Pico ADC-10 PC dataopsamling
The ADC-10 is a low cost unit that provides your PC with a single analog input. The ADC-10 has 8-bit resolution. As the software is supplied, the ADC-10 makes an ideal data acquisition solution for many applications. The ADC-10 measures 0-5V.
Kan programmeres som en standard PC
RESTSALG
Billedsensor: 2 Megapixel CMOS, 0.2 Lux
Linse: Leveres uden linse, se udvalg og priser nedenfor.
KAM-BOX2MP+ undersøtter manuel og automatisk blænde (auto iris)
Videoopløsning: 1600 x 1200 pixels ved 15 fps
Kompression: H.264 / M-JPEG
Ethernet: 10 / 100 Base-T
Netværksprotokoller: TCP/IP, UDP, DNS, DDNS, DHCP, SMTP, HTTP og PPPOE
Alarm: Bevægelsesføler, sensor alarm eller ved tab af videosignal
SD kort: KAM-BOX2MP+ understøtter optagelse på SD kort.
RS485 tilslutning: Til pan, tilt og zoom-kontrol
Digital I/O: 1 indgang / 1 udgang
Dimensioner: 62 x 68 x 155 mm (H x B x D)
Driftstemperatur: 0 - 50°C
Strømforsyning: 12VDC 1A, strømforsyning medfølger ikke
Brug: DC12V/1.5A-R-Q
Integrated 10/100/1000 transceiver
Auto-Negotiation with Next Page capability
Supports PCI rev.2.3, 32-bit, 33/66MHz
Supports pair swap/polarity/skew correction
Crossover Detection & Auto-Correction
Wake-on-LAN and remote wake-up support
Microsoft® NDIS5 Checksum Offload (IP, TCP, UDP) and largesend offload support
Supports Full Duplex flow control (IEEE 802.3x)
Fully compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports IEEE 802.1P Layer 2 Priority Encoding
Supports IEEE 802.1Q VLAN tagging
Serial EEPROM
3.3/1.8/1.5V signaling, 5V PCI I/O tolerant
0.15µm CMOS process
Transmit/Receive FIFO (8K/64K) support
Supports power down/link down power saving
Supports PCI Message Signaled Interrupt (MSI)
Vibrationsdæmper til HDD, 2,5"
