I-8094H-G
The I-8094H is a 4-axis stepping/pulse-type servo motor control module that can be used on any of the ICP DAS PAC series controllers, and is suitable for general-purpose motion applications.
Underkategorier
The I-8094H is a 4-axis stepping/pulse-type servo motor control module that can be used on any of the ICP DAS PAC series controllers, and is suitable for general-purpose motion applications.
The I-8212W-3GWA/I-8213-3GWA is an industrial Tri-band 3G module with GPS function (only I-8213W-3GWA) that work on frequencies of WCDMA 2100/1900/850 MHz and GSM 850/900/1800/1900 MHz.
The I-8212W-3GWA/I-8213-3GWA is an industrial Tri-band 3G module with GPS function (only I-8213W-3GWA) that work on frequencies of WCDMA 2100/1900/850 MHz and GSM 850/900/1800/1900 MHz.
The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.
The ISaGRAF i-8000 Series (I-8437-80/8837-80, I-8417/8817) is an ISaGRAF PAC and includes ISaGRAF SoftLogic, ISaGRAF is a Windows programming tools and also provides powerful debugging tools including Online Monitor and Control and also Offline Simulation.
The I-8431-80/I-8831-80 are ethernet embedded controller with 4/8 I/O slots. Both are equipped with MiniOS7,an embedded OS similar to DOS that is developed by ICPDAS Co., LTD.
I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.
The ISaGRAF i-8000 Series (I-8437-80/8837-80, I-8417/8817) is an ISaGRAF PAC and includes ISaGRAF SoftLogic, ISaGRAF is a Windows programming tools and also provides powerful debugging tools including Online Monitor and Control and also Offline Simulation.
Matlab/Simulink is very powerful and flexible software for technical computing, which includes modeling, simulating, analyzing dynamic system , etc. Simulink provides a graphical user interface (GUI) for building models as block diagram by click-and-drag mouse operation.
The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.
The ISaGRAF i-8000 Series (I-8437-80/8837-80, I-8417/8817) is an ISaGRAF PAC and includes ISaGRAF SoftLogic, ISaGRAF is a Windows programming tools and also provides powerful debugging tools including Online Monitor and Control and also Offline Simulation.
The I-8430 and I-8830 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.
The I-8431/ I-8831 are ethernet embedded controller with 4/8 I/O slots. Both are equipped with MiniOS7,an embedded OS similar to DOS that is developed by ICPDAS Co., LTD.
The I-8431-80/I-8831-80 are ethernet embedded controller with 4/8 I/O slots. Both are equipped with MiniOS7,an embedded OS similar to DOS that is developed by ICPDAS Co., LTD.
I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..
I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..
The ISaGRAF i-8000 Series (I-8437-80/8837-80, I-8417/8817) is an ISaGRAF PAC and includes ISaGRAF SoftLogic, ISaGRAF is a Windows programming tools and also provides powerful debugging tools including Online Monitor and Control and also Offline Simulation.
Matlab/Simulink is very powerful and flexible software for technical computing, which includes modeling, simulating, analyzing dynamic system , etc. Simulink provides a graphical user interface (GUI) for building models as block diagram by click-and-drag mouse operation.
The I-8KE4 and I-8KE8 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.
I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..
The I-8KE4 and I-8KE8 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.
I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..
AT-bus
500 VDC-fotoisoleringsbeskyttelse - Indgangskanal med 1 kanals spændvidde
Indbygget 1 KB FIFO
Spænding til vejecelle: 12 V, 50 mA
Maksimal forstærkning Op til 40.000
Programmerbar 12-bit opløsning, DC-offset-spænding (0 ~ 5 V)
Andet ordre med lavpasfilterindbygning
Direkte forbindelse til spændvidde type loadcell
8-kanals 12 ~ 24 V isoleret digital indgang
7-kanals isoleret åben kollektor digital udgang
Programmerbar 8-bit LED-indikator.
Command-sæt programmering
The iPAC-8000 is the compact size PAC(Programmable Automation Controller). It supports a variety of connectivity options including Dual 10/100 Base-TX Ethernet ports, one RS-232/485 port, one RS-485 port and two RS-232 ports, and 4/8 slots for high performance Parallel I/O modules (high profile I-8K series) and Serial I/O modules (high profile I-87K series), etc.
iP-8000-MRTU series is a Modbus serial I/O expansion unit to expand I-8K and I-87K series I/O modules over the serial port for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.
The ISaGRAF iPAC-8000 Series (iP-8417/8817/8447/8847) is the ISaGRAF SoftLogic PAC from ICP DAS.
