Network products / Wifi / PoE / RJ45-Fiber

Ethernet 10Base-T / FL Multi-Mode converter
850 nm
Only for 10Mbit fiber - older network systems
RJ45 to Fiber ST
Max. cable length: 2km
Power is supplied from 12VDC 1A

24 ports PoE strømforsyning med 15,4 Watt per port
LAN uden PoE ind, giver LAN med PoE ud
Til 10/100Mbit netværk

1-Port RS-422/485 to Ethernet device server

1x 10/100 Mbps RJ45 LAN

DB9 male or 5-pin terminal block serial connector

Baud rates: 300 to 115.2 kbps

Configurable: 6/7/8 data bits, 1/2 stop bits, parity None/Odd/Even

Built-in watchdog for reliable 24/7 operation

Wide power input: 7–40 VDC (DC jack) / PoE (48 VDC via Ethernet)

Industrial metal enclosure, ~300 g

Operating temp 0–55 °C; humidity 5–95% RH

IS model adds 2.5 kVrms isolation & 500 W surge protection

Unmanaged Gigabit industriswitch med 4 x RJ45 10/100/1000
2 x SFP - 100/1000Mbit
12 - 48VDC, 7,2Watt

Your rail bracket 2 pcs.

100Mbit SFP multimode optical transceiver
For LC fiber cable
1310 nm
Up to 2 km
Operating temperature: -40 - +75°C

MiniGBIC/SFP optical transceiver

LC fiber cables, 1310nm

Up to 2km with 50my fiber cable

Typically 500 meters with 62.5my

Mini GBIC / SFP module
LC fiber cables
850nm
Multimode 50 / 125my and 62.5 / 135my

SFP - Optical Gigabit Transceiver

1000 Mbit

Mini GBIC Media Converter

LC, for duplex fiber cable

Single Mode

1310 nm

Max. 20 km

Isolator for 1000 Mbit network, one port
Insulation on all 4 pairs.
Transient protector - Remember the earth connection (screw)
2 x RJ45 female
Max. Discharge current (fine LL): 40A (8/20 microSec)
Max. Discharge current (coarse LE): 2.5 kA (8/20 microSec)
Residual voltage: <5V (1.2/50 microSec)
Hi-Pot (Pri to Sec) isolation: 1500Vrms, 1mA, 60 seconds
Cannot transmit PoE
Dimensions: 72 x 50 x 25 mm

1000 Mbit/s netkort til lysleder m. SC stik 3,3 V PCI, 64 bit

External COM ports via Ethernet and Internet

Serial device server to RS232/422/485 with WIFI

Device server til multimode fiber med RS232/422/485 serieport

External COM port over Ethernet and Internet
RS232/422/485
Baud rate: 1200 - 230.4kbps (2-wire)
Max. baud rate at 4-wire RS485 up to 921.6kbps
Atop SE5201-DB Serial Device Server
10/100Mbit Ethernet.
Serial port via DB9 male connector
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Power is supplied from 9 - 30VDC or 5VDC (power jack)
Power supply not included
DIN kit (option)
Dimensions: 65 x 78 x 28mm (without wall bracket)
Dimensions: 88.5 x 84 x 27.8mm (with wall bracket and DB9 port)

External COM port and DI / DO via Ethernet and Internet
built-in web server
3 x Shift relays Expanses Max. 30 VDC 1A
3 x digital contact inputs
1 x RS232 (DB9 Male), RS422 or RS485 (screw terminal)
1 x Ethernet 10 / 100Mbit
Power supply from 9 to 24 VDC

Use VDSL connection over 2-wire cable, where Wifi is an unstable connection

Up to 1.4 km over e.g. old telephone cable with 2 VDSL modules

Use 2 pcs. ETH-VDSL2+4+ or ETH-VDSL2+A and ETH-VDSL2+4+

Ethernet over 2-wire connection with VDSL

Ideal solution when the network distance is over the 100 meter limit

Ideal solution when a Wifi link is an unstable connection

Provides a transparent data connection

Supply: 5VDC, 2A power supply included

DIP switch: VDSL connection, one must be set to CPE and the other to CO.

