Bi-directional converter for SATA and IDE.
SATA for 3½ "IDE HDD / SSD
3½" IDE for SATA HDD / SSD
431.00 kr
Item number CNV-UNI-HDD
Bi-directional converter for SATA and IDE.
SATA for 3½ "IDE HDD / SSD
3½" IDE for SATA HDD / SSD
Digital sound via Toslink optical fiber is converted to analogue sound - 3.5mm Jack
Digital sound via Coax cable is converted to analogue sound - 3.5mm Jack
Connect amplifier or headphones to the converter box.
With volume control
Supports SPDIF - 24 bit data
Power supply included 5VDC/1A
Manual switch between Toslink and Coax input
Digital ljud konverter til 2 x analog phono stik
REMAINDER SALE
MiniGBIC / SFP optical transceiver
LC
1310 nm
Up to 50 km single mode
Mini GBIC / SFP optical transceiver
LC fiber cables
1310 nm
up to 2 km multimode
Compactflash-kort på SATA-port, till 3 ½ "front mount
Compactflash-kort på SATA-port, med underlagsplattoma
Connect RS232 equipment directly to the PS/2 port on the PC.
Converts ASCII characters to HID commands - can be used for data collection.
PCI to PCI express converter
Parallel til seriel omformer
Hastighed: 300 -19.200 bit/s
Handshake: XON / XOFF
Forsyning: Strømforsyning medfølger, 9 VAC, 400 mA
CNV-PAR232 er ikke bi-direktionel og kan derfor ikke sende meldinger fra printer til pc om evt. blækstatus, ”end of paper” m.m.
Mini-PCI Type III til PCI Adapter kort/ konverter
1 x Mini-PCI Type III slot
Til 5V eller 3.3V PCI/PCI-X slots
Monteringsbeslag passer til alle standard kabinetter
SATA power adapter. SATA PSU for drives with MOLEX power connectors
Converter connector from a MOLEX (5¼”) power supply to a 6-pin connector. on the PCIE card.
Fra Mini DVI-D (kilden) til HDMI omsætter
Understøtter ikke lyd
Opløsning op til 1920 x 1200
10 cm kabel mellem DVI-D og HDMI stik
Mini DVI-D han og HDMI hun
Mini DVI-D to DVI-D transducer
16 cm cable between MDVI and DVI
Cable contributes to less physical loading of connectors
Support 5V SATA III, SATA II and SATA I Drive and SSD
SATA II 3Gbps Controller Mini Vertical Adapter Card
44 Pin 2.0 mm IDE male connector for 5V DC and ATA signals
PCBA and SATA drives powered by Pin 41 & 42 of IDE connector 5V input
Compliant with Serial ATA 2.6
Jumper setting supports IDE Master, Slave and cable selection modes
IEEE1394b bilingual FireWire800 cable, supports FireWire400
IEEE1394b tvåspråkig FireWire800 kabel, understøtter FireWire400
From 1 DisplayPort to 4 HDMI monitors
Horizontal Wide image distributed on 4 SIDE-BY-SIDE monitors
Input: up to 3840 x 2400 dots
Output: up to 1920 x 1200 for each monitor
Power supply included 5VDC / 2A