Network products / Wifi / PoE / RJ45-Fiber

Transient protection for 10/100 Mbps network

4kV to ground.

2 x RJ45 female

Ground wire is to be connected.

Transient protection for 10/100Mbit networks. 4kV to earth.
Transmits PoE voltage.
2 x RJ45 female.
Ground wire must be connected.

Transient protection for 10/100/1000 Mbit networks

10kV to ground.

2 x RJ45 female.

Ground wire should be connected. 

56K USB modem
1 x USB
1 x RJ11
Plug & Play
Downstream speed 56kbps
Upstream op til 33.6kbps
OS support: Windows XP 32/64, Vista 32/64, Win7 32/64, Win10, Mac OS10

Analogue modem for PCI bus.

Eksternt 56K modem til seriel port.
Vælg mellem RS232 og RS485 
Industritype til DIN skinne
10 - 40 VDC - strømforsyning tilkøbes

Professional injector with light for cable identification.

Attach the light bulb at one end and in the opposite, the light will light.

PoE adapter
DC injector / splitter cable
Supports 5/12/24 / 48V
Range: Up to 40m
Dimensions DC plug: 5.5 / 2.1mm
Length cable : 15cm
Set of 2 pcs. cables - injector and splitter

7 dBi outdoor omni antenna with N-type female plug
800-900/1800-2100MHz
Length is 76cm
N female connector
For mounting on pipe
For wall mounting
Mounting bracket included

Vandal-proof GSM dome antenna for metal roof mounting
850-960 / 1770 - 2100 MHz
with 1.5 meter RG 174 Cable
SMA male (rounder + tap)
ABS plastic - With rubber gaskets
Thread hole Ø12 mm

Monitor, manage and manage industrial devices
2 x SFP slot for fiber transceiver (SM or MM)
Industrial EMC protection, temperature operation wide, -40 ° C ~ 85 ° C
fast- Ethernet 2 x 100/1000 SFP slots with RSTP Redundans
4 software Select RS232 / RS485 / RS422 serial ports, up to 921Kbps
TCP Server / Client, UDP, Virtual com and tunneling modes are supported
Embedded security with PPTP, IPSec or OpenVPN Client / Server
Redundant 12 ~ 48 VDC Power entries
Configuration via Web Browser / Serial Console / Telnet / Windows Utility
Robust metal cabinet with wall or DIN rail mounting

Rest storage

100 Mbit / s Net card for light guide
with ST connectors
PCI 3.3 / 5 V
32bit

Modbus over the Ethernet or Internet
MODBUS server with 1 x RS232 and 1 x 422/485
Can run Device to Device
0/100 Mbps Ethernet port, auto MDI / MDIX, 10/100 auto, 1500V magnetic insulation only on
RS485 RS232 Modbus ASCII / RTU port, 1 RS422 / 485 Modbus ASCII / RTU port, 16V / 400W TVS isolated, RS485 automatic line control
9 ~ 30VDC power input, IP30 enclosure , DIN rail mounting structure, USB port (Modbus serial port expansion and capture of memory)

External COM port via Ethernet and Internet
RS422 / 485 Serial port via screw terminal
Power supplied from POE or 12 - 48VDC
Your mounting

External COM port via Ethernet and Internet
RS232 Serialport via DB9 male
Power supplied from PoE
can be powered from 12 - 48VDC / 1.7 watts
Short Power Jack Pigtail Cable included
Purchase Power supply, not included
1 x RJ45 with PoE input
DIN mount
Operating temperature: -25 - + 75 ° C
Dim: 90 x 52 x 27 mm

External COM port over Ethernet and Internet.
RS232 seriesport via DB9 Han, or
RS422 / 485 port via screw terminal block
Power supplied from 12 - 48VDC. Has redundant DC input.
DIN mounting

Serial device server with RS232 / RS485

RS232 via DB9

RS485 via screw terminal - 2-wire

100Mbit fiber media converter to RJ45, Single Mode
1 x RJ45 10 / 100Mbit | 1 x SC 100Mbit Singlemode
1310nm
up to 35 km

