Root

AC / DC power supply for DIN rail mounting
5VDC, 25W
Max. 5A
Screw Terminal
Adjustable Output Voltage 4.5 V to 6.2 V
Working Temperature: -20 ° C - + 50 ° C

Switch mode type
100 - 240VAC to & nbsp; 5 VDC, 2 A
DC plug: 5.5 / 2.1mm

Switch mode type
100-240 VAC to 5VDC / 4 A
DC plug. 5.5 / 2.5mm

Switch mode type
5VDC 2A mains adapter
DC plug. 3.5/1.35mm

AC / DC power supply for DIN rail mounting for 48VDC, 96W
Max. 2.5A
Screw Terminal
Adjustable Output Voltage 43.2 to 52.8 V
Working Temperature: -20 ° C - + 50 ° C

180 - 550 VAC input for 24-28VDC fine adjustment
120 W voltage supply
DIN rail mounting
Adjustable output 24 to 28VDC
Working temperature -30 - + 70 ° C

Robust power supply, adjustable from 12-15VDC / 10AMB
for DIN mount
input 180-550VAC
output: 12VDC10 A (120W)
Contact output by power error
Screw terminal
Dim: 130 x 125 x 40mm (H x D x B)
operating temperature: -25 ° C - + 70 ° C

Power supply 100 - 240VAC to 12 VDC / 5A, switch mode. 2.5mm / 5.5mm Jack
Power cord included.

Switch mode type
110-240 VAC for & nbsp; 12VDC / 3A
DC connector: 5.5 / 2.1 mm

Net adapter 12V, 1A - Switch mode
Output: 12VDC / 1Amp
230VAC input
Power plug: 5.5 / 2.5 mm
Cable color: + Red, - White

Mains adapter - switch mode type

 110-240 VAC to 12VDC/1.5A 

 DC plug: 5.5/2.1 mm 

1 meter cable

19" Rack power supply with 16 12 volt outlets
Output current per port: 0.5Amp
Total power consumption: 8 Amps (96 Watts)
Fuseless current limiter per port max. 1.1Amp
Built-in PTC as short-circuit protection
120 - 230VAC input
Screw terminals
Dimensions: 437 x 170 x 44 mm
Weight: 2.6kg
Operating temperature: -10 - +45°C

Power Jack male connector 5.5/2.1mm screw terminal block.
Connects loose wires.

18 - 36VDC DC / DC converter to 5VDC
Large DC voltage DC / DC converter
5VDC 2A
Working temperature -25- + 70 ° C

18-36VDC DC / DC converter for 24VDC
Insulated DC / DC converter with large voltage range
DIN mounting

18 - 36VDC DC/DC converter to 24VDC fine-tuning

Isolated DC/DC converter with wide voltage range

24VDC 1.1A output

18 - 36VDC DC / DC converter for 12VDC
Large DC voltage DC / DC converter for 12VDC 800mA (9.6Watt)

18 - 36VDC DC / DC converter for +/- 15VDC
Insulated DC / DC converter with large voltage range
+ 15VDC and -15VDC 300mA

19 - 36VDC - DC / DC Converter for 12VDC, adjustable
Isolated DC / DC converter with large voltage range
working temperature -10 - + 60 ° C

DB9 HAN connector
RS232 with terminal block 1-9 screw terminals
Can be used for RS232/485/422
With plastic protection Open/close
With thumb screws