The iPAC-8000 is the compact size PAC(Programmable Automation Controller). It supports a variety of connectivity options including Dual 10/100 Base-TX Ethernet ports, one RS-232/485 port, one RS-485 port and two RS-232 ports, and 4/8 slots for high performance Parallel I/O modules (high profile I-8K series) and Serial I/O modules (high profile I-87K series), etc.
The iPAC-8000 is the compact size PAC(Programmable Automation Controller). It supports a variety of connectivity options including Dual 10/100 Base-TX Ethernet ports, one RS-232/485 port, one RS-485 port and two RS-232 ports, and 4/8 slots for high performance Parallel I/O modules (high profile I-8K series) and Serial I/O modules (high profile I-87K series), etc.
iP-8000-MTCP series is a Modbus TCP I/O expansion unit to expand I-8K and I-87K series I/O modules over the Ethernet for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.
The ISaGRAF iPAC-8000 Series (iP-8417/8817/8447/8847) is the ISaGRAF SoftLogic PAC from ICP DAS.
The iPAC-8000 is the compact size PAC(Programmable Automation Controller). It supports a variety of connectivity options including Dual 10/100 Base-TX Ethernet ports, one RS-232/485 port, one RS-485 port and two RS-232 ports, and 4/8 slots for high performance Parallel I/O modules (high profile I-8K series) and Serial I/O modules (high profile I-87K series), etc.
iP-8000-MRTU series is a Modbus serial I/O expansion unit to expand I-8K and I-87K series I/O modules over the serial port for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.
he ISaGRAF iPAC-8000 Series (iP-8417/8817/8447/8847) is the ISaGRAF SoftLogic PAC from ICP DAS.
The iPAC-8000 is the compact size PAC(Programmable Automation Controller). It supports a variety of connectivity options including Dual 10/100 Base-TX Ethernet ports, one RS-232/485 port, one RS-485 port and two RS-232 ports, and 4/8 slots for high performance Parallel I/O modules (high profile I-8K series) and Serial I/O modules (high profile I-87K series), etc.
The iPAC-8000 is the compact size PAC(Programmable Automation Controller). It supports a variety of connectivity options including Dual 10/100 Base-TX Ethernet ports, one RS-232/485 port, one RS-485 port and two RS-232 ports, and 4/8 slots for high performance Parallel I/O modules (high profile I-8K series) and Serial I/O modules (high profile I-87K series), etc.
iP-8000-MTCP series is a Modbus TCP I/O expansion unit to expand I-8K and I-87K series I/O modules over the Ethernet for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules.
The ISaGRAF iPAC-8000 Series (iP-8417/8817/8447/8847) is the ISaGRAF SoftLogic PAC from ICP DAS.
The iPPC-6631-WES7 and iPPC-x731-WES7 series are WES7 based Panel PC that combine computing, I/O, and operator interface into a single unit, and provide the perfect solution for integrating HMI, data acquisition and control in an individual PAC.
The iPPC-6631-WES7 and iPPC-x731-WES7 series are WES7 based Panel PC that combine computing, I/O, and operator interface into a single unit, and provide the perfect solution for integrating HMI, data acquisition and control in an individual PAC.
The IWS PAC series is the new generation WinCE 7.0 based InduSoft PAC of ICP DAS. It combines a RISC-based CPU board, TFT LCD touch screen to create a ruggedized, flat panel computer perfect for a variety of control and HMI applications.
The IWS PAC series is the new generation WinCE 7.0 based InduSoft PAC of ICP DAS. It combines a RISC-based CPU board, TFT LCD touch screen to create a ruggedized, flat panel computer perfect for a variety of control and HMI applications.
LP-51xx familien er designet med PXA270 CPU (520 MHz) og køre en Linux kerne 2.6.19 OS.
Tilslutningsmuligheder: VGA(800x600), 2xUSB, Ethernet, RS-232/485 og audio porte. Optionelt I/O udvidelses kort til implementering af forskellige I/O funktioner, som DI, DO, A/D, D/A, Timer/Counter, UART, flash hukommelse, eller batteri backup SRAM.
LP-51xx familien er designet med PXA270 CPU (520 MHz) og køre en Linux kerne 2.6.19 OS.
Tilslutningsmuligheder: VGA(800x600), 2xUSB, Ethernet, RS-232/485 og audio porte. Optionelt I/O udvidelses kort til implementering af forskellige I/O funktioner, som DI, DO, A/D, D/A, Timer/Counter, UART, flash hukommelse, eller batteri backup SRAM.
LP-51xx familien er designet med PXA270 CPU (520 MHz) og køre en Linux kerne 2.6.19 OS.
