Managed 10/100/1000Mbit Robust Industrial Switch
Vibration Safe and dust proof
M12 5 Pin Coded connector
with automatic Bypass for next switch if failure
IEEE 1588v2 Precision Time Protocol (PTP)
PTP is time synchronization in infrastructure
Modbus TCP/IP to SCADA
SMTP / SNMP Trap - generates Email Alarm
IGMP and MLD Snooping for Multicast
VLAN Routing (Layer 3)
CyperSecurity Minimizes safety risk / attacks
Redundant Ring, Fast Recovery
Supply voltage: 9 - 48VDC Redundant Input
Dim: 245 x 140 x 25 mm
Operating temperature: -40 - +75°C
DIN bracket , wall bracket
Weight: 1kg

Converting cable from CRC9 to N
Suitable for connection of external antenna for router
RG174, 50 Ohm
100dB per 100meter at 2GHz
CRC9 male
N male
5 meter

Converting cable from CRC9 to N
Suitable for connection of external antenna for router
RG174, 50 Ohm
100dB per 100meter at 2GHz
CRC9 male
N male
2 meters

4G LTE gateway to old analog telephone
also for Dect Wireless phone with analogue Base
1 x SIM card slot (full size)
2 x RJ11 Connector for 2 phone appliances
Power supply: DC 5V -12V 0.5W (power supply included)
Operating temperature: -10 ~ + 40 ℃
Dimensions: 120 x 85 x 28 mm
exclusive mobile subscription and SIM card

Passive PoE / POC injector for all voltages
Max. Power is 1amp
Voltage up to 48VDC
for UTP and STP Patch Cables
PoE Out: + on Pin 4, 5. - On Pin 7, 8
100Mbit Pin 1, 2, 3, 6
Plastic cabinet
Dim: 75 x 28 x 22 mm

Gigabit PoE and data Extender PoE splitter
1 x RJ45 Data + PoE ++ input
2 x RJ45 Data + PoE + outputs
Standard: IEEE 802.3bt and 802.3at
from injector to Extender up to 100 meters
from Extender to PD Devices Up to 100 meters
IP67 Aluminum Molded cabinet
Temperature range: -40 - + 75 ° C
Plug Play
Wall fittings
Size: 170 X 44 x 73 mm with cable gland

WiFi antenna for 2.4GHz and 5GHz
50 Ohms, 50 Watts
Vertical radiation: 20 degrees
Horizontal radiation: 360 degrees
Bandwidth: 100/950MHz
Dimensions: ∅19 x 495 mm
Both for indoor and outdoor use
Operating temperature -40° - +85°C
Can be mounted directly on the AP-female connector

Surge Protection for 10/100 / 1000Mbit network
Review voltage: 5V / 300mA
review loss: Less than 0.2dB
2 x RJ45 female (in / out)
Protected Pin: 1 - 8 (data)
Threshold at 15V
Max Transient current: 5 - 15k Amp
Operating temperature: -40 - +70°C
Moisture: less than 90% RH
Size: 112 x 38 x 30 mm
Weight: 150g
Earth cable of more than 2.5kvmm must be shorter than 1 meter
Earth resistance must be less than 4 ohms
Nothing can protect against a direct lightning strike

PoE surge protection for 10/100/1000Mbit networks
Supports PoE voltage 48VDC / 40Watt
Nominal discharge: 2.5kA, max. 5kA (8/20myS)
Response time: less than 1ns (nano-second)
Transmission loss: below 0.2dB
2 x RJ45 female (in / out)
Protected pin: 4/5, 7/8 (power supply + data), 1 - 8 (data)
Operating temperature: -40 - +70°C
Humidity: less than 90% rh
Dimensions: 93 x 55 x 35 mm
Weight: 73g
DIN bracket
Ground cable of more than 2.5kv must be shorter than 1 meter
Ground cable thickness: Min. 2.5 sq.mm
Ground resistance must be less than 4 ohms
Nothing can protect against a direct lightning strike

Waterproof Outdoor PoE+ Injector 30Watt
1 x RJ45 Data
1 x RJ45 Data and PoE+
1 x 2-pin DC Phoenix connectors
IK10 Vandal safe
Supply voltage: 24 - 56VDC
POE Standard: IEEE 802.3 at / af
End-Span
Pin: (+ 1.2) (- 3.6)
Operating temperature: -40 - +75°C
wall mounting
Size: 170 x 73 x 44 mm
Weight: 340g

Gigabit PoE splitter for indoor installation

PoE++ (60W) splitter with optional DC output for non-PoE equipment

DC output: 12VDC/5A or 19VDC/3.2A or 24VDC/2.5A

1 x RJ45 port for PoE++ in from switch or PoE Injector

1 x RJ45 port (data) for non-PoE equipment

1 x DC Jack connector (5.5/2.5mm) for equipment

PoE standard: IEEE 802.3at/bt (PoE++)

IEEE 802.3at (PoE+ Mid-span)

