Root

Mains cable with "device plug"
Male C14 for live equipment (IEC)
Female C13 for voltage receiving equipment (IEC)
250 VAC with ground
Approvals: CE, WEEE
Good quality
Contact the sales department for other lengths

15.6" PanelPC TFT-LCD with 1920x1080 resolution.

300 cd/m² (nits) luminance.

Contrast ratio: 500:1

Resistive Touch (USB)

Intel Celeron J1900 SoC

Option: i3,i5,i7 price reservation (when ordering, contact our sales department)

DDR3L/DDR4 (depends on CPU)

2 x USB port

1 x Gigabit Ethernet.

Robust stainless steel housing

6 pages IP65 rating for industrial environments.

VESA mounting 100/75 mm

Wall mounting bracket included

422 x 272 x 47mm (WxHxD)

Supply voltage: 24VDC

Power supply included

i7 Haswell i7 4578U 3.0GHz, Dual Core, 4 Threads 4MB Cache
2 x SO-DIMM DDR3L, Max. 16GB
TPD 28W
Intel Irus Graphics 5100
2 x Intel Gbit RJ45, Wake on Lan, PXE
6 x RS232/422/485 (2 is BIOS select RS422/485)
8 x USB (4xUSB3.0, 4x USB2.0)
SIM card slot
GPIO
HDMI, VGA (dual display support)
1x MSATA3.0, 1x mini PCIe
-20 ~ +75 Centigrade (requires special RAM)
OS Support: windows 7, 8, Windows 10, Linux
212,5x149,5x52mm
12Vdc

Hot plug support and plug and play

Virtual display to avoid signal loss and screen changes when the display connection is interrupted

Memory function in case of power failure

Maximum resolution: 2560 x 1440@60HZ / 3840 x 2160@60HZ

Steel whip antenna for LTE, GSM
Magnetic foot
Wide Band 2 - 6 GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
SMA he
Dimensions: 150 mm, Ø30 mm foot

10.1" Robust in Vehicle tablet
Qualcomm Cortex-A53, 64-bit Octa-core, 1.8GHz
Android 9.0
2 GB LPDDR3 RAM (4GB can be purchased)
16 GB eMMC (64GB can be purchased)
Bluetooth 4,2 WLAN  IEEE 802.11a/b/g/n/a & 4G LTE, HSPA+
USB Type-C & USB Type-A
2 x RS232
1 x RS485
2 x CANBUS CAN 2.0b
GPIO
RJ45
IP6x & IPx7
Operating temperatures -20°C ~ 65°C (-4℉~149℉)
Power DC8-36V
Dimensions 273×183×49mm
Weight 1,6kg

Break the 100 meter limit with VDSL over RG59 coax cable
1 x RJ45 10/100 Mbit
Up to 94 Mbit/s - duplex (automatic speed optimization)
Transparent (untouched) data connection
128-bit AES encryption
Frequencies: 2 - 28MHz
Same device can be Master or Slave (DIP)
Establishes even the best connection
Dimensions: 97 x 70 x 26 mm
Temperature: 0-50°C
5VDC 2A power supply included
75Ω cable must be used
Use 2 pcs. ETH-VDSL-RG for a point to point connection
Use 1 pc. Master for 4 pcs. Slaves - 1:4

Protocol converter from M-BUS devices to PC/PLC which is Modbus Master
Up to 20 M-BUS units (meters)
RS485 Modbus interface for Modbus master
Free setup software
Supply voltage: 18 - 35VDC, 15 - 21VAC
Max. power consumption: 4 Watt
Baud rate: 1200 - 115,200 baud
Galvanic isolation
Temperature: -40 - +70°C
Dimensions: 71 x 60 x 60 mm

4 ch Network extender over 2-wire, RJ45 or Coax cable
Provides transparent Ethernet connection up to 2000 meters
Range with up to 46Mbps: max. 1200 meters COAX
Range with up to 28Mbps: max. 1000 meters RJ11
Range with up to 73Mbps: max. 699 meters RJ45 UTP
Range depends on cable quality etc.
4 x RJ45 for LAN
1 x RJ45 for Link (RJ11 can also fit in the female connector
1 x BNC Coax 75ohm
DIP switch to select Master or Slave mode
Dimensions: 155 x 86 x 26 mm
Cabinet: Metal
Weight: 347g
Supply voltage: 12VDC/1A
Temperature: 0 - +50°C

Steel whip antenna for Access Point
Magnetic foot
Dual Band 2.5GHz / 5.8GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
RP-SMA male / RSMA male connector
Dimensions: 150 mm, Ø30 mm foot

Duplicate one DVI-DL+ Audio input to multiple DVI-DL+Audio outputs
Support up to 2560 x 1600 resolution
Automatic power-saving when DVI input is lost
EDID Copy function ensures accurate output display
Read and store the EDID from the connecting display to the video extension system
Compatible with most of the popular screen resolution to XGA, SXGA, UXGA, WSXGA ….Full HD, WUXGA system.
Simple LED indicatior makes operation userfriendly
Plug-n-Play system configuration
Alternatively perform the default or the copied EDID for the connected display device
Unique DVI-SL / DVI-DL Switch for accurate EDID configuration

Fanless design (embedded heat pipe cooling solution)

12/13 generation CoreTM i9/i7/i5/i3 processor (Alder Lake-S/Raptor Lake-S)

