8-port 10/100/1000BASE-T Gigabit Ethernet switch.
Plug-and-play operation without software installation.
VLAN isolation to prevent multicast or broadcast storms.
16 Gbps bandwidth and 9K jumbo frame support.
Features IEEE 802.3az energy efficient Ethernet standards.
Silent, compact and durable design.
Dimensions: 168 x 93 x 32 mm.
Power supply: 100-240V AC, 50/60 Hz, 0.2A

5-Port 10/100/1000BASE-T Gigabit Ethernet Switch
Plug-and-play operation without software installation.
IEEE 802.1p and DSCP-based QoS for prioritizing critical applications.
10 Gbps bandwidth and jumbo frame support up to 9K.
Complies with the IEEE 802.3az Energy Efficient Ethernet standard and has a silent, fanless design.
Metal housing with MTBF of 52 years.
Dimensions: 94 x 100 x 27 mm
Power supply: 12V DC, 0.5A (6W)

Managed Industrial switch for harsh environments

Cybersecurity SSHv2/TLSv1.2

Ethernet Ring Protection

e-Mark Certified (vehicles/ITS)

Can support 2.5Gbit SFP module

8 port industrial Gigabit switch, RJ45 with PoE+

Intelligent PoE

2-port SFP 100/1000/2500Mbps

Supply voltage: 48-54VDC

PoE power budget: 240W

Redundant power supply connection

IGMP snooping, MLD snooping

IEEE 1588 Time synchronization protocol

ONVIF - discovery / Floor Map

Modbus TCP real-time (SCADA)

Extended temperature range from -40 to +75 °C

DIN rail or wall mounting

Dimensions: 152 x 107 x 77 mm

Dual Band 802.11ax 3000Mbps Ceiling-mount Wireless Access Point

Max. wireless speed of 2400Mbps (5GHz) & 600Mbps (2.4GHz)

Supports up to 256 simultaneous client users

2 x 10/100/1000BASE-T RJ45 port

4 x Internal 4dBi antenna (2.4G x2, 5G x2)

Modes: AP, Gateway, Repeater

WPA3 / WPA2 / WPA support

Ceiling mount

Dimensions: 185.82 x 185.82 x 36.6 mm

Supports 48V DC PoE and 12V DC input

Operating temperature range: -20 to 55°C

Weight: 380 g

Tang for cable installation 
Krone LSA punch

Wall outlet with RJ45 female plug
STP "shielded Twisted Pair" shielded outlet
Krone LSA puncher is used for mounting cables

8 USB ports, 4x USB-A, 4xUSB-C

DIN mounting

USB 1.1/2.0 compatible

480 Mbps, high-speed USB 2.0

10/100 Base-T Fast Ethernet

Current protection 500mA

Network protocols supported: TCP/IP, Static IP, DHCP

Operating temperature: 0 to 55°C (32 to 131°F)

Power supply: 12VDC, 1.5A

CE, FCC

WLAN LINK - AP (auto WDS), AP (TDMA), Station (WDS/TDMA) and Station (ARPNAT)
Supports ATPC function to reduce mutual interference between the CPEs
WMM (Wi-Fi multimedia) gives higher priority to multimedia transmission
Coverage threshold to limit the weak signal from clients on the line
Real-time Wi-Fi channel analysis graph and client limit control for better performance
Supports Terminal Fast Roaming with 802.11k, 802.11v and 802.11r

Outdoor robust Dual Band Access Point etc.
AP, Gateway, Repeater, Wi-Fi Mesh
2.4GHz and 5GHz, 600/2400Mbit (3000Mbit)
Up to 256 clients Wi-Fi 6
1 x RJ45 Gigabit port PoE+
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-female connector
IP67 cast aluminum housing for mast mounting
Operating temperature: -40 - +70°C
Real-time Wifi channel analyzer
Dimensions: 295 x 231 x 80 mm
Weight: 2.5kg
Supply: PoE, 48V/0.5A (PoE+)