IEEE 802-3bt (PoE++ PoH HDBaseT) - type 4

Operating temperature: 0 - +50°C

Wall bracket

Additional DIN brackets

Dimensions: 94 x 70 x 39 mm

Weight: 265g

IP67 and IK10 Gbit PoE injector for outdoor mounting
PoE++ (60W) injector for PoE equipment
1 x RJ45 port for PoE++ out Data+PoE
1 x RJ45 port Data in
1 x Phoenix connector for the input voltage
DC24V 72W input
DC36V 71W input
DC54V 66W input
PoE standard: IEEE 802.3at/bt (PoE++)
PoE out Mid-span / End-span
Operating temperature: -40 - +75°C
Wall bracket
Dimensions: 170 x 73 x 44 mm
Weight: 425

4-port 10/100 / 1000BASE-T RJ45 with IEEE 802.3af / 802.3at PoE injector
1-port 10/100 / 1000BASE-T RJ45 WAN port or LAN port interface (router mode or switch mode )
1 x USB 3.0 port for backing up and restoring configuration file
PoE power is 36Watt per port - automatically Detect PD
PoE monitoring, status, strømbudg PoE port enable / disable, PD live check
IP30 metal housing, DIN bracket
Dimensions: 180 x 140 x 25 mm | Operating temperature: -10 - + 60 ° C
Supply voltage: 48V ~ 56V DC (PSU purchased)
Supports IEEE 802.1Q / D
Security: port filter, MAC filter, IP source protection, anti-DoS

AT Commands Communication
Bandwidth 1.4/3/5/10/15/20MHz
LTE-FDD：B1/B3/B7/B8/B20/B28A
WCDMA：B1/B8
GSM：B3/B8
Input DC 8V-28V
working temperature -30℃-70℃
Dimensions 82 × 84 × 24mm
Max upstream rate 50Mbps
Max downstream rate 150Mbps
RS485/RS232

Network Extender of RJ45 UTP patch cable
PoE transmitted in the cable from the PSE to the PD
1 x 10 / 100Mbit BASE-TX RJ45
Data rate: 94 - 30Mbps auto-optimization
Auto -negotiation / auto-MDI / MDI-X
PoE Standard: IEEE 802.3at / PoE of
Output: 48-56VDC max. 38 Watt
1 x RJ45 to VDSL + PoE
PoE pin: Pin 1/3/5/7 (+ ) 2/4/6/8 (-)
Distance: 100m m / PoE +, 500m w / PoE, without PoE 1000m
Powered by the 48-56VDC min. 2Amp

DNV GL Certified marine network switch
Non-managed 5 port network switch approved to vessels
5 x 10 / 100Mbit Auto-MDI / MDIX
Supply voltage: 18 - 30VDC polarity
Surge, surge protector DC input
Throughput: 148,880 pps at 100Mbit
Dimensions: 110 x 74 x 24 mm
Weight: 145g
Operating temperature: -40 - + 75 ° C
Moisture: 10-90% RH ( no condensation)
DIN fittings, metal enclosure

Indoor Access Point, Gateway, Repeater, Super WDs
Ultra High Speed ​​AP With At the Atlictor Serving Users
Access Point, Gateway, Wisp, Repeater, Super Wds
Wave 2 Technology Increases the data amount to the individual User
Dual Band: 2.4GHz (300Mbps) / 5GHz (867Mbps)
High transmission power, adjustable
1 x RJ45 LAN with PoE + input
1 x RJ45 LAN
Supply voltage at non-PoE: 12VDC / 1.5A
Power Jack DC Input connector: 5.5 / 2.1 mm
2 x 2 5dbi built-in antennas
Transmission power: 100mW
Up to 50 users (Clients)
Dim: 186 x 186 X 36 mm
Operating temperature: 0 - + 40 ° C

Range up to 50 meters in line of sight
point to point, multipoint
signal: RX +, RX (TX +, TX-), GND
connectors: DB9 female 
Bluetooth version 2.0 + EDR
Frequency: 2.400 to 2.4835 GHz
Tx power: Max. 4dBm
Rx sensitivity: -96 dBm
Antenna: Rubber SMA female - external - 2dBi
Supply voltage: 5 to 40VDC, max. 17mA
Operating temperature: -40 to + 85 ° C
Dimensions: 87 mm x 34 mm x 18 mm. Antenna: 11 cm

Cable tester for RJ45 (PatchSee cables)
CAT6 cables
light source supplied
1 pc. test cable included

4-port 10/100 / 1000BASE-T RJ45 with IEEE 802.3af / 802.3at PoE injector
1-port 10/100 / 1000BASE-T RJ45 WAN port or LAN port interface (router mode or switch mode )
1 x USB 3.0 port for backing up and restoring configuration file
PoE power is 36Watt per port - automatically Detect PD
PoE monitoring, status, strømbudg PoE port enable / disable, PD live check
IP30 metal housing, DIN bracket
Operating temperature: -10 - + 60 ° C
Supply voltage: 48V ~ 56V DC (PSU purchased)
Supports IEEE 802.1Q / D
Security: port filter, MAC filter, IP source protection, anti-DoS
LCD touch display - field management, maintenance etc.