Prepared for DIN mounting, wall mounting. DIN brackets are available separately.

SOLD INDIVIDUALLY! Order 2 pieces for a set.

Dimensions: 155 x 86 x 26 mm

Use 2 pcs. Eth-VDSL2 + for an Ethernet connection (Bridge)

up to 1.4 km Ethernet connection with 2 pcs. VDSL devices
Poe over 2-wire connection
1 x LAN 10/100 / 1000Base-T RJ45 Auto-MDI / MDI-X Port
1 x VDSL2 RJ11 She
Splitter for analogously Telephone connection included
Power supply: 54V / 0.74A included
POE + (30W) for eg. Access Point, IP camera.
Prepared for your mounting, wall mounting
Your fittings are purchased

PoE power supply via Ethernet cable, up to 30 watts

LAN without PoE input, provides LAN with PoE

For 10/100/1000Mbit network.

Power supply from 100 - 240VAC / 0.6A

4 port Gigabit network card
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
PCI express 2.1 x 4
4 x RJ45
For normal and low profile

Elegant solution for connecting Single Mode to Multi Mode fiber networks

1000Base-SX to 1000Base-LX, SM, 850/1310 nm

Only for Gigabit fiber networks

Power supply included

Connect Multimode fiber network with single mode fiber network
1 x 100Mbit Single Mode SC
1 x 100Mbit Multimode SC
Wavelength: 1310 / 1310nm
100Base-SX / LX fiber network
5VDC / 2A adapter included

Multimode version, 850 nm
connector: DB15 Han to Ethernet, ST connector for 10Base-FL
Option Purchase: Aui cable for DB15
Fiber: 62.5 / 125um Multi mode Duplex to 10Base-FL
Max. Length of DB15 Cable of 50m
2 km Max at Multi Mode Cable
0 to 55 degrees (Standard operation)
10 to 90% (non-condensing)
IEEE 10Base-5 / FL Ethernet
sqe on / off

REMAINDER SALE

4 x 10/100Mbit RJ45 Managed switch with PoE+
2 x 10/100Mbit RJ45 redundant uplink ports
DC 48V Power Input (power supply not included)
Up to 25 Watts per port
Max. 80 Watt total power
Multiple Super Ring technology (MSRTM), 5ms recovery time
Dual Homing (RDHTM)
IGMP snooping multicast
Built-in hardware watchdog timer for system auto-reset
-40~60°C operating temperature

Unmanaged 5 ports industriswitch
4 x RJ45 10/100Mbit
1 x ST fiber 100Mbit Multi Mode
IP50

Unmanaged 5 port Ethernet switch

5 x 10/100/1000Mbit, RJ45

Operating temperature: -40 - +70 °C

12 - 56VDC

Wireless RS232 link between 2 RS232 ports.
Only supplied as a set (2 pcs.).
BT Ver 2.0+EDR, Class1
Up to 100 meters with included antennas at line-of-sight
Up to 1km with larger external antennas (additional purchase)
Automatic establishment of connection at power on
With frequency hopping to avoid interference
Baud rate: 1200 - 921.6kbps, 8 data bits, O/E/No, 1/2 stop bit
Setting up Baud rate etc. with DIP switches
RTS/CTS on/off - DTR/DSR/DCD loop-back
Supports multi-connection: 1 master to 4 slaves
Supply voltage: 5 - 12VDC/80mA

300 Mbps Dual Band WiFi Adapter
USB
Built-in Antenna
Supports 2.4 and 5 GHz
Windows XP (32/64-bit), Vista (32/64-bit),
7 (32/64-bit) and 8 (32/64-bit), Mac OS and Linux

Outdoor directional panel antenna, 18 dBi
Vertical spread is 18 degrees
Horizontal spread is 35 degrees
Mast bracket included
N she stick
Dimensions: 290 x 209 x 35mm