REMAINING STOCK

VDSL2 router with 4 x RJ45 and Wifi

Network connection up to 1.4 km over 2-wire telephone cables

Point to point connection

2 pcs. ETH-VDSL2ROUTER for one connection

REMAINING STOCK

Ethernet over telephone cable 1 x twisted pair cable

VDSL module with 8 port switch and SFP slot

Up to 100Mbps at 300 meters

Up to 1km - automatic speed adjustment

Break the 100 meter limit with a VDSL connection

Transparent data connection

8 port VDSL2 switch with 2 shared RJ45/SFP ports

Purchase ETH-VDSL2ROUTER to create a link

High Speed ​​Ethernet Adapter for USB3.0
RJ45 female and USB 3.0 male (type A)
Full duplex 10/100 / 1000Mbit
Supplied via USB port
OS support WIN2000, XP, VISTA , 7, 8, 10
Black with 10 cm cable

WDN media converter for 1-core fiber, Singlemode SC.
1 x RJ45 10/100 / 1000Base-TX | 1 x 1-core (simples) single mode fiber with SC
Must be used with ETH-RJ45G-WDM SA
Up to 15 km
WDM wavelenght-division-multiplexing - only for simplex fiber cable
Must be WDM converter at both ends of the fiber

10/100 / 1000Base-TX to 1000Base-LX single mode, 15 km
WDM Wavelength Division Multiplexing - Simplex fiber cable only
Must be WDM converter at both ends of the fiber.

Replaced by ETH-RJ45G-SFP2

1000Mbit Media converter can connect 2 different fiber networks and RJ45
Is suitable as a node in Gigabit fiber networks with 1 x RJ45
1 x RJ45 10/100/1000Mbit
2 x 1000Mbit SFP slot for SFP modules Single Mode and/or Multi Mode
Can also connect Single Mode networks with Multi Mode networks
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase additional Gigabit SFP modules.
5VDC power supply included

Media converter for 100/1000Base-X SFP module
Can power equipment with PoE+
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
10/100/1000Base-TX
56VDC PSU included.
Mid-span PoE (PSE) (4.5/7.8)
PoE power is max. 30 Watt
Alarm in case of link failure

10/100/1000Base-TX to 1000Base-LX
1310 nm, Single Mode
Up to 10 km
Uses singlemode fiber cable (9/125 µm)
Only for 1000Mbit fiber, Single Mode

Media converter 1000Mbit Multi Mode SC duplex, 550 meters

10/100/1000Base-TX to 1000Base-SX, 850nm

Multimode fiber cable (50/125 µm or 62.5/125 µm)

Operating temperature 0 to 50°C

DC 5V/2A

Converter 10Base-T to 10Base-2
1 x RJ45 from Hub / Station select swich
1 x BNC to 10 Base-2
100m max. per UTP cable
185m max. Coax
12V DC, 1 Amp
0 to 55 ° C
10 to 90% (Non-Condensing)
IEEE 802.3 10Base-T / 10Base-2
Network: Star - CSMA / CD

AUI converter to UTP cable, external supply
1 x DB15 AUI female 10 Base-5 (AUI)
1 x RJ45 female 10 Base-T
Max. cable length: max. 500 m per (thick Ethernet), max. 100 m per UTP cable
LED: POWER, COL, LINK, TP / RCV
IEEE 802.3 10Base-T / AUI Ethernet
IEEE 802.2 10Base-T/10Base-2
FCC Class A Subpart B or Part15 Requirements

PoE ULTRA Power Supply via Ethernet Cable, 60 Watt
Output Voltage: 50 - 57VDC 1.2Amp
Supporter Mid-span and End-span
Using the 4 x Pair for PoE voltage

IEEE 802.3at / of PoE standard compliant
Compatible with all IEEE 802.3at/af PoE devices
56VDC 50pwatt PoE power
Splits 56V DC power over RJ-45 to 12VDC or 19VDC or 24VDC
External power supply up to 100 meters

Passive PoE Injector with 12 / 19 / 24 VDC 0.7A output
From Active to Passive PoE converter
PoE input port: IEEE 802.3af/at RJ-45 STP / PD. Supplied from an active PoE switch
Passive PoE output port: non-802.3af/at RJ-45 STP / PSE. For equipment that is NOT for active PoE.