Tilslutningsmuligheder: VGA(800x600), 1xUSB, 2xEthernet, RS-232/485 og audio porte. Optionelt I/O udvidelses kort til implementering af forskellige I/O funktioner, som DI, DO, A/D, D/A, Timer/Counter, UART, flash hukommelse, eller batteri backup SRAM.
LP-51xx familien er designet med PXA270 CPU (520 MHz) og køre en Linux kerne 2.6.19 OS.
Tilslutningsmuligheder: VGA(800x600), 1xUSB, 2xEthernet, RS-232/485 og audio porte. Optionelt I/O udvidelses kort til implementering af forskellige I/O funktioner, som DI, DO, A/D, D/A, Timer/Counter, UART, flash hukommelse, eller batteri backup SRAM.
LP-5231 familien er udstyret med AM3352 CPU (720 MHz) og anvender Linux operativ system(Linux Kernel 3.2.14).
Linux Kernel 3.2.14 er et real-tids OS designet til tidskritiske applicationer med høj ydeevne.
LP-5231 sikrer et kontrolsystem med høj driftssikkerhed, en lille kerne størrelse, optioner som udvidelse med et I/O expansion board.
LP-5231 supportere Web services (Web/SFTP/SSH server).
LinPAC-8081/8381/8781 er anden generation Linux baserede PAC fra ICP DAS.
Familien er designet med LX 800 CPU (500 MHz) der anvender Linux kerne 2.6.33 OS.
Tilslutningsmuligheder: (VGA(1024x768), 2xUSB, 2xEthernet, RS-232/485) og 0/3/7 slots for parallelle I/O moduler (høj profil I-8K) og serielle I/O moduler med (høj profil I-87K).
LinPAC-8000 er den nye generation Linux baserede PAC fra ICP DAS.
LinPAC-8000 er designet med PXA270 CPU (520 MHz) og anvender Linux kerne 2.6 OS.
Tilslutningsmuligheder: (VGA(1024x768), 2xUSB, Ethernet and RS-232/485) og 1/4/8 parallelle I/O moduler med høj profil I-8K og serielle I/O moduler med høj profil I-87K.
LinPAC-8000 er den nye generation Linux baserede PAC fra ICP DAS.
LinPAC-8000 er designet med PXA270 CPU (520 MHz) og anvender Linux kerne 2.6 OS.
Tilslutningsmuligheder: (VGA(800x600), USB, Ethernet and RS-232/485) og 1/4/8 parallelle I/O moduler med høj profil I-8K og serielle I/O moduler med høj profil I-87K.
LP-8x81-Atom familien er den nye generation af Linux baserede PAC af LP-8x81.
LP-8x81-Atom er designet med Intel Atom Z520 Serien 1.33GHz CPU.
Hvor LP-8x81 er designet med LX-800 500 MHz CPU.
Tilslutningsmuligheder: (VGA(1024x768), 4xUSB, 2xEthernet, RS-232/485) med 1/3/7 I/O slots for parallelle I/O moduler (høj profil I-8K) og serielle I/O moduler (høj profil I-87K).
LinPAC-8081/8381/8781 er anden generation Linux baserede PAC fra ICP DAS.
Familien er designet med LX 800 CPU (500 MHz) der anvender Linux kerne 2.6.33 OS.
Tilslutningsmuligheder: (VGA(1024x768), 2xUSB, 2xEthernet, RS-232/485) og 0/3/7 slots for parallelle I/O moduler (høj profil I-8K) og serielle I/O moduler med (høj profil I-87K).
LP-8x81-Atom familien er den nye generation af Linux baserede PAC af LP-8x81.
LP-8x81-Atom er designet med Intel Atom Z520 Serien 1.33GHz CPU.
Hvor LP-8x81 er designet med LX-800 500 MHz CPU.
Tilslutningsmuligheder: (VGA(1024x768), 4xUSB, 2xEthernet, RS-232/485) med 1/3/7 I/O slots for parallelle I/O moduler (høj profil I-8K) og serielle I/O moduler (høj profil I-87K).
LinPAC-8000 er den nye generation Linux baserede PAC fra ICP DAS.
LinPAC-8000 er designet med PXA270 CPU (520 MHz) og anvender Linux kerne 2.6 OS.
Tilslutningsmuligheder: (VGA(1024x768), 2xUSB, Ethernet and RS-232/485) og 1/4/8 parallelle I/O moduler med høj profil I-8K og serielle I/O moduler med høj profil I-87K.
LinPAC-8000 er den nye generation Linux baserede PAC fra ICP DAS.