Udendørs retningsbestemt YAGI-antenne 7 dBi
Vertikal spredning er 40 grader
Horisontal spredning er 45 grader
Mastebeslag medfølger
N hun stik
300 x 100mm

Outdoor / indoor 2.4GHz omnidirectional antenna 7 dBi
Vertical spread is 18 degrees
Horizontal spread is 360 degrees
With RSMA he plugs into the bottom of the antenna
Height 24cm
Mast mounting with strips

2,4GHz SEKTOR / MIMO WiFi antenne 15 dBi
Vertikal spredning er 28 grader
Horisontal spredning er 120 grader
Højde 41cm
2 x N hun stik
Mastebeslag medfølger

Outdoor directional parabola antenna 19dBi
Vertical spread is 7 degrees
Horizontal spread is 8 degrees
Mast bracket - adjustable - included
N she stick
1070 x 610mm

Udendørs retningsbestemt panelantenne, 8 dBi
Vertikal spredning er 30 grader
Horisontal spredning er 75 grader
Vægbeslag medfølger
N hun stik
107 x 94 x 30mm

Outdoor 2.4GHz directional panel antenna 12 dBi
N she stick
Vertical spread is 28 degrees
Horizontal spread is 65 degrees
Wall bracket included
90 x 215 x 20mm

Remaining stock
Outdoor Panel antenna, MIMO type
2 pcs. 11dBi omni antennas in the same housing
MIMO is the Multi-in, Multi-out principle
Vertical spread is 9 degrees
Horizontal spread is 90 degrees
Designed to minimize phasing of the radio signal
Mast strips included
2 x N female connector

Outdoor Dual Band 5.8 / 2,4GHz Renary Antense
Passive gaint: 6 DBI
Vertical Proliferation is 25 degrees
Horizontal Spread is 360 degrees
n She connector
Length is 54cm
Maste fittings included - with flance

Indoor 2,4GHz Whip antenna 5 DBI
Rubber antenna with Flex-joint
RSMA male connector
Height 20cm

Indoor 2,4GHz Whip antenna 5 DBI
Removable Rubber antenna
RSMA Han connector
Height 25cm
Cable length: 1.5m

Udendørs 2,4GHz rundstråleantenne 15 dBi
Vertikal spredning er 6 grader
Horisontal spredning er 360 grader
N hun stik
Højde 1,6meter
Mastebeslag medfølger

2.4GHz indoor omnidirectional antenna 0 dBi
Antenna for short range applications
1.5 meter cable, RSMA male connector
Robust, suitable for industrial machine
Gasket included - provides a watertight assembly

2.4GHz indoor omnidirectional antenna 0 dBi
Antenna for short-range applications
RSMA male connector for AP - (circumferential + hole)
Robust, suitable for industrial machine

WiFi Booster 200mW, 11/54 for indoor use

2-way WiFi amplifier. NOTE: max. Radiated power may be 100 mW

Tilbehør: 1 stk. justérbart beslag til WLAN-PANEL8 og 12

REMAINING STOCK

54 Mbit access point with PoE, outdoors

Industrielt 2,4/5GHz trådløst Access Point
1200Mbps 802.11ac
Dual Band
LAN Gigabit Ethernet 
1 x 10/100/1000BASE-TX RJ45 port med PoE
2 x 2.4GHz 5dBi SMA antenne, 2 x 5GHz 5dBi SMA antenne med RP-SMA-stik 
802.3at PoE, 48-56V DC input
IP30 tæt kabinet
Driftstemperatur -10 til +60°
Til vægmontering

Beslag til montage af  WiFi antenner

Beslag til montage af WiFi antenner

Vulkaniseringstape/ isoleringsbånd til vandtætte samlinger, 38 mm x 5 meter

Vulkaniseringstape/ isoleringsbånd til vandtætte samlinger, 19 mm x 5 meter

Cable insulation and crimping cable
Cable termination of RJ11, RJ12 and 8 pins RJ45
Cable review tests with LEDs included