I-8431-80-MTCP
I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.
Her finder du ICPDAS produkter. Har vi ikke produktet på lager, skaffer vi det hjem. Vi sender gerne tilbud, når du har fundet det produkt du ønsker. Nyttig link: Gå til ICPDAS
Underkategorier
Der er 376 varer.
I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.
I-8000E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc..
The I-8KE4 and I-8KE8 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.
The I-8KE4 and I-8KE8 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.
The I-8430 and I-8830 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.
The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.
The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.
Matlab/Simulink is very powerful and flexible software for technical computing, which includes modeling, simulating, analyzing dynamic system , etc. Simulink provides a graphical user interface (GUI) for building models as block diagram by click-and-drag mouse operation.
Matlab/Simulink is very powerful and flexible software for technical computing, which includes modeling, simulating, analyzing dynamic system , etc. Simulink provides a graphical user interface (GUI) for building models as block diagram by click-and-drag mouse operation.
XV111 levere 16 digitale udgangssignaler, hver udgang er isoleret med en optokobler. XV111 udgang er sink-typen, med kortslutningsbeskyttelse og kan konfigureres til under opstart (power-on), at levere en digital udgangsværdi.
Alle digitale udgange er ±4kV ESD beskyttet og er galvanisk isoleret op til 3750VDC.
AT-bus
500 VDC-fotoisoleringsbeskyttelse - Indgangskanal med 1 kanals spændvidde
Indbygget 1 KB FIFO
Spænding til vejecelle: 12 V, 50 mA
Maksimal forstærkning Op til 40.000
Programmerbar 12-bit opløsning, DC-offset-spænding (0 ~ 5 V)
Andet ordre med lavpasfilterindbygning
Direkte forbindelse til spændvidde type loadcell
8-kanals 12 ~ 24 V isoleret digital indgang
7-kanals isoleret åben kollektor digital udgang
Programmerbar 8-bit LED-indikator.
Command-sæt programmering
24 stk.skifterelæ (COM, NC, NO) 250VAC og 24VDC 1Amp
24 lysdioder viser relæstilling
Styres af TTL signal (+5VDC er relæ ON)
Forsynes med +24 VDC eksternt
Stik: IDC50
Mål: 130 x 220 mm (B x D)
DC-DC konverter egnet til industrien
18 - 36VDC DC/DC konverter til 12VDC
Isoleret DC/DC omformer med stort spændingsområde
12VDC 800mA (9,6Watt)
Mål: 113 x 70 x 24 mm
Indbygget webserver
Web HMI
Støtte til MQTT protokollen
2-port Ethernet-switch til Daisy-Chain Topology
Dual Watchdog
Driftstemperatur -25 til + 75 °C
DI: 8 Kanaler
DO: 8 Kanaler
ICP DAS I-7231-D-G-CR
Indbygget webserver
Web-HMI
Modbus TCP og Modbus UDP-protokoller
2 x RJ45 Ethernet - Daisy chain
God kommunikationssikkerhed
Dual Watchdog
Driftstemperaturområde: -25 ~ +75°C
I/O Pair - andet moduls indgang spejles til udgang
8 x Power Relæ - elektromekanisk, COM N.O
Relæskiftetid: on: 10ms, off: 5ms
Relæ kontaktspænding og strøm: 24VDC/250VAC/5A
Elektromekanisk: Undgå induktiv belastning
Forsyningsspænding: 12 - 48VDC