Outdoor gateway

Protocol LoRa (not LoRaWAN)

Frequency range 410–525 MHz / 862–1020 MHz (depending on local regulation)

Sensitivity Up to –136 dBm @ SF=7 / 10.4 kHz bandwidth

RF power Max. 2 W

Interface RS-485 × 1 / Analogue or Digital Input × 5 / Digital Output × 5

Serial Baud Rate 1200–230 400 bps

Encryption AES-128 / AES-256

Analog Input 0–10 V / 0–20 mA / 4–20 mA / ADC (0–10 V)

Digital Input High/Low signal rating

Digital Output PWM / Latch mode

Topology types Broadcast / Group / Peer-to-Peer

lestariautomation.com

Material Flame retardant

Dimensions 10 × 10 × 4.8 cm (without antenna and external connections)

Weight 250g

IP rating IP68

Operating temperature –40°C to 85°C

Input supply 12–36 V DC / 1 A

Output supply Main port: 10 V DC / 100 mA; AUX2–AUX5: 10 V DC / 50 mA

Power consumption Receiving: 24 V 15 mA @868/920 MHz, Sending: 24 V 400 mA @868/920 MHz (2 W)

Industrial Single Mode Media Converter

100Mbit FX

Single Mode fiber (9/125)

SC - duplex

10/100Mbit RJ45

IEEE802.3U

Fiber: 15 km

RJ45 100 meters

Supply voltage: 5VDC

Temperature: 0-50°C

Dimensions: 94 x 70 x 26 mm

Weight: 0.2kg

Surge protection - NOT galvanic isolation

Transmits PoE

Standard RJ45 ports – Supports Cat5, Cat5e, Cat6, and Cat7 connectors.

Full 8-pin protection – Ensures stable power and data transfer to PoE devices.

High-quality components – Premium surge protection elements extend the lifespan to approximately five years.

Low insertion loss – Less than 0.2 dB, maintaining high-quality network signal transmission.

Standard desktop installation – Designed for easy and stable placement

Durable aluminum housing – Improves heat dissipation and fire resistance

IP67 waterproof rating – Provides excellent protection against dust, water and harsh environmental conditions.

Surge Protector for Gigabit Networks

Transient protection

Accepted voltage on network: 48Volt

Max. voltage on network: 60Volt

Response time: <25 nanosecond

Insertion loss: 0.2dB

Temperature: -40 to +80°C

DIN-mounted

Surge protection - NOT galvanic isolation

NOT FOR POE - Max DC is 20VDC !!

Standard RJ45 ports – Supports Cat5, Cat5e, Cat6, and Cat7 connectors.

Full 8-pin protection – Ensures stable power and data transfer to PoE devices.

High-quality components – Premium surge protection elements extend the lifespan to approximately five years.

Low insertion loss – Less than 0.2 dB, maintaining high-quality network signal transmission.

Standard desktop installation – Designed for easy and stable placement

Durable aluminum housing – Improves heat dissipation and fire resistance

IP67 waterproof rating – Provides excellent protection against dust, water and harsh environmental conditions.

Working Voltage Un (V) 6/12

Limiting Voltage Up (V) 20

Normal Discharge Current In (kA) 5

Maximum Discharge Current Imax (kA) 10

Response Time (ns) 1

Insertion Loss (dB) ≤0.2

Transmission Rate (bit/s) 1000M

Working Temperature -40℃～+80℃

VDSL Extender - transmitter (receiver)

IP over 2-wire connection.

Transparent data.

Automatic speed optimization

Plug & play

Supply voltage: 12VDC

Temperature: -40 to + 60°C

Dimensions: 97 x 85 x 24 mm

VDSL Extender - transmitter/receiver

IP over 2-wire connection.

Transparent data.

Automatic speed optimization

Plug & play

Supply voltage: 12 - 24VDC

Temperature: -40 to + 60°C

Dimensions: 97 x 85 x 24 mm

PoE extender with 1 x PoE in and 2 x PoE out

PoE extender to 100 meters.

Powered from the PoE source.