EU standard frequency band network FDD-LTE/UMTS
SMS--Send/Receive/Delete
Wi-Fi 2.4Ghz 802.11g
Up to 10 users have access to WiFi
Nano SIM
5VDC 1A
Up to 150 Mbps MAX download speed
88mm x 28mm x 12.3mm / 25g

600 Mbps Dual band WiFi network card
USB
External antenna

Supports 2.4 GHz and 5 GHz

Windows Vista/XP/2000/7/8/10, for Linux, for MAC OS10.5-10.13

Data, SMS Applications
Standard AT Commands
Digital Input Channel to reset the System
USB 2.0 and  RS-232
DIN-Rail
Modem sells separatly

2x 10Gbit Ethernet RJ45
Max. Data transfer 20000Mbit/s
Net standard IEEE 802.1Q,IEEE 802.3,IEEE 802.3ad,IEEE 802.3x
Vollduplex 10,100,1000,10000 Mbit/s
Full Duplex support
Chipset BCM57810S
Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)
Superior small packet performance
SR-IOV
Active Health Systems support
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor (Sea of Sensors)
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)

Steel whip antenna for LTE, GSM
Magnetic foot
Wide Band 2 - 6 GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
SMA he
Dimensions: 150 mm, Ø30 mm foot

Break the 100 meter limit with VDSL over RG59 coax cable
1 x RJ45 10/100 Mbit
Up to 94 Mbit/s - duplex (automatic speed optimization)
Transparent (untouched) data connection
128-bit AES encryption
Frequencies: 2 - 28MHz
Same device can be Master or Slave (DIP)
Establishes even the best connection
Dimensions: 97 x 70 x 26 mm
Temperature: 0-50°C
5VDC 2A power supply included
75Ω cable must be used
Use 2 pcs. ETH-VDSL-RG for a point to point connection
Use 1 pc. Master for 4 pcs. Slaves - 1:4

4 ch Network extender over 2-wire, RJ45 or Coax cable
Provides transparent Ethernet connection up to 2000 meters
Range with up to 46Mbps: max. 1200 meters COAX
Range with up to 28Mbps: max. 1000 meters RJ11
Range with up to 73Mbps: max. 699 meters RJ45 UTP
Range depends on cable quality etc.
4 x RJ45 for LAN
1 x RJ45 for Link (RJ11 can also fit in the female connector
1 x BNC Coax 75ohm
DIP switch to select Master or Slave mode
Dimensions: 155 x 86 x 26 mm
Cabinet: Metal
Weight: 347g
Supply voltage: 12VDC/1A
Temperature: 0 - +50°C

Steel whip antenna for Access Point
Magnetic foot
Dual Band 2.5GHz / 5.8GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
RP-SMA male / RSMA male connector
Dimensions: 150 mm, Ø30 mm foot

Compact 5 port Ethernet switch for 100Mbps
Not Managed
Very economical: max. 2 Watt
Supply voltage: 12 - 48VDC
Can also be powered with 24VDC
With redundant voltage input
Dimensions: 104 x 70 x 30 mm
Weight: 255 grams
IP30, metal housing
DIN bracket

Function LTE-based WAN expansion for various IP networks

Applications Enterprise, surveillance, WiFi hotspots

Dual SIM For ISP fail-over

Web-UI Basic settings, CLI and Command Script for advanced settings

Ethernet Ports 1 configurable WAN & 2x Fast Ethernet

Includes WiFi support

Micro-SD Slot for log storage

Power Input DC 5-18V

Operating Temperature -30°C ~ 70°C

Weight 220g

Dimensions 93x90x27mm

4 port PoE pass through - 10/100/1000Mbit
1 x RJ45 PoE in (data + PoE++) - 95 Watt
Mid-span and End-span
4 x RJ45 PoE out (data + PoE+) - 30 Watt
PoE out pin: +1/2, -3/6
PoE output power, total is max. 75 Watt
PoE input voltage 50 - 57VDC
Temperature: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
Your bracket