Subcategories
-
Switch
-
Routere
-
Antaira
-
Wifi / Wireless communication / LoRa / Modems
-
PoE PSU / PoE Injector / PoE splitter
-
Media Converter RJ45 to Fiber
-
GBIC / SFP modules
-
LAN Extender / Repeatere
-
VDSL - 2-wire or Coax
-
Media Converter - RJ45 to BNC / AUI
-
Alternative to analog telephone line. Analog phone for GSM
-
Ethernet Network Adapter
-
Device servere
-
Portservere
-
Print server
-
Værktøj og tilbehør
-
Galvanic isolation
-
AMIT Industrial 4G/5G products
Active filters
Zigbee Router - Wireless IO module. RS232 and RS485 to Zigbee converter. 2.4GHz ISM frequency band
ISM 2.4 GHz Operating Frequency
Fully Compliant with 2.4 G (IEEE802.15.4/ ZigBee Specifications)
Fully Compliant with ZigBee Pro (ZigBee 2007)
Wireless Transmission Range up to 700 m (Default)
Adjustable RF Transmission Output Power
Supports AES-128 Encryption for the Wireless Communication
GUI Configuration Software (Windows Version)
RS-232/RS-485 Interface Supported
Source Identification for the non-address Device Data Transmission
Supports Broadcast Transmission for the Redundancy Transmission Path
Supports Unicast Transmission to Reduce Network Loading
Supports Topology Utility for Network Monitoring and Improvement
DIN-Rail Mountable
Wifi Dongle Dual Band Network Adapter USB2.0, 300Mbps supports 2.4 and 5GHz
300 Mbps Dual Band WiFi Adapter
USB
Built-in Antenna
Supports 2.4 and 5 GHz
Windows XP (32/64-bit), Vista (32/64-bit),
7 (32/64-bit) and 8 (32/64-bit), Mac OS and Linux
Wireless RS232 connection via Bluetooth - as a set. Up to 100 meters between the two RS232 ports.
Wireless RS232 link between two RS232 ports.
Only available as a set (2 pcs.).
BT Ver 2.0 + EDR Class1
Up to 100meters with accompanying antennas by line-of-sight
Up to 1km with greater external antennas (optional)
automatic connection establishment at power on
with frequency hopping to avoid interference
Baud rate: 1200 - 115.200kbps, 8 data bits, the O / E / No, 1/2 stop bits
Setup baud rate, etc. with Hyper Terminal or the like.
RTS / CTS on / off - DTR / DSR / DCD loop-back
Supports multi-connection: 1 master 4 slaves
Supply voltage: 5 - 12VDC / 80mA
5 port switch 10/100/1000Mbit RJ45 DIN rail - Unmanaged, -40 - +70°C, 10-30VDC
Unmanaged 5 port Ethernet switch
5 x 10/100/1000Mbit, RJ45
Operating temperature: -40 - +70 °C
10 - 30VDC
5 ports switch 4 x 10/100Mbit RJ45 + 1 x ST Multi Mode, DIN - Unmanaged switch
Unmanaged 5 ports industriswitch
4 x RJ45 10/100Mbit
1 x ST fiber 100Mbit Multi Mode
IP50
5 ports switch 4 x 10/100 RJ45 + 1 x SC Single Mode DIN - Unmanaged, 9-30VDC
Unmanaged 5 ports industriswitch
4 x RJ45 10/100Mbit
1 x SC fiber 100Mbit Single Mode
IP50
6 port switch 4 x 10/100Mbit + 2 x 10/100Mbit Rj45 uplink, POE+, Managed, 48VDC Jetnet 4706
REMAINDER SALE
4 x 10/100Mbit RJ45 Managed switch with PoE+
2 x 10/100Mbit RJ45 redundant uplink ports
DC 48V Power Input (power supply not included)
Up to 25 Watts per port
Max. 80 Watt total power
Multiple Super Ring technology (MSRTM), 5ms recovery time
Dual Homing (RDHTM)
IGMP snooping multicast
Built-in hardware watchdog timer for system auto-reset
-40~60°C operating temperature
6 ports switch 10/100 RJ45 Redundant PSU - Unmanaged, 9-30VDC
Unmanaged 6 ports industriswitch
6 x RJ45 10/100Mbit
Redundant PSU input.
8 ports 10/100/1000Mbit RJ45 switch, Unmanaged, 230VAC
8 port 10/100/1000Mbit unmanaged switch in mini format.
Metal chassis.
100 - 240VAC. 9.6 Watts.
AC plug on the back.
VLAN Isolation
Temp: -10 - +70°C
Dimensions: 168 x 93 x 32 mm
AUI for fiber converter, Multi Mode
Multimode version, 850 nm
connector: DB15 Han to Ethernet, ST connector for 10Base-FL
Option Purchase: Aui cable for DB15
Fiber: 62.5 / 125um Multi mode Duplex to 10Base-FL
Max. Length of DB15 Cable of 50m
2 km Max at Multi Mode Cable
0 to 55 degrees (Standard operation)
10 to 90% (non-condensing)
IEEE 10Base-5 / FL Ethernet
sqe on / off
Multimode to Single Mode 100Mbit Fiber converter SC connector. Connector 2 different fiber network
Connect Multimode fiber network with single mode fiber network
1 x 100Mbit Single Mode SC
1 x 100Mbit Multimode SC
Wavelength: 1310 / 1310nm
100Base-SX / LX fiber network
5VDC / 2A adapter included
Multimode and Single Mode Fiber converter 1000Mbit. SC connectors. Merge 2 Fiber network into 1
For the interconnection of single mode and multimode fiber networks
1000Base-SX to 1000Base-LX, SM, 850/1310 nm
only to Gigabit fiber networks.