Gender changer with 2 x DB9 male plugs

Angle adapter for DB9, male plug to female plug, right angled

Angle Adapter 90º
Screw mounting
he to she

DB9 male-female adapter plug with EMC protection

Converter / adapter, DB9 female plug to DB25 male plug

DB9F plint med ben 1-5 ledningen genom

Loopback testare för RS232 med DB9 honkontakt

Konverterar från mini DB50 hona till mini DB68 hane. SCSI-II till Wide SCSI

Adapter med 2 x DB37 kontakt

Adapter med 2 x DB37 honkontakt

Gender changer with 2 x DB25 connector

Konverterar från DB25 hane till Centronics 36 honkontakt

Gender changer - DB25 female/female

Converter from DB25 female connector to Centronics 36 female connector

VGA female connector with 16 pin screw terminal block

PCI 10 kanal 16-bitars räkna kort

Tryck cellrad m / M20 x 1,5 gänga; Full belastning = 1000 kg

Aktiv kylare för Socket 775, koppar, 890 g., Horisontell avgas

Socket 2011 Koppar Core, Horisontell avgas

Aktiv køler til Socket 2011, Kobberkerne

Aktiv køler til socket 2011, Kobber, Vandret udblæsning

Active cooler for socket 1366, Aluminum, Horizontal exhaust

Active cooler for socket 1366, Copper, vertical exhaust

Active cooler for Socket 1366, Aluminum

Aktiv kylare för Socket 479, 2U.

Aktiv kylare för Socket 479, koppar, 1U, horisontell avgas

Aktiv kylare för Socket 478, koppar, 2U, horisontella avgassystem, 46 dB

Slavbas, koppar, socket 479

3 SATA RAID-kontroller med 2 x SATA och 1 x IDE

Supports PCI Express Specification Revision 2.0. (Compatible with PCI Express 1.0)

Extends two Serial ATA Gen3 6Gb/s ports. (Compatible with SATA Gen1 and 2)

Native Command Queue (NCQ) on SATA port.

Supports up to two storage devices connection with RAID 0 and 1.

Hardware RAID design reduces the system resource loading.

Built-in 2 standard SATA ports connectivity.

Works with various brands of large capacity SATA hard disk drives.

Low-profile design fitting for kinds of computer chassis (Optional).

Certified by CE, FCC, VCCI, BSMI, and RoHS.

Support Windows 2000/XP/2003/Vista/7/8/8.1 (32/64-bit) ,Linux 2.6x, and DOS

EOL product last in stock

Supports 1-Lane 2.5Gbps PCI Express bus Spec. Revision 1.1.

Supports one Parallel-ATA (IDE) channel to expand two ATA/ATAPI storage devices.

Compliance with power management specification v1.1 and ACPI v2.0.

Supports system booting from add-on card function.

Low-profile design fitting for kinds of computer chassis (Optional).

Certified by CE, FCC, VCCI, BSMI, and RoHS.

Support Microsoft Windows, Linux, and DOS operation system.

Microsoft Windows 2000, XP, 2003, and Vista 32/64 system, Linux 2.6.x.

EOL product! LAst in stock.

Optiskt isolerad RS232-adapter, max. 115,2 kbps, automatisk flödeskontroll, DB9-kontakt

RS232 galvanic isolator, 2500VAC

Transmits Tx, Rx, RTS and CTS

Up to 115 kbit/s

Input: DB9 female, output: DB9 male

RX, TX, ON indicator

12VDC / 100mA (-12V, +gnd)

Power supply included (3.5/1.3mm)

transfer mode RS422 - full duplex
max.transfer rate 115 kb/s
max. line length 1 200 m
transfered signals RxD, TxD
selectable terminator 120R
connector RS232 D - SUB 9 pin F
connector RS422 D - SUB 9 pin M
galvanic indication (LED) red PWR, yellow RxD, green TxD
power supply 12V + -10%
input supply max. 1W
dimension 63 x 17 x 34 mm

RS232 for RS485 converter
Opto-insulated
Galvanic isolation between DC input and RS232 port
Supply voltage: 9 - 50VDC, 10 - 34VAC
Automatic flow control
Up to 1.2km Built-in Termination Resistance - Can be Disconnected
Screw Terminals

Kapsling för 2,5 "HDD 3.5" HDD w / SATA-anslutning

Output voltage selects with special & nbsp; jumpers
Universal power supply for notebooks
input 12 - 24VDC 90W

Switch mode converter from 12-15 VDC
For 3VDC / 5VDC / 6VDC / 7.5VDC / 9VDC or 12 VDC
Max. 2 Amp
4 DC Jack connector included

110VAC to/from 230VAC universal transformer
Connect 110VAC equipment to 230VAC mains voltage
Connect 230VAC equipment to 110VAC mains voltage
Cable with EU male plug and US male plug can be purchased separately - may NOT be used outside the LAB environment!!
The cable has 2 male plugs and is therefore very dangerous in unskilled hands !!!
No galvanic isolation between primary and secondary

