Network products / Wifi / PoE / RJ45-Fiber

8 x 10/100 / 1000Tx RJ45 for PoE + (30W / port) IEEE 802.3at for 2 x 100/1000 SFP ports for Auto MDI / MDI-X Function for Store-and- Forward Switching Architecture
20Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC for UL Class I , Division 2 Certified
Supply Voltage: 48 ~ 55VDC
Built-in Relay Output for Power Failure for IP30 Rugged Metal Case Design for DIN Rail and Wall Mounting - Operating Temperature: -40 ° to 75 ° C

8 x 10/100 / 1000Base-T (X) RJ45
PoE (P.S.E.) Ports
IEEE 802.3at
Up to 30 Watts Per Port
9.6Kbytes Jumbo Frame
Supply Voltage, Dual Wide Range 12 ~ 36VDC
Auto-Negotiation & amp; Auto-MDI / MDI-X
Store-and-Forward Transmission, Flow Control, IP-30 Housing Design
DIN Rail and Wall Mounting for UL Class I, Division 2 Certified

5 x 10 / 100Tx RJ45 fast Ethernet
M12 (D-coded female) Connector IP67 protected
IP67 Plastic Case Design
RJ45 Port Support Auto MDI / MDI-X
Auto Negotiation speed, Half / Full Duplex
Store-and-Forward Switching Architecture
Power Supply: 12 ~ 48VDC
Power Polarity Reverse Protection
Overload Current Protection
DIN-Rail or Wall Mounting
Dimensions: 37.13 x 215.73 x 32.8 mm (W x H x D)
Operating temperature: EOT: -40 ° C to 75 ° C

5 x 10 / 100Tx RJ45 Fast Ethernet
M12 (D-coded female) Connector IP67 Protected
IP67 Plastic Case Design
RJ45 Port Support Auto MDI / MDI-X
Auto Negotiation Speed, Half / Full Duplex
Store-and-Forward Switching Architecture
Supply Voltage: 12 ~ 48VDC
Power Polarity Reverse Protection
Overload Current Protection
DIN Rail or Wall Mounting
Dimensions: 37.13 x 215.73 x 32.8 mm (W x H x D)
Operating temperature: STD: -10 ° C to 70 ° C

Supporter 8-Port 10 / 100Tx
2 Gigabit Combo Ports
6 x RJ45 Port 10 / 100Tx
2 x 10/100/100 RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X
Non-Blocking Switching Fabric
8K MAC Address
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
1 x Built-in Relay Output for Power Failure Warning
IP30 Rugged Metal Case Design
DIN Rail and Wall Mounting
Operating Temperature EOT: -40 ° to 75 ° C

Supporter 8-Port 10 / 100Tx
2 Gigabit Combo Ports
6 x RJ45 Port 10 / 100Tx
2 x 10/100/100 RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X
Non-Blocking Switching Fabric
8K MAC Address
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
1 x built-in relay Output for Power Failure warning
IP30 Rugged Metal Case Design
DIN rail and wall mounting
Operating temperature STD: -10 ° to 70 ° C

Supporter 6-Port 10 / 100Tx and 2 x Gigabit Combo Ports
2 x 10/100 / 1000Tx RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
8K MAC Address Table
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
Built-in 1 x Relay Output for Power Failure Warning
IP30 Rugged Metal
Wall and DIN Rail Mounting
Operating Temperature EOT: -40 ° to 75 ° C

Supporter 6-Port 10 / 100Tx and 2 x Gigabit Combo Ports
2 x 10/100 / 1000Tx RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
8K MAC Address Table
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
Built-in 1 x Relay Output for Power Failure Warning
IP30 Rugged Metal
Wall and DIN Rail Mounting
Operating Temperature EOT: -40 ° to 75 ° C

2x SFP module for VDSL2Sold as a pair of 2 SFP modules, 1x receiver & 1x transmitter
Mounted in contacts with SFP slot
RJ45 connector (for 2 wires)
Up to 2 km, depending on the cable quality
Temperature: -20°C to 75°C
Power consumption of 3W from SFP port

