by DIP switch or EEPROM
    Ethernet protocol: TCP / UDP server / client
    Configuration: Web Configuration

    Price 4,672.00 DKK
    Product code: M485-PROFI-ETH-I
    On the way in  
  • 19" 1U 32 ports RS232 til...

    19" 1U 32 ports RS232 til USB konverter til rackmontering

    USB-32COM-RM - 32-Port RS-232 USB-to-Serial Adapter, Metal Case, Rack-Mountable.

    • High speed
    • 128 byte transmit FIFO & 384 byte receive FIFO
    • Serial port protected with surge protection of 10KV
    • Built-in switching power supply of 100V~240V
    • Standard 19-inch, 1U rackmount chassis
    Price 7,757.00 DKK
    Product code: CNV-USB32RS232
    On the way in  
  • USB to 4 x RS422/485 converter

    USB to 4 x RS422/485 converter

    USB til 4 ports konverter med DB9 stil til DIN skinne montering.

    • Med USB kabel og strømforsyning.
    • Metal kabinet.
    • 4 X RS422/485 porte
    • Hastighed: optil 921.6 Kbpz
    • 4 X DB9 hanstik
    Price 2,690.00 DKK
    Product code: CNV-USB4RS485+
    On the way in  
  • USB to 4 x...

    USB to 4 x RS232/RS422/RS485 converter, isolated

    4-Port RS-232/422/485 USB tilSeriel Adapter, metal kabinet med forlængerkabel. Til DIN skinne montering.

    • Plug & Play
    • DB37 forlængerkabel til 4 DB9 serielporte
    • Metal kabinet.
    • 4 X RS232/422/485 porte
    • High speed serielport baud rate optil 921.6K bps
    • 128 byte transmit FIFO & 384 byte receive FIFO
    Price 2,683.00 DKK
    Product code: CNV-USB4UNI-I+
    On the way in  
  • USB 1 x RS232 adapter, DB9...

    USB 1 x RS232 adapter, DB9 male, USB2.0, MOXA UPORT 1110

    MOXA, 1-port RS-232 USB to serial adapter.

    Compatible with USB 2.0 and 12 Mbps USB data rate
    921.6 Kbps maximum baud rate for super fast data transfer
    Drivers are provided for Windows, WinCE and Linux
    DB9 male. USB2.0 with 80cm cable
    LEDs for displaying USB and TxD / RxD activity
    15 KV ESD protection for all serial ports
    OS support: Windows 11, 10, 8.1, 8, 7, Vista, ME, and XP Windows Server 2022, 2019, 2016, 2012 R2, 2012, 2008 R2, 2008, 2003, 2000, and NT

    Price 575.00 DKK
    Product code: CNV-USB-SER9+M
    Physically in stock  
  • USB til 1 x RS422/485...

    USB til 1 x RS422/485 konverter, MOXA UPORT 1130I

    MOXA USB to RS422/485 converter
    Galvanically isolated.
    1-port RS-422/485 USB-to-serial converter
    Compatible with USB 2.0
    12 Mbps USB data rate
    921.6 kbps maximum baud rate for super fast data transmission
    Drivers provided for Windows, Windows Server, WinCE, and Linux
    Mini DB9 female to terminal block adapter for easy wiring
    LEDs for indicating USB and TxD/RxD activity
    15 kV ESD protection for all serial ports
    2 kV electrical isolation
    Supports Windows 11

    Price 1,535.00 DKK
    Product code: CNV-USB-SER9+MI
    On the way in