55 "TFT LCD stand with PCAP touch, 16:09
Rockchip RK3288 processor
Wifi, LAN (3G option), 802.11b / g / n
10 Points capacitive touch
2 x USB2.0
1 x HDMI output
1 x SD memory card
1 x RJ45
Resolution: 1920 x 1080
Response time: 6ms
Contrast: 1400: 1
Brightness: 500cd / m² for H.264, MKV, WMV9, MPEG 1/2/4, HD Divx, Xvid, RM / RMVB
100-240V AC
Operating temperature: 0 - 50 ° C
Large selection of medico wall brackets, arms etc
DANBIT A/S has a large selection of medical products. In addition to medico keyboards, we have just expanded the range with monitor arms with built-in gas spring and mobile carts in very good quality at competitive prices.
Fiber tester shows power and loss in a fiber cable
Used as remote unit for TEST-FIBER-PM-LS
Wavelength: 850nm, 1310nm, 1550 nm
Battery: 2 x AAA (included)
Fiber Tester. Measures how much loss there is in a fiber cable at the selected wavelength
3 x SFP ports (2 x Light Source, 1 x Power Meter)
SFP modules included:
650mm FP SC SFP
850mm VCSEL SC SFP
1310mm FP SC SFPT
1550mm FP SC SFP
FiTs Meter Module SC 850/1310/1490 / 1550mm
Purchase remote module TEST-FIBER-PM for measuring on mounted fiber cables
LC lock clip for LC Single mode duplex connector and fiber cable.
Easy installation.
Detachable design. Can only be used on LC connector 2.0, 3.0 mm.
Blue.
Break 100 meter border with VDSL over RG59 Coax cable
1 x RJ45 10/100 / 1000Mbit
Up to 300mbit / s - duplex (automatic speed optimization)
Unroubing Data connection
Temperature: 0-50 ° C
5VDC 2A Power supply included
75Ω cable must be used
Use 2 pcs. Eth-VDSL-RG + G to a connection
USB 3.2 type-C up to 5Gbit
Powered by USB Bus
IEEE 802.3 / 802 / 3h / 802.3ab
802.3az EEE (Energy Efficient Ethernet)
10/100 / 1000Mbit < br> IEEE 802.3x flow control at full duplex
Jumbo frame up to 4KB
IPv4 / IPv6
MDI / MDIX auto-crossover
Point to point USB extender over fiber cable.
Up to 350mets.
Select OM3 Multi Mode Fiber with LC connector
TX: 1x Micro-B USB, RX: 1x Type-A USB.
Compatible With USB 3.2 Gen 1
Plug-and-Play - no drivers.
Data transfer: 1.5 Mbs, 12 Mbs, 480 Mbs for 4 x USB2.0 ports
RJ45 on Transmitter and Receiver
Cat 5e/6 or more (straight through)
Use ONLY quality patch cord
Up to 120 meters
No driver needed
only 5V voltage on the transmitter (PSU included)
Receives the power supply via network cable
NOT RECOMENDED FOR USB CAMERA!
USB extender - also touch screen with USB.
Data transfer: 1.5Mb / s, 12Mb / s, 480Mb / s
2 x USB2.0
receiver powered from the transmitter with 24VDC of RJ45 cable
1 x Transmitter
1 x Receiver
Cat 5 or higher (only straight lines)
Up to 50 meters
Wall mounting
Supporter also touch screen
No driver needed
24VDC power supply included
NOT RECOMENDED FOR USB CAMERA!
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel) Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
10 meters
non-galvanically isolated
Supply From HDMI Source
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
5 meters
non-galvanically isolated
Supply From HDMI Source
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
3 meters
non-galvanically isolated
Supply From HDMI Source
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
2 meters
non-galvanically isolated
Supply From HDMI Source
Smoke alarm with a diameter of 15 meters
installation up to 11 meters high
With potential-free relay contact
Smoke sensitivity: EN 54-7:2000+ A1:2002
Operating temperature: -10 to +55 °C
Dimensions: Ø100 mm, h 47 mm
Weight: 100 g
door magnet with clamping force up to 140kg
Stainless steel and vandal proof
supply voltage of teams: 12 or 24VDC, 6Watt
Automatic switching between 12 and 24VDC
Active with applied voltage
no holding power by energized
Operating temperature: -10 - 55°C
Magnetic: 200 x 36 x 23 mm
Door-plate: 152 x 32 x 10 mm
Mounting plate for the frame included
weight: 1.2kg
Outdoor RJ45 coupler
RJ45 cables with bend relief:
It may be necessary to remove about 3mm of bend-relief
cables with extra shackle the trigger must often be removed
Page-wings at the release may have to be removed/minimized.
2 x RJ45 shielded she
IP68 waterproof
8PC8C
Tilbehøt to DOOR-MAGNET-MINI
bracket for mounting the door magnet on the side of the frame
Strong Aluminum
Rev: LO
Designed for narrow frames, gates, out-swing, in-swing and glass doors.
Weather resistant: IP65, designed for harsh outdoor environment.
Vandal-resistant stainless steel casing.
Low maintenance, High reliability.
No holding force at zero voltage.
Holding force: 600 lbs (272 Kg).
Suitable for harsh environment.
Anti-Residual Magnetism (ARM).
Armature Plate: 185, 38, 12 mm.
Magnet: 218, 44, 27.5 mm.
Dual voltage 12 or 24 VDC.
Weight: 1.5 Kg.
8 x 10/100 / 1000Tx RJ45 IEEE 802.3at PoE + 2 x 100/1000 SFP Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
20Gbps Back -Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Power Supply : 48 ~ 55VDC
Built-in relay Output for Power Failure
IP30 Rugged Metal Case Design
DIN-Rail and Wall mounting
Operating temperature STD: -10 ° to 70 ° C