VGA to HDMI 4K Scaler converter
Push buttons for selecting resolution
1 x VGA input
1 x Aux audio input
1 x Mini USB input
1 x HDMI output
Operating temperature: 0°C ~ 40°C
Dimensions: 93 x 84 x 28 mm
Weight 160g

Adds eight high-speed RS-232/422/485 serial ports via USB connection
2k bytes transmitter and receiver
Requires no IRQ, DMA, I/O port
RS-232 max bit rates of up to 1 Mbps
RS-422/485 maximum bit rates of up to 10 Mbps
Automatic transmission buffer control for 2-wire RS-485 half-duplex operation
Biasing and terminating resistors installed on board
Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Supported RS-422 signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 2-wire signals: Data-, Data+, GND
Data Bits: 7/8
Parity: None, Even, Odd, Mark, Space
Stop Bit: 1, 2
Flow Control: Hardware (RTS, CTS), XON/XOFF
Monitor LEDs for TxD, RxD indicating port status
Built-in AC to DC switching power supply, 100VAC to 240VAC
Virtual COM port drivers available for Windows 11, 10, 8.1, 8, 7, Vista, 2003, XP, 2000
Win Server: 2000 up to 2018, Linux, MAC
Industrial quality metal case with DIN bracket for DIN rail mounting

Få 4 stk. RS232 porte på PC via USB porten

Forbind 4 x RS232 enheder til USB port
Metal kabinet og med vægmontering
Baudrate op til 115,2 kbit/s
Supporterer ikke hardware licens nøgler

Supporting Win10

Two 16550 High performance UART (RS232) serial channels
Occupies one PCI or PCIe bus slot
Low Profile PCI Form Factor
Includes Low Profile PCI & Regular size PCI two brackets
Both USB A type and USB pin header connector on board to host connection
One RS232 DB9M and one RS232 10pin RJ45 serial ports on board
Includes one 10pin RJ45 – DB9M Bridge cable for 2nd DB9M port
5VDC Power output from each DB9M Port for POS device use application
2 Jumpers Individually enable / disable 5VDC output for each DM9M Port
On Board Molex mini 4Pin Power connector for sufficient DB9M 5V bus power from PC power supply
Supports 32bit/64bit Windows 7, Vista, XP, 2000, ME, 98SE

Get 2 pcs. COM ports on PC via the USB port

Separate USB cable AM and BM

Supports Win7/8/10/11

Cable included

Tilslut ældre typer tastaturer til pc’er, der kun har USB

Connect RS232/RS422/RS485 equipment to USB port
Baudrate up to 921,6 kbit/s
Select type of port by DIL switch
Supports Win7/8/10, MAC

RS-232 serial port by connecting to a USB port

Provides DC5V/250mA to external devices - Pin 9

Compact converter

Cable length of 100 cm

Power from host USB port

LEDs indicate TxD and RxD activity

Installs as a standard Windows COM port

Full RS-232 modem control signals and hardware/software flow control

Serial port protected with 15KV ESD protection

Non-standard baud rates supported

Easy plug and play installation and RS-232 device connection

High-speed serial port with baud rate up to 921.6 kbps

Supports Windows 11, 10, 8.1, 8, 7, XP, Windows Server 2025, 2022, 2019, 2016, 2012 R2, 2012 and 2008 R2

Supports Linux Kernel version 3.0 and later

Supports Apple-provided VCP on OS X 10.9 and later

Data bit - 7/8

Stop bit - 1, 2

FTDI chip - FT232xx.

