VDSL Extender - transmitter/receiver

IP over 2-wire connection.

Transparent data.

Automatic speed optimization

Plug & play

Supply voltage: 12 - 24VDC

Temperature: -40 to + 60°C

Dimensions: 97 x 85 x 24 mm

PoE extender with 1 x PoE in and 2 x PoE out

PoE extender to 100 meters.

Powered from the PoE source.

Power consumption: 2W

PoE to next extender

Up to 500 meters

100/1000Mbits

IEEE802.3af/at/bt

Temperature: -20 to +60°C

Dimensions: 133 x 73 x 41 mm

Dual-band wireless access point

Maximum speed of 5100 Mbps

5 x internal 3dBi antenna (2.4G x 2, 5G x 3)

Max 256 clients

1x POE/WAN Port & 1x LAN Port

Operating temperature: -10~ 55°C

Supports 48VDC POE and 12VDC input

Dimensions: 220 x 225 x 42.5 mm

Weight: 628g

PoE Extender up to 500 meters

Max speed 100Mbps

Automatic speed control

Consists of Local and Remote Module

The connection is Coax cable

Local module powered from PoE source or DC input

DC input: 48-56VDC

PoE power: 30 Watts

Dimensions: See drawings

Temperature: -20 - +60°C

Flexible VPN security solution with fiber capability

Dual-WAN failover and load balancing

4 x 10/100/1000BASE-T RJ45 Ethernet ports

1 x 1000BASE-X SFP slot for WAN interface

1 x USB 3.0 port for system backup and restore

Supports SSL VPN, IPSec, PPTP and L2TP

Stateful Packet Inspection (SPI) firewall

Content filtering for URL blocking

Power requirements: 100-240V AC, 50-60Hz

Max power consumption: 3.7 watts

Metal enclosure, 1U height, dimensions: 330 x 155 x 43.5 mm

Desktop installation or rack mounting options

Up to 800 meters - Network extender over RJ45 UTP/STP patch cable

PoE is transmitted in cable from PSE to PD

PoE in to RX, PoE out from RX

1 x 10/100Mbit BASE-TX RJ45 with PoE

Data speed: up to 100Mbit auto-optimization

Auto-optimization / auto-MDI/MDI-X

PoE Standard: IEEE 802.3at/af

PoE Output: 48-56VDC from 15.6 to 67 Watts

1 x RJ45 for VDSL + PoE

PoE in (RX) pin 1/2/4/5(+), 3/6/7/8(-)

PoE out (TX) pin:1,2,4,5(+), 3/6/7/8(-)

Distance: 100m w/PoE+, 500m w/PoE, 1000m without PoE

Purchase power supply from 48-56VDC min. 2Amp

Dimensions: 104 x 70 x 30 mm

Long-range LoRa wireless communication (non-LoRaWAN)

RS-485 MODBUS RTU protocol

1x Analog input 0–10V / 0–20mA / 4–20mA / ADC (0–10V)

1x Analog output sync-capable

1x Digital Input High/Low signal detection

1x Digital Output Supports PWM / Latch mode

AES-128/256 encrypted transmission

Rugged IP68-rated waterproof housing

Wide -40°C to 85°C operating temperature

Ideal for industrial, agricultural, and environmental IoT

Low power for remote or battery-powered deployments

DIN bracket, 35 mm

Metal & Silver colored

Frequency: 2.4GHz / 5.8GHz
Gain: 9dBi
Connector: N-Male
Material: Fiberglass
Radiation: Omnidirectional
Length: 400mm
Impedance: 50Ω
Polarization: Linear
Beamwidth: H: 360°, V: 100/75° ±3°
IP Rating: IP67 (Waterproof)
Wind Resistance: 60m/s
S.W.R.: ≤2.0
Max Input Power: 50W
Weight: N.W 140g / G.W 230g
Color: Gray

Wireless Network Card
M.2 Interface
Up to 1.73 Gbps
Wi-Fi 5 (802.11ac)
Bluetooth 5.1
2x MU-MIMO antennas

Outdoor wireless access point / bridge

Dual Band 2.4GHz and 5GHz

867 Mbps at 5 GHz & 300 Mbps at 2.4 GHz

Power Input POE 24V Passive

Software controlled PoE output 24V

Operating temperature -40° - 65°

5 GHz antennas not included

2.4 Ghz antennas built-in

Operating system: OpenWRT

Note: OpenWRT is advanced to use

and requires a good understanding of networks.

Gain: 8dBi

Direction: Omni-directional

VSWR: < 2.0

Polarization: Linear Vertical

Impedance: 50 ohms

Direction: Omni-directional

Antenna connector: RP-SMA male connector

Net weight: 65g

Operating temperature: -20°С ~ +80°С

Storage temperature: -30°С ~ +85°С

Package: 2 x Antenna with 25 cm cable

NOTE: NOT FOR MPCI-E

Wifi Access Point, Bridge, Client.
2.4 GHz and 5 GHz, 802.11ac
Antenna 2x RP-SMA(M)
12-48 VDC, 6.72 W (Max), PoE PD
Operating temperature -10 - +60°C
DIN mounting
Size 47 x 110 x 90 mm

8 + 2 port PoE switch for DIN mounting
Un-managed
8 x 10/100/1000Mbit - RJ45 with auto MDI/MDI-X
PoE+ (30W) - power budget from 60 - 240 Watt
The power budget is determined by the supply voltage
2 x SFP slot 100/1000Mbit fiber port
IP30 metal housing
DIN rail
Redundant Power input
12-54VDC / 7A, redundant, with polarity protection
Standard/extend switch 100/250 meter cable
6000VDC Ethernet ESD protection
Extended temperature -40 to 75°C
IEEE 802.3at
Dimensions: 152 x 106 x 66 mm

8 + 2 port PoE switch for DIN mounting
Un-managed
8 x 10/100/1000Mbit - RJ45 with auto MDI/MDI-X
PoE+ (30W) - power budget is 240 Watt
2 x SFP slot 100/1000Mbit fiber port
IP30 metal housing
DIN rail
Redundant Power input
48-54VDC / 7A, redundant, with polarity protection
Standard/extend switch 100/250 meter cable
6000VDC Ethernet ESD protection
Extended temperature -40 to 75°C
IEEE 802.3at
Dimensions: 152 x 106 x 66 mm

5-Port 10/100/1000BASE-T Gigabit Ethernet Switch
Plug-and-play operation without software installation.
VLAN isolation to prevent multicast or broadcast storms.
10 Gbps bandwidth and 9K jumbo frame support.
Features IEEE 802.3az energy efficient Ethernet standards.
Silent, compact and durable design.
Dimensions: 155 x 86 x 26 mm
Power supply: 5V DC, 1A