LinPAC-8000 er designet med PXA270 CPU (520 MHz) og anvender Linux kerne 2.6 OS.
Tilslutningsmuligheder: (VGA(800x600), USB, Ethernet and RS-232/485) og 1/4/8 parallelle I/O moduler med høj profil I-8K og serielle I/O moduler med høj profil I-87K.
LinPAC-8081/8381/8781 er anden generation Linux baserede PAC fra ICP DAS.
Familien er designet med LX 800 CPU (500 MHz) der anvender Linux kerne 2.6.33 OS.
Tilslutningsmuligheder: (VGA(1024x768), 2xUSB, 2xEthernet, RS-232/485) og 0/3/7 slots for parallelle I/O moduler (høj profil I-8K) og serielle I/O moduler med (høj profil I-87K).
LP-8x81-Atom familien er den nye generation af Linux baserede PAC af LP-8x81.
LP-8x81-Atom er designet med Intel Atom Z520 Serien 1.33GHz CPU.
Hvor LP-8x81 er designet med LX-800 500 MHz CPU.
Tilslutningsmuligheder: (VGA(1024x768), 4xUSB, 2xEthernet, RS-232/485) med 1/3/7 I/O slots for parallelle I/O moduler (høj profil I-8K) og serielle I/O moduler (høj profil I-87K).
LinPAC-8000 er den nye generation Linux baserede PAC fra ICP DAS.
LinPAC-8000 er designet med PXA270 CPU (520 MHz) og anvender Linux kerne 2.6 OS.
Tilslutningsmuligheder: (VGA(1024x768), 2xUSB, Ethernet and RS-232/485) og 1/4/8 parallelle I/O moduler med høj profil I-8K og serielle I/O moduler med høj profil I-87K.
LinPAC-8000 er den nye generation Linux baserede PAC fra ICP DAS.
LinPAC-8000 er designet med PXA270 CPU (520 MHz) og anvender Linux kerne 2.6 OS.
Tilslutningsmuligheder: (VGA(800x600), USB, Ethernet and RS-232/485) og 1/4/8 parallelle I/O moduler med høj profil I-8K og serielle I/O moduler med høj profil I-87K.
I/M-7005 modulet benyttes til temperaturmåling med en bred vifte af termistorer. Bruger defineret termistorer kan tilføjes ved at specificere Steinhart koefficienten. Hver af de 8-kanaler kan individuelt konfigureres til forskellige typer af termistorer. De 6 DO kan bruges som alarm udgange. 3000 VDC isolationsbeskyttelse mellem logik og omgivelser samt 120VDC OVP på alle termistor-indgange.
I/M-7011 er et 1-kanals input modul der kan måle strøm, spænding og direkte tilsluttes en termokobler. I/M-7011 ADC har en opløsning på 16-bit. 7011 har åben termokobler detektering. Digital Input porten kan anvendes som 50Hz event tæller. De 2 Digital Output porte kan anvendes til høj/lav alarmering. 3kV isolation fra omgivelser til logik. M-7011 supportere både Modbus RTU og DCON protokoller.
I/M-7011 er et 1-kanals input modul der kan måle strøm, spænding og direkte tilsluttes en termokobler. I/M-7011 ADC har en opløsning på 16-bit. 7011 har åben termokobler detektering. Digital Input porten kan anvendes som 50Hz event tæller. De 2 Digital Output porte kan anvendes til høj/lav alarmering. 3kV isolation fra omgivelser til logik. M-7011 supportere både Modbus RTU og DCON protokoller.
I/M-7013 er et RTD Input Modul med en opløsning på 16-bit til RTD sensorerne Pt100, Ni120 og Pt1000. I/M-7013 kan måle på 2/3/4-tråds RTD sensorer og har åben kredsløbs detektering. I/M-7013 har 3kVDC isolationsbeskyttelse og kan kompensere for kabelmodstanden der sidder i serie med RTD for 3/4 tråds forbindelser. M-7013P/PD har 1 DI der kan bruges til hændelsestæller og 2 DO til alarmering.
I/M-7013 er et RTD Input Modul med en opløsning på 16-bit til RTD sensorerne Pt100, Ni120 og Pt1000. I/M-7013 kan måle på 2/3/4-tråds RTD sensorer og har åben kredsløbs detektering. I/M-7013 har 3kVDC isolationsbeskyttelse og kan kompensere for kabelmodstanden der sidder i serie med RTD for 3/4 tråds forbindelser. M-7013P/PD har 1 DI der kan bruges til hændelsestæller og 2 DO til alarmering.
I/M-7015 er et 6-kanals RTD Input Modul med en opløsning på 16-bit til RTD sensorerne Pt100, Pt1000, Ni120, Cu50, Cu100 og Cu1000.