4 x 10/100 / 1000Tx IEEE 802.3at PoE + Compliant with 30W per Port
1 x 10/100 / 1000Tx & nbsp;
2 x 100/1000 SFP
Auto MDI / MDI-X Function < br> 14Gbps Back-Plane (Switching Fabric)
8K MAC Address
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Power Supply: 12 ~ 36VDC
Built-in 1 x Relay Output for Power Failure Detection
IP30 Rugged Metal Case Design
Your rail and wall mounting
Operating temperature -40 ° to 75 ° C
Dimensions: 46 x 99 x 142mm
Weight : 1.4 Lb

5GHz, 900Mbps AP, Gateway, Repeater, Bridge, WISP
802.11 b/g/n/ac
2T2R architecture with dual-polarizing 14dBi antennas built-in
Transmission power: 100mW
2 x 10/100/1000Mbps RJ45 Ethernet
For pipe mounting and wall mounting - clamping band included
Supports WAN connection in DHCP, Static IP, PPPoE
WPA/WPA2, WPA-PSK/WPA2-PSK and 802.1X RADIUS authentication
IP55
Power supply: PoE+ (48Vdc) or 12VDC 1A (via DC jack)
Operating temperature: -20 - +70°C
Dimensions: 260 x 87 x 38 mm

Industrial access point with Atheros XSPAN chipset

IEEE 802.11 a/b/g/n

2 x 10/100Base-TX WAN/LAN Ports

2 x external antennas

WLAN single radio

Tx Power 21 dB for 2.4GHz

Tx Power 18 bB for 5GHz

WPA, WPA2, TKIP, AES

Power Input: 9~48VDC in 6-Pin Terminal Block

Reverse Polarity Protection

IP30 Density

DIN rail or wall mounting

Operating temperature: 0°C to 60°C

Dimensions: 30 x 140 x 95mm

Weight: approx. 1 KG (0.60 lbs)

WLAN up to 150MBps (Single radio 2.4GHz)

Industrial 1x1 SISO (Single Input Single Output)

IEEE 802.11 b/g/n

2*10/100Base-TX WAN/LAN Port

Chipset: Qualcomm/Atheros AR9331 SoC

Tx Power (EIRP) 21 dB for 2.4GHz

WPA, WPA2, TKIP, AES

Power Input: 9~48VDC in 4-Pin Terminal Block

Reverse Polarity Protection

IP30 Protection

DIN-Rail and wall mounting

Operating temperature: -40° to 75°C

Weight: 1.0 lbs (approx. 1 kg)

Dimensions: 26 x 95 x 75 mm

WLAN up to 150Mbps (Single radio 2.4GHz)

Industrial 1x1 SISO (Single Input Single Output)

IEEE 802.11 b/g/n

2 x 10/100Base-TX WAN/LAN Port

Chipset: Qualcomm/Atheros AR9331 SoC

Tx Power (EIRP) 21 dB for 2.4GHz

5 dBi dipole antenna

WPA, WPA2, TKIP, AES

Power Input: 9 - 48VDC / 2W, 4-pin Terminal Block

Reverse Polarity Protection

IP30 sealed enclosure

DIN rail and wall mounting

Operating temperature: 0°C to 60°C

Weight: 1 kg

Dimensions: 26 x 95 x 75 mm

1 x 10/100/1000Mbit RJ45
1 x 1000Mbit SFP (only for Gigabit SFP modules)
up to 80km with Single Mode fiber
up to 550m with Multi Mode fiber
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
BIDI with LC or with SC (Simplex fiber)
Purchase additional Gigabit SFP modules.
up to 100m with Cat.5e or Cat.6
5% to 95% humidity
5VDC power supply included
-0°C to +70°C

8 x 10/100 / 1000BASE-T RJ45 Auto-MDI / MDIX Ports
2 x 1000BASE-SX / LX / BX SFP Interface
8 POE Injector Ports with 802.3ay / of
PoE Standard 802.3at
60GB non-blocking
32Mbits Data buffer
IEEE 802.3X pause frame for duplex
IP30 aluminum
Din rail kit and wall mounting
Alarm relay 1A, 24V DC
2 x Digital output (DI)
2 x Digital output (DO) 24v DC, 100mA max
Dimensions: 72 x 107 x 152mm
Weight: 1684g & nbsp;
Supply: 48-56 V DC