LAN without PoE voltage gives LAN with PoE
4 port PoE power supply 30 Watt per port
Connects between non-PoE switch and e.g. IP cameras with PoE
For 10/100/1000Mbit networks
Power supply included
Can be powered with 52-56VDC / 122Watt
Pin 4/5 +, 7/8 - (Mid-span)
Dimensions: 97 x 70 x 26 mm
Temp: -10 - +70°C

24-ports PoE strømforsyning 30 W, 10/100 Mbit

Switches without PoE can with this Injector "upgraded" to PoE switch
24 ports PoE full power supply

Per port DC 52V 30.8/15.4 watts
LAN without PoE in, LAN with PoE out
10 / 100 / 1000Mbit network

Max PoE 440 Watts

Splitter for PoE via Ethernet cable
LAN with PoE in, gives LAN without PoE out
12 VDC 2A or 24 VDC 1A next to other equipment

10/100 / 1000Mbit PoE Network Extender
Extend the network cable with PoE over the magic 100 meters
4 pieces. Extenders provide a maximum distance of 500 meters
Extenders are powered from PoE and pass PoE on to the next Extender
Dimensions: 94 x 70 x 26 mm

PoE In: Max 30.8 Watts

PoE Out: Max 26 Watts
Weight: 189g

2 ports 10 Gbit PCI-Express netkort med SFP+ og CX4

10 Gbit PCI-Express netkort med SFP+

1000 Mbps PCI-Express Net Card for SFP
Buy 1000Mbit SFP Module Single Mode or Multi Mode
Driver For: XP / 2003, Vista / 2008, Win 7, Linux 64-bit, Mac OS X
PCI Express, 1 Lane
SFP module can be 62.5/125my or 50/125my
Operating temperature: 0 - +65°C
Dim: 121.4 x 119.5 mm

Mini PCI-Express Gigabit network card

Media Converter 100Mbit Multimode ST duplex - 2km
1 x RJ45 10 / 100Mbit
1 x ST 100Mbit
1310nm
5VDC
Dimensions: 97 x 69 x 26 mm

10 / 100Base-T to 100Base-FX duplex multi mode
Multi mode up to 2km
SC - 50my and 62,5my - 1310nm
Temperatur: -40 - +75°C 
5VDC PSU included.

Ethernet through the same phase of electric cables - sold as a set (2 pcs.)

Not suitable for industrial use.

Rest storage

2 Ports Repeater to 10 Base2 and 10 Base5 Network
BNC / Aui Ethernet
can convert between Aui and BNC networks.

AUI converter to UTP cable
1 x DB15 male to 10 Base-5 (AUI)
1 x RJ45 jack for 10 Base-T
Max cable length: 100m max per UTP cables
LED: POWER, COL, LINK, TP/RCV
IEEE 802.3 10Base-T/AUI Ethernet
FCC Class A Subpart B of Part15 Requirement
No need for external power supply

Unmanaged 8 ports industry switch & nbsp;
8 x 10/100 / 1000Mbit with RJ45
IP30 -Set metal housing
9 - 48VDC, 4Watt - Redundancy PSU input

Unmanaged 8 ports industriswitch 
8 x 10/100Mbit med RJ45
IP50-tæt - metalkabinet
9 - 48VDC, 3,15Watt - Redundancy PSU input

8 port 10/100/1000Mbit unmanaged switch in mini format.
Powered from PoE or 5VDC (PSU not included).
Additional purchases, if any DC5V/2A-RQ power supply.
Does NOT have PoE out.
Dimensions: 155 x 86 x 26 mm
Weight: 378g

8 Ports Managed Switch With Fast Recovery and Ring
Erps (Ethernet Ring Protection Switching)
8 x RJ45 10/100/1000Mbit Switch
Store and Forward Architecture, Broadcast Storm Checking
1.5mbits SRAM Packet Buffer
Automatic Address Learning and Address Aging
Supply paging: 12 - 48VDC or 24VAC