Get 1 piece. x RS485 or RS422 port via adapter connected to PC's USB port
Galvanic isolation (optical), 2KVolt
Baudrate up to & nbsp; 921.6 Kbit / s
Windows Win 7/8, Vista, Linux & Server 2000 to Server 2016 (WHQL certified)
Linux Kernel 2.4
Mac OS X 10.9, Driver Approved by Apple

CAN bus port on your computer via USB 1.1, 2.0 or 3.0 port
Powered from USB port
LED shows initialization and CAN bus status
Installs as a standard Windows COM port
CAN modes: Standard, Listen, Echo
Controlled using ASCII commands
API provided along with examples
Plug and play installation
CAN bus speed up to 1 Mbps
Supports CAN 2.0A and CAN 2.0B protocols
Drivers provided for Windows and Linux OS
Supports SocketCAN (slcan driver) since kernel 2.6.38+

Bi-directional converter for SATA and IDE.
SATA for 3½ "IDE HDD / SSD
3½" IDE for SATA HDD / SSD

Digital sound via Toslink optical fiber is converted to analogue sound - 3.5mm Jack
Digital sound via Coax cable is converted to analogue sound - 3.5mm Jack
Connect amplifier or headphones to the converter box.
With volume control
Supports SPDIF - 24 bit data
Power supply included 5VDC/1A
Manual switch between Toslink and Coax input

Digital ljud konverter til 2 x analog phono stik

REMAINDER SALE

MiniGBIC / SFP optical transceiver
LC
1310 nm
Up to 50 km single mode

MiniGBIC / SFP+
LC
1310 nm
up to 10 km, single-mode

MiniGBIC / SFP+
10 Gigabit
LC
850 nm
Up to 300 m multimode

Mini GBIC / SFP optical transceiver
LC fiber cables
1310 nm
up to 2 km multimode

Compactflash-kort på SATA-port, till 3 ½ "front mount

Compactflash-kort på SATA-port, med underlagsplattoma

Compactflash-kort på SATA-port, skrivare adapter

Connect RS232 equipment directly to the PS/2 port on the PC.
Converts ASCII characters to HID commands - can be used for data collection.

omvandlare

Adapter print with 2 x 40 and 2 x 44 pin IDE jacks. Connect 2½ "HDD to 3½" cable and visa versa. Power cable for 2½ "w / Molex.

PCIE to PCI converter

PCIE to mini PCIE converter w/SIM card socket

PCI to PCI express converter

Parallel til seriel omformer
Hastighed: 300 -19.200 bit/s
Handshake: XON / XOFF
Forsyning: Strømforsyning medfølger, 9 VAC, 400 mA
CNV-PAR232 er ikke bi-direktionel og kan derfor ikke sende meldinger fra printer til pc om evt. blækstatus, ”end of paper” m.m.

Mini-PCI Type III til PCI Adapter kort/ konverter
1 x Mini-PCI Type III slot
Til 5V eller 3.3V PCI/PCI-X slots
Monteringsbeslag passer til alle standard kabinetter

SATA power adapter. SATA PSU for drives with MOLEX power connectors

Converter connector from a MOLEX (5¼”) power supply to a 6-pin connector. on the PCIE card.

Fra Mini DVI-D (kilden) til HDMI omsætter
Understøtter ikke lyd
Opløsning op til 1920 x 1200
10 cm kabel mellem DVI-D og HDMI stik
Mini DVI-D han og HDMI hun

Mini DVI-D to DVI-D transducer
16 cm cable between MDVI and DVI
Cable contributes to less physical loading of connectors

Support 5V SATA III, SATA II and SATA I Drive and SSD
SATA II 3Gbps Controller Mini Vertical Adapter Card
44 Pin 2.0 mm IDE male connector for 5V DC and ATA signals
PCBA and SATA drives powered by Pin 41 & 42 of IDE connector 5V input
Compliant with Serial ATA 2.6
Jumper setting supports IDE Master, Slave and cable selection modes

CompactFlash card interface for PC IDE bus
Suitable for PCs where the CF card is a disk drive

IEEE1394b bilingual FireWire800 cable, supports FireWire400

IEEE1394b tvåspråkig FireWire800 kabel, understøtter FireWire400

From 1 DisplayPort to 4 HDMI monitors
Horizontal Wide image distributed on 4 SIDE-BY-SIDE monitors
Input: up to 3840 x 2400 dots
Output: up to 1920 x 1200 for each monitor
Power supply included 5VDC / 2A

Compact Flash til 2,5 "hårddisk kabinet