I/M-7015 kan måle på 2/3/-tråds RTD sensorer og har åben kredsløbs detektering.
I/M-7015P kan kompensere for kabelmodstanden der sidder i serie med RTD for 3 tråds forbindelser.
I/M-7015 har 3kVDC isolationsbeskyttelse, 120V OVP samt ±4kV ESD og EFT beskyttelse.
I/M-7015 er et 6-kanals RTD Input Modul med en opløsning på 16-bit til RTD sensorerne Pt100, Pt1000, Ni120, Cu50, Cu100 og Cu1000.
I/M-7015 kan måle på 2/3/-tråds RTD sensorer og har åben kredsløbs detektering.
I/M-7015P kan kompensere for kabelmodstanden der sidder i serie med RTD for 3 tråds forbindelser.
I/M-7015 har 3kVDC isolationsbeskyttelse, 120V OVP samt ±4kV ESD og EFT beskyttelse.
I/M-7016 Input Modul har en opløsning på 16-bit til 4 Strain Gauge (SG) sensorer i en fuld Wheatstone målebro. Excitationsspændingen (0V til +10V) til målebroen kan levere op til 40mA med en opløsning på 16-bit. Følsomheden for de 2 SG-kanaler kan individuelt programmeres til følgende måleområder:
±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, og ±2.5 V. I/M-7016 har 1 DI og 4 DO med åben kollektor udg.
I/M-7016 Input Modul har en opløsning på 16-bit til 4 Strain Gauge (SG) sensorer i en fuld Wheatstone målebro. Excitationsspændingen (0V til +10V) til målebroen kan levere op til 40mA med en opløsning på 16-bit. Følsomheden for de 2 SG-kanaler kan individuelt programmeres til følgende måleområder:
±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, og ±2.5 V. I/M-7016 har 1 DI og 4 DO med åben kollektor udg.
I-7017, I-7017F og M-7017 er et analogt input modul til måling af strøm og spænding med 16/12-bit opløsning og en sample rate på 10Hz eller 60Hz. I-7017/F 8 kanaler kan konfigureres med 6 differentielle- og 2 single-ended indgange, eller 8 differentielle indgange. M-7017 har 8 differentielle indgange. Modulerne er 3kVDC isolations- og ±35V overspændingsbeskyttet.
Arbejdstemp. fra -25°C til +75°C.
I-7017C/RC, I-7017FC, M-7017C/RC er analoge input moduler til måling af strøm med 16-bit opløsning og en sample rate på 10Hz eller 60Hz. Modulerne er 3kV isolationsbeskyttet og har åben kredsløbsdetektering for 4 ~ 20 mA input. I-7017C/FC og M-7017C er ±15V overspændingsbeskyttet. M-7017RC og I-7017RC er 4kV ESD og ±200V overspændingsbeskyttet. M-7017C/RC supportere Modbus RTU- og DCONprotokol.
I-7017R/-A5, M-7017R/-A5 er analoge input moduler til måling af strøm og spænding med 16-bit opløsning og en sample rate på 10Hz, 50Hz eller 60Hz. Modulerne er 3kV isolations- og 4kV ESD beskyttet. I/M-7017R er 240Vrms overspændingsbeskyttet. I/M-7017R-A5 er ±200VDC overspændingsbeskyttet. Måleområderne for I/M-7017R-A5 er ±50V eller ±150V. M-7017R-xx supportere Modbus RTU og DCON protokollerne.
I-7017R/-A5, M-7017R/-A5 er analoge input moduler til måling af strøm og spænding med 16-bit opløsning og en sample rate på 10Hz, 50Hz eller 60Hz. Modulerne er 3kV isolations- og 4kV ESD beskyttet. I/M-7017R er 240Vrms overspændingsbeskyttet. I/M-7017R-A5 er ±200VDC overspændingsbeskyttet. Måleområderne for I/M-7017R-A5 er ±50V eller ±150V. M-7017R-xx supportere Modbus RTU og DCON protokollerne.
I-7017C/RC, I-7017FC, M-7017C/RC er analoge input moduler til måling af strøm med 16-bit opløsning og en sample rate på 10Hz eller 60Hz. Modulerne er 3kV isolationsbeskyttet og har åben kredsløbsdetektering for 4 ~ 20 mA input. I-7017C/FC og M-7017C er ±15V overspændingsbeskyttet. M-7017RC og I-7017RC er 4kV ESD og ±200V overspændingsbeskyttet. M-7017C/RC supportere Modbus RTU- og DCONprotokol.