24 x 10/100 / 1000BASE-T Gigabit RJ45 copper ports
4 x 10GBASE-SR / LR SFP + ports, compatible with 1000BASE-SX / LX / BX SFP
RJ45 console port
LCD touch screen
Operating temperature 0 to +50 ° C
Humidity 5 ~ 95% (non-condensing)

Unmanaged 8 ports 10/100/1000Mbit switch
1.5Mbits SRAM packet buffer
IP30 metal case
DIN rail and wall-mount
-40 to 75 degrees C operating temperature
12 to 48V DC input (power supply is not included)

Use VDSL connection over 2-wire cable, where Wifi is an unstable connection
Provides a network connection without affecting data
Up to 1.4 km Ethernet bridge over e.g. 2-wire laid down telephone cable
Speed depends on cable and length - up to 90Mbps
Automatically adjusts speed to highest speed
Can also communicate with ETH-VDSL2+4+ (with 4 port switch)
1 x LAN 10/100 BASE-T RJ45 auto-MDI/MDI-X port
1 x RJ11 female (pin 3 and 4)
Supply: 5VDC, 2A power supply included
DIP switch: VDSL connection, one must be set to CPE and the other to CO.
Prepared for DIN mounting, wall mounting. Your bracket is purchased separately
SOLD SINGLELY! Order 2 pieces for a set.

10GBase-BX
Single Mode
0 ~ 60°C
Op til 20km
TX: 1330nm, RX: 1270nm

Crimping pliers for easy and fast production of cables
For RJ45 and RJ11 cable and modular connectors
The new connectors have wiring through for faster and secure mounting
When the cable is crimped on the connector, the cable ends are automatically cut by
Squeezes the conductors down the plug terminals and cuts the ends in the same workflow.

10GBase-BX SFP optical transceiver
To 1-Simplex fiber cable
1 x LC Single Mode 1-core cable
0 ~ 60 ° C
Up to 20km
TX: 1270nm , RX: 1330nm
Note: Reverse TX / RX frequencies at the other end of the fiber

10Gbit fiber the RJ45 Media converter
For Single Mode or Multi Mode SFP module
Extended temperature range
1 x RJ45 10G/5G/2.5G/1G/100M BASE-T
1 x 10GBASE-SR/LR SFP slot
The SFP module is standard with an LC connector
Additional SFP module
Supply voltage: 12 - 48VDC
PSU not included
Operating temperature -40 to +75°C
YOUR bracket

Dual-Polarized 2.4GHz Panel Antenna Provides Best Connect To Portable Devices With Wifi
Has Both Horizontal And Vertical Polarization In The Same Antenna
14dBi High gain Antenna
Horisontal and vertical: 30°
IP55 Close
Compact Lighting Lighting Antenna to the 2 N-female connector
Ideal for good wireless coverage

4 x RJ45 port with PoE ++ (Ultra PoE)
1 x RJ 45 Uplink port (not PoE).
60W for every PoE-Port
Power Budget is 120 watts
IEEE 802.3at / by PoE.
Dip on / off PoE 
Power supply: 100 - 240VAC 
Operating temperature: 0 - +40°C
Size: 119 x 88 x 27 mm
Weight: 1.3 kg

PoE splitter with voltage selector for 5, 9.12.18 Volts
Up to max. 30W
IEEE 602.3af/at(POE) IEEE 802.3 (Ethernet)
IEEE 802.3U, IEEE 802.3ab (Gigabit Ethernet)
1 x 10/100/1000 Mbit RJ45 PoE port (data + power input)
1 x 10/100/1000 Mbit RJ45 LAN port (data only)
1 x DC plug 5.5 / 2.1 mm - Output voltage (DC out)
Cat. 5E, 6 UTP
DC voltage from PoE switch or Injector 36 to 57 VDC
2 x RJ45 Note PoE does not go back to the RJ45 output - only data!
ROHS, CE, FCC (FCC Part15, Class B)