4 port 10/100/1000Mbit network card, PCIe, high and low profile. Intel i350-T4
4 port Gigabit network card
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
PCI express 2.1 x 4
4 x RJ45
For normal and low profile
PoE Gigabit Injector, 30 Watt PoE+, output voltage between 50-54VDC. 100 - 240VAC
PoE power supply via Ethernet cable, up to 30 watts
LAN without PoE input, provides LAN with PoE
For 10/100/1000Mbit network.
Power supply from 100 - 240VAC / 0.6A
Ethernet over 2-wire connection. VDSL 10/100 / 1000mbit network up to 1.4 km, with PoE output.
Use 2 pcs. Eth-VDSL2 + for an Ethernet connection (Bridge)
up to 1.4 km Ethernet connection with 2 pcs. VDSL devices
Poe over 2-wire connection
1 x LAN 10/100 / 1000Base-T RJ45 Auto-MDI / MDI-X Port
1 x VDSL2 RJ11 She
Splitter for analogously Telephone connection included
Power supply: 54V / 0.74A included
POE + (30W) for eg. Access Point, IP camera.
Prepared for your mounting, wall mounting
Your fittings are purchased
Ethernet over 2-wire connection with VDSL. 10/100Mbit. 4 Ports Switch. Up to 1.4 km between 2 VDSL modules
Use VDSL connection over 2-thread cable where WiFi is an unstable connection
up to 1.4 km above eg. Conducted phone cable with 2 pcs. VDSL modules
Use 2 pcs. ETH-VDSL2+4+ or ETH-VDSL2+A and ETH-VDSL2+4+
Ethernet over 2-wire connection with VDSL
Ideal solution When the network distance is over 100 meters of border
ideal solution when a WiFi Link is an unstable connection
providing a transparent data connection
supply: 5VDC, 2A power supply included
DIP switch: VDSL connection must be set to CPE and the other for CO.
Prepared for your Montage, wall assembly. Your fittings are purchased
Order 2 pcs for a set.
1 PORT MODBUS serial port server, RS232 / RS422 / RS485 Modbus over Ethernet. Can run Modbus TCP Master
MODBUS
Serial Device Server
1 x RS232 / 422/485 port
Atop MB5001C
WIN XP / 7/8 / WIN 10
Web Server Config.
9 ~ 30 VDC
1 port serielportserver RS232 / 422/485 to LAN and Wifi. Serial Device Server DEMO version!
Serial Device Server for RS232 / RS422 / RS485 with WiFi
1 PORT SERIAL PORT SERVER RS232 / 422/485 with 3 x digital input, 3 x relay. 1 x RJ45. 9 - 24VDC.
External COM port and DI / DO via Ethernet and Internet
built-in web server
3 x Shift relays Expanses Max. 30 VDC 1A
3 x digital contact inputs
1 x RS232 (DB9 Male), RS422 or RS485 (screw terminal)
1 x Ethernet 10 / 100Mbit
Power supply from 9 to 24 VDC
1 port serial server RS232 / RS422 / RS485. Serial Device Server RJ45, DB9, 9 - 30VDC
External COM port over Ethernet and Internet
RS232/422/485
Atop SE5201-DB Serial Device Server
10/100Mbit Ethernet.
Serial port via DB9 male connector
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Power is supplied from 9 - 30VDC or 5VDC (power jack)
Power supply not included
DIN kit (option)
Dimensions: 65 x 78 x 28mm (without wall bracket)
Dimensions: 88.5 x 84 x 27.8mm (with wall bracket and DB9 port)
1 port serielportserver via multimode fiber, RS232 / 422/485, up to 2km from fiber switch
Device server til multimode fiber med RS232/422/485 serieport
2 Ports serial port server, 2 x RS232 / 422/485, LAN and WiFi. Serial Device Server over Ethernet. 9 - 48VDC.
External COM ports via Ethernet and Internet
Serial device server to RS232/422/485 with WIFI
Netkort 64bit med SC stik
1000 Mbit/s netkort til lysleder m. SC stik 3,3 V PCI, 64 bit
Galvanic isolation for RJ45 1000MBit network, all 4 pairs are isolated.
Isolator for 1000 Mbit network, one port
Insulation on all 4 pairs.