Up to 60W GPU MXM module expansion

802.3af (15.4W)/802.3at(25.5W) Gigabit PoE ports

DP x2 + HDMI x 1 and DVI x 1 (supports 4 independent displays)

On/off delay control / configurable ignition current control

Supports TPM 2.0 and Time-Sensitive Networking (TSN)

Two mPCIe for optional WiFi/3G/4G/GPS or I/O expansion supported

Front-accessible I/O

1 x M.2 B for storage or 5G/LTE +1 x M.2 E-key for WiFi/BT

1 x M.2 M for NVMe SSD

285x230x 90 mm (9.84" x11.50" x 3.54"), fanless 285x230x110 mm (9.84" x11.50" x 4.33"), w/ FAN

DC 9~36V input

CE, FCC Class A, E-mark

optional extras

RJ45 connector with pass-through
For 23AWG Ethernet cable

Compact 5 port Ethernet switch for 100Mbps
Not Managed
Very economical: max. 2 Watt
Supply voltage: 12 - 48VDC
Can also be powered with 24VDC
With redundant voltage input
Dimensions: 104 x 70 x 30 mm
Weight: 255 grams
IP30, metal housing
DIN bracket

Key for USB-B port lock - green
Lock is inserted with this green special key
Other color key cannot release the lock
Key is USBB-LOCK-GN
1 piece. in bag
Colour: green
Material: plastic

Mounting: Desktop or Wall Mount
Construction: Heavy Duty Cold Rolled Steel
Color: Black (Standard), or special colour on requist
Support Micro ATX M/B (120ATXR) (Max. to 9.6" x 9.6")
Drive Capacity: 2x 5.25" CD-ROM & 2x 3.5" FDD &1x 3.5" HDD
Power Supply (Optional): PS/2 Size Single or Mini Redundant ATX P/S (Rear Installation) Max. Depth 190mm
Cooling: 1x (120mm = 90.0CFM ea.) Fan
Front Door: Single Door With 2 Thumbscrews
Air Filter: Inside Front Danel (Washable)
Connector Port (Front): 2x USB Ports (on special request)
Thermal Management Card
Indicators: LEDs for Power ON/OFF, HDD Active, Fan, Temperature
Flexible Hold Down Bar Designed
Switch: Power ON/OFF, System Reset, Buzzer Reset
Dimensions (W x H x D): 400 x 177 x 420mm (15.7" x 7.0" x 16.5")
GW: 15.0 kgs / 33.1lbs
Humidity:55% - 95% Non-condensing
Power supply,DVD, Floppy is not included.

Function LTE-based WAN expansion for various IP networks

Applications Enterprise, surveillance, WiFi hotspots

Dual SIM For ISP fail-over

Web-UI Basic settings, CLI and Command Script for advanced settings

Ethernet Ports 1 configurable WAN & 2x Fast Ethernet

Includes WiFi support

Micro-SD Slot for log storage

Power Input DC 5-18V

Operating Temperature -30°C ~ 70°C

Weight 220g

Dimensions 93x90x27mm

19" TFT-LCD Panel PC
IP65 front
Resolution: 1280*1024
250 nits
5-wire resistive touch screen (capacitive touch on request)
Intel Celeron J4125/J6412 CPU / Core i5 /i7
RAM: 1x SO-DIMM DDR4 (celeron) max 16 GB, i5/i7 2x SO-DIMM DDR4 max 32 GB
1 x M.2 2242/2260/2280 SATA
1 x SATA (2.5'' SATA)
1 x M.2 2280 NVME
MPCIe: M.2 3042/3052 for 3G/4G/5G with built-in SIM slot, M.2 2230 WiFi & BT
2x RJ45 Intel i225V (on special request 2 more can be added)
USB: Celeron version: 4*USB2.0+2*USB3.0 (J4125/J6412), i5/i7 version 4*USB3.0+2*USB2.0
COM: 2x DB RS-232/422/485 port, 4*RS232 in expansion port
GPIO: 1* 10 bit GPIO Inside the expansion port
Power supply: 9-36V DC plug
Working temperature: With air flow -10 ~ 60° C
Anti-vibration with SSD: 3 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1 hour/axis
Anti-shock with SSD: 30 G, IEC 60068-2-27, half sine, 11 ms duration
437.27x361.27x68.8mm
OS Support: Windows 10 / Ubuntu, CentOS

Global 4G LTE Controller, logger and alarm
Supports all LTE frequencies
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital "dry contacts". High on contact
2 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 logs
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm to 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - additional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C

GSM/LTE alarm - 4G - Global version

Supports all LTE frequencies

Configuration via USB (Windows program) or SMS

2 x digital inputs with "dry contact" or "logic level" mode

2 x analog inputs from 0 to 60VDC, 10 bits

2 x relay outputs with NO/NC contacts

1-Wire interface for 4 Teracom temperature and humidity sensors

Input can be navigated with alarm text etc.

SMS alarm - up to 5 numbers

Email alert - up to 5 email recipients, SMTP with TLS support

1 relay can be activated with calls from up to 100 phone numbers

Push mode – XML data is sent via HTTP Post to a remote server. Response from server may contain relay setup.

MQTT 3.1.1 support

Firmware update "over the air"

Supply voltage: 10 - 28VDC, 2Watt - optional PSU

Dimensions: 109 x 65 x 32 mm

Weight: 152g