Power over Ethernet - No Additional Power Source Required
Extend a POE signal max. 100m over a single CAT cable (cat 5 or higher)

5 Ports & nbsp; Switch with 4 PoE ports
4 x PoE RJ45
1 x Uplink RJ45
1 x SFP
Ethernet standard: IEEE802.3, IEEE 802.3u, IEEE802.3af / at
Power Supply: DC48V - 52V

PoE++: 60W for each PoE port
PoE power budget is 120W
Unmanaged switch
IEEE 802.3at / of PoE compliant
Current protection: OVP, OCP, SCP
Compact design with wall-mounted capability
UL / CB certified external power supply
Power supply: 56VDC 2.1A
Per port PoE (Mode A, Mode B) On-Off Control by DIP Switch
Dimensions: 119 x 88 x 27 mm
Temperature: 0 - +40°C

10/100/1000Mbit network extender / PoE splitter
1 x PoE input (PD) PoE++ 95W
4 x PoE outputs (PSE) PoE+ 32W
Up to 32W per PoE port, 65W total power budget (see specifications)
Extend the network cable over the maximum 100 meters for PoE solutions
Extenders are powered by PoE and pass PoE on to the next extender
Dimensions: 168 x 93 x 32 mm, Weight: 403g

Ethernet adapter. USB-C 3.1, 2 x RJ45 10/100/1000 & nbsp; Full Duplex
USB-C 3.1 Male connector for IEEE 802.3i/u/ab
Power supply via USB
OS support: Windows & nbsp; 7 /8/8.1/10 (32/64-Bit), Mac OS X 10.6 / 10.7 / 10.8 / 10.9 / 10.10, Linux 2.6.27 and later

5 x 10/100 / 1000Mbit RJ-45 with 4 ports with PoE +
PoE + is 30.8 Watt. PoE max 134 watts, end-span
Auto detects PoE equipment and protects against damage by non-PoE equipment
PoE up to 100 meters
Layer 2 switch with auto-negotiation
IP30 aluminum metal cabinet, DIN Fittings
DIN Rail and Wall Mount
48V DC Redundant Power Input
EFT Protection Up to 6kV for Power Line
6kV Protection on Ethernet Port
-40 to + 75 ° C & nbsp;

Managed Industrial switch. 24 x RJ45, 4 x SFP
24 x 10/100/1000Mbit RJ45 ports PoE++
IEEE 802.3at/af/bt - Ultra PoE (90Watt) end/mid-span
Total PoE power is 775W
4 x 100/1000/2500Mbit mini-GBIC / SFP slots, Combo with 4 Gbit RJ45 SFP
10GB SFP
VLAN - IEEE 802.1Q tagged VLAN
VLAN (Q-in-Q) - IEEE 802.1ad
Protocol VLAN, Voice VLAN, Private VLAN, Management VLAN, GVRP
IGMP snooping v2 and v3
MLD snooping v1, v2
Port security for source MAC address filtering
DHCP snooping to filter unwanted DHCP messages
Dimensions: 440 x 300 x 44 mm (1U)
Weight: 4.4 kg
Supply voltage: 100 - 240VAC

The 16-port 10/100Mbit + 2 Gigabit RJ45
2 x 1000BASE-X mini-GBIC SFP combo interface.
PoE + is 32 Watt
Max. PoE power is 300 watts
IEEE 802.3af / at End-span.
Each port provides 54VDC to PoE equipment.
Auto deteketere PoE equipment.
Provides PoE power to the max. 100meters.
extended mode without PoE, the distance up to 250meter.
Equipped with smart LCD.
Dimensions: 440 x 233 x 44 mm (1U)
Operating temperature: -10 - + 60 ° C
Supply voltage: 100 - 240VAC, 5A

Antenna for GPS, 2.4GHz WIFI, 4G, LTE
5MHz bandwidth
Screw mounting
4 meter cable
Temperature: -40 - +85℃
Full IP67 Waterproof