Transient protector - Remember the earth connection (screw)
2 x RJ45 female
Max. Discharge current (fine LL): 40A (8/20 microSec)
Max. Discharge current (coarse LE): 2.5 kA (8/20 microSec)
Residual voltage: <5V (1.2/50 microSec)
Hi-Pot (Pri to Sec) isolation: 1500Vrms, 1mA, 60 seconds
Cannot transmit PoE
Dimensions: 72 x 50 x 25 mm
SFP transceiver 1000Base-LX, SM, LC, 10km, 0 - 60°C
SFP - Optical Gigabit Transceiver
1000 Mbit
Mini GBIC Media Converter
LC, for duplex fiber cable
Single Mode
1310 nm
Max. 10 km
SFP-Port 1000Base-SX mini-GBIC module - 550m
Mini GBIC / SFP module
LC fiber cables
850nm
Multimode 50 / 125my and 62.5 / 135my
1000Mbit SFP module 1000Base-SX multimode LC, up to 2km with 50my fiber cable
MiniGBIC / SFP optical transceiver
LC fiber cables, 1310nm
up to 2km with 50my fiber cable
typically 500 meters with 62.5my
100Mbit SFP module 100Base-FX, Multi Mode, LC (1310nm), 2km, -40 ~ +75°C
100Mbit SFP multimode optical transceiver
For LC fiber cable
1310 nm
Up to 2 km
Operating temperature: -40 - +75°C
6 ports Gbit switch 4 x RJ45 + 2 x SFP, DIN - Unmanaged, 12-48VDC
Unmanaged Gigabit industriswitch med 4 x RJ45 10/100/1000
2 x SFP - 100/1000Mbit
12 - 48VDC, 7,2Watt
8 Port Gbit switch 230Vac
8-ports Gigabit switch med intern strømforsyning
1 port RS485 / 422 Serial port server. Serial Device Server with RS422 or RS485 can be PoE supplied
1 port RS422 or RS485 serial port with PoE via Ethernet and Internet
surge protection up to 2500 V
24 ports Mid-span PoE injektor, 10/100Mbit, 230VAC
24 ports PoE strømforsyning med 15,4 Watt per port
LAN uden PoE ind, giver LAN med PoE ud
Til 10/100Mbit netværk
10Mbit media converter RJ45 to ST multi-mode fiber 62.5/125 - for older networks
Ethernet 10Base-T / FL Multi-Mode converter
850 nm
Only for 10Mbit fiber - older network systems
RJ45 to Fiber ST
Max. cable length: 2km
Power is supplied from 12VDC 1A
Media converter RJ45 to the fiber. RJ45 10/100/1000Mbit. Fiber 1000Mbit SC Single Mode. 50km
10/100/1000Base-TX til 1000Base-LX, 1550 nm, Single Mode, 50 km
Kun til 1000Mbit fiber, Single Mode
SMS software til GSM modem, Windows, op til 160 modemer
Tilbehør: SMS software til RS232 GSM modem1
GSM 12dBi panel antenna, 3m cable with RSMA he Adapter SMA he supplied
GSM 12dBi panel antenne med 1,8 m kabel mål 23 x 9 cm
Outdoor Quad Band Antenna 850/900/1800/1900 / 2170MHz 2.5 dBi antenna dome, vandal proof round jet, 2.5m cable with SMA he
Vandal secure GSM dome dome antenna for hollow mounting
Quad band - 850/900/1800/1900 / 2170MHz
With 2.5 meters RG 174U cable - SMA he
ABS plastic - with rubber seal Ø47 x 15mm, M10 thread, 12mm
bandwidth ± 90/280 MHz
Gain 2,5dBi
vertical
Max wind speed 200km/h
Wifi module for MiniPCI slot. WLAN for integration
WiFi concealed module for VESA PC
Wireless IrDA interface for the USB port. Infrared communication
Infrared data transfer via USB
Range up to 1 meter
Transfer data through glass pane
RF Combiner - 2 antenner til samme transceiver
Samleled til 2 antenner i ét, 3 x N (hunstik)
Outdoor WiFi antenna amplifier 1 W - 2 way
WiFi booster 1W, 11/54 for outdoor use
2-way Wifi amplifier. NOTE: maximum radiated power must be 100 mW
NOTE: Cable not included
Indoor WiFi antenna amplifier 500 mW - 2 way
WiFi Booster 500mW, 11/54 for indoor use
2-way WiFi amplifier. NOTE: max. Radiated power may be 100 mW
Ethernet Board til RP-E Serien
LAN interface til termisk bonprinter
9 dBi Logperiodisk LTE GSM antenna, short cable with N she, mast bracket
Directional antenna - yagi type
9 dBi outdoor logperiodisk
20 cm coaxial cable with N-type he
two bands 800-960 / 1700-2500MHz
Mast bracket with angle adjustment included
Mechanical lock for RJ45 ports - block RJ45 port with lock and key
Mekanisk lås til RJ45 porte med nølge
20 additional locks to RJ45LOCK-KIT
20 ekstra låse til RJ45LOCK-KIT
1000MBit SFP module, 1000BASE-LX, Single Mode, LC, -40 - +75°C. Up to 10km
MiniGBIC / SFP optical transceiver
LC fiber cables
1310 nm
up to 10 km, single mode
100Mbit SFP module, 100Base-FX, Single Mode, LC (1310), up to 40km
MiniGBIC / SFP optical transceiver
LC
1310nm
Up to 40 km Single Mode