37-polet terminalkort med 16 stk. BNC og 37 banan 4mm stik
37-polet terminalkort
16 stk. BNC 3
37 banan 4mm stik
Isoleret DC Current Input/Output Modul
0-20mA transmitter til spænding
Isolation 1000 VDC
Udvidet drifttemperatur (-25 ~ +75°C)
Til DINskinne montering
Input og output-stik på den modsatte side
Specifications
Analog Input
Input Channels 1
Input Type (Unipolar) 0~20mA, 4~20mA
Input impedance 250Ω
Input bandwidth 1KHz
Analog Output
Channels 1
Voltage Output (Unipolar) 0~5V,0~10V
Voltage Output impedance <50Ω(10mA max)
Current Output(Source) 0 ~ 20mA, 4 ~ 20mA
Current load resistor 0~500Ω(Source)
Other specifications
Three-way isolation 1000Vdc
Accuracy ±0.1% of full range
Response time <10ms
Weight 95.5 gram
LED Display
1 LED as Power/ Communication indicator
Power
Input +10 to +30 Vdc
Power Consumption 1.61W(Voltage Output) ,2.10W(Current Output)
Environment
Operating temperature -25°C to 75 °C
Storage temperature -30°C to 75 °C
Humidity 5 to 95%, non-condensing
37-polet terminalkort
16 stk. BNC 3
37 banan 4mm stik
Måling og kontrol via USB porten
16 x analoge indgange 12 bit, +/-5V
Sample-hastighed: 10Hz per kanal
1 analog udgang 12bit, +/-5V
4 digitale udgange TTL(CMOS
4 digitale indgange TTL/CMOS
Strømforsynes fra USB porten
DAQ software: Tilkøb NextView
MOXA ioLogik E2210
Ethernet Micro RTU Controller
1 x 10/100 Mbps, RJ45
1.5 KV magnetic isolation
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, CGI, SNTP
RS-485-2w Data+, Data-, GND
15 KV ESD
12 x Digital input - source type
Digital output: 0 til GND
Logic 1 open
Wet Contact: Logic 0 0 to 3 VDC
Logic 1 10 to 30 VDC (DI COM to DI)
8 x Open Collector sink type:36 VDC/200 mA
Strømforsyning: 12–36 VDC
4 x Digital indgang og 4 x Relæ udgang
Form A og Form C power-relæ
Source og Sink type af D/I
D/I indgangene er også 16-bit tæller
Konfigurerbar Power-on indstillinger
Konfigurerbar Safe Value indstilling
Dual Watchdog
Temperaturområde: -25 til +75°C
Forsyningsspænding: 10 - 30VDC
DIN-beslag