& nbsp; Antenna to GSM, GPS, FM, AM
5MHz Bandwidth
Screw Mounting
4m Cable
Temperature: -40 ℃ ~ + 85 ℃
Full IP67 Waterproof

Omni antenna for 4G, LTE, vandal-proof
Screw Mounting, M12 Thread
3 meter Cable
Temperature: -40 ℃ ~ + 85 ℃
Connector: SMA Male

> Ø54 x 24mm, M12 thread, 19mm
Bandwidth ± 90/280 MHz
Gain 3dBi
Vertical vertical
Max wind speed 200km / h

Original Intel antenna
2.5 / 5GHz
2 x RSMA male, 1.2 meter cable
Suitable for wall mounting

Wifi antenna, dual band
2.4/5GHz
For mounting on a car window or window
3 meter cable
RP-SMA Male

For harsh industrial and outdoor environments.
Voltage over Ethernet - PoE - no external voltage source
Extend a PoE voltage and data signal up to 100m
PoE output power: up to 22Watt
Over a single CAT 6 cable (STP cables are recommended).
Cascade: Maximum 4 ETH-BOOST-POE-1G-U units in extension
Extends the distance up to 500m
IP66

Highly reliable and secure 4G LTE Router

Dual SIM - automatic fallover

Wifi - Access Point with Hotspot function

1 x WAN RJ45 port

3 x LAN RJ45 ports

Modbus TCP Slave / Master

Modbus data server - MQTT, Azure, HTTP(S)

MQTT Gateway

1 x DI/DO

Supply voltage: 9 - 30VDC 7W

Dimensions: 110 x 100 x 50 mm

Option: Purchase DIN bracket

RJ45 two RJ45 Thunder Protector (IP only)
Thunder Protector protect two lightning over-voltage
Surge Over-voltage and electrostatic discharge.
Maximum discharge current 10KA
Aluminum Case with two RJ45 Port

PCI-Express micro card
IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n
Bluetooth 4.0
Wireless 2.4GHz + 5GHz

MPCIE WLAN modul
fra 2.412 til 2.462 GHz
802.11b/g
Power output 177 mW

1000 meter - network extender over coax cable.
Poe transferred in cable
1 x 10 / 100mbit base-TX RJ45
Auto-Negotiation / Auto-MDI / MDI-X
Poe Standard: IEEE 802.3AT / BY
PoE Output: 48-56VDC Max. 25 Watt
PoE Mode: End-Span, RJ45 Pin 1/2 (+), 3/6 (-)
1 x BNC Hun - RG59 Coax
Max. Distance: 200m w / Poe +, 1000m w / Poe, 1600m without Poe
Power supplied from 48-56VDC min. 2amp

Access Point antenna for 2.4 / 5.8GHz
9 dBi High Gain
Indoors
Dual Band
Hard plastic - black
50 ohms
RP SMA male (brass) connector
Length: 39cm
Cracked joint

LTE 3G 2G GSM antenna on magnetic base
3.5 dBi
Waterproof - IP65 tight
SMA male connector (sleeve + pin)
3.5m cable
600 - 900 / 1700 - 2600
Dimensions: height 110 mm, foot diameter 30 mm

Please note this product is EOL and of older vintage. We only recommend it to users who have experience with old analogue model/telephone technology.

If you don't have experience with the older technology, don't jump into it, that's our recommendation.

Chipset: Broadcom BCM5761

Interface: PCI Express x1 (some versions use x4 or x8)

Network speed: 10/100/1000 Mbps (Gigabit Ethernet)

Port type: 1 x RJ45 (copper)

Controller: NetXtreme Gigabit Ethernet controller

Supported features: PXE boot (Preboot Execution Environment), Wake-on-LAN (WoL)

TCP/UDP/IP checksum offload

VLAN tagging (802.1Q)

MSI-X support (Message Signaled Interrupts)

ACPI (Advanced Configuration and Power Interface)

Drivers available for:

Windows Server

Linux (via kernel or Broadcom driver)

VMware ESXi (depending on version)