Power consumption: 2W

PoE to next extender

Up to 500 meters

100/1000Mbits

IEEE802.3af/at/bt

Temperature: -20 to +60°C

Dimensions: 133 x 73 x 41 mm

PoE Extender up to 500 meters

Max speed 100Mbps

Automatic speed control

Consists of Local and Remote Module

The connection is Coax cable

Local module powered from PoE source or DC input

DC input: 48-56VDC

PoE power: 30 Watts

Dimensions: See drawings

Temperature: -20 - +60°C

DIN bracket, 35 mm

Metal & Silver colored

Long-range LoRa wireless communication (non-LoRaWAN)

RS-485 MODBUS RTU protocol

1x Analog input 0–10V / 0–20mA / 4–20mA / ADC (0–10V)

1x Analog output sync-capable

1x Digital Input High/Low signal detection

1x Digital Output Supports PWM / Latch mode

AES-128/256 encrypted transmission

Rugged IP68-rated waterproof housing

Wide -40°C to 85°C operating temperature

Ideal for industrial, agricultural, and environmental IoT

Low power for remote or battery-powered deployments

Reinforcement: 8dBi
Direction: Omni-directional
Frequency range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz
VSWR: < 2.0
Polarization: Linear Vertical
Impedance: 50 ohms
Direction: Omni-directional
Antenna connector: RP-SMA male connector
Net weight: 65g
Operating temperature: -20°С ~ +80°С
Storage temperature: -30°С ~ +85°С
Package: 2 x Antenna with 25 cm cable
NOTE: NOT FOR MPCI-E

Data, SMS Applications
Standard AT Commands
Digital Input Channel to reset the System
USB 2.0 and  RS-232
DIN-Rail
Modem sells separatly

Compact 5 port Ethernet switch for 100Mbps
Not Managed
Very economical: max. 2 Watt
Supply voltage: 12 - 48VDC
Can also be powered with 24VDC
With redundant voltage input
Dimensions: 104 x 70 x 30 mm
Weight: 255 grams
IP30, metal housing
DIN bracket

Break 100 meter border with VDSL over RG59 Coax cable
1 x RJ45 10/100 / 1000Mbit
Up to 300mbit / s - duplex (automatic speed optimization)
Unroubing Data connection
Temperature: 0-50 ° C
5VDC 2A Power supply included
75Ω cable must be used
Use 2 pcs. Eth-VDSL-RG + G to a connection

Ethernet med PoE over RG59 Coax-kabel - VDSL princip. 
Forlæng PoE-forbindelsen op til 500 m via Coax kabel
Egnet til IP kamera m/Poe over eksisterende Coax-kabler.

REMAINING STOCK

Ethernet over telephone cable 1 x twisted pair cable

VDSL module with 8 port switch and SFP slot

Up to 100Mbps at 300 meters

Up to 1km - automatic speed adjustment

Break the 100 meter limit with a VDSL connection

Transparent data connection

8 port VDSL2 switch with 2 shared RJ45/SFP ports

Purchase ETH-VDSL2ROUTER to create a link

Transparent Ethernet connection up to 1200 meters
Medium range from 11 - 80 Mbps up to 1200 meters
Long range from 14 - 89 Mbps up to 700 meters
Range depends on cable quality etc.
Note: 2 pcs. to make a connection.
1 x RJ45 for LAN
1 x RJ45 for Link (RJ11 can also fit in the female connector
DIP switch to select Master or Slave mode
Dimensions: 97 x 70 x 26 mm
Cabinet: Metal
Weight: 189g
Supply voltage: 5VDC/2A
Temperature: 0 - +50°C

10/100 / 1000Mbit PoE Network Extender
Extend the network cable with PoE over the magic 100 meters
Extenders are powered from PoE and pass PoE on to the next Extender
Dimensions: 94 x 70 x 26 mm

PoE In: Max 95 Watts

PoE Out: Max 65 Watts
Weight: 189g

Next-gen Wi-Fi 6 (802.11ax) with speeds up to 1.8Gbps

Dual-band (2.4GHz & 5GHz) with MU-MIMO for high-density environments

Robust VPN features: IPSec, SSL, PPTP, L2TP, GRE (up to 60 tunnels)

Built-in SPI firewall, DoS/DDoS protection, content & IP filtering

Dual-WAN with failover, load balancing & high availability support

Central AP controller with captive portal and RADIUS

Optional PoE+ version with 4-port 802.3at PoE and PD alive check

Easy deployment via setup wizard, dashboard, and remote management