Waterproof DC-DC Step-Down converter
Input 24VDC, Output 12VDC 5A 60W
Overcurrent, overtemperature, short circuit protection
260.00 kr
Item number DC-DC12V-60W
USB-C to USB-A adapter
USB-A 2.0
Made of aluminum
Transfer speed of max. 480 Mbps
EXIT button for ADGANG15-RF4
Can be used as remote-controlled OUT-PRESSURE
The purpose of the RXIT button can be many
Frequency band: 433 MHz
Range: up to 50 meters from controls (LOS)
Battery operation: 12VDC (23A)
Operating time: up to 13,000 button presses
Dimensions: 115 x 40 x 32 mm
Remote control for ADGANG15-RF4
Battery: 12VDC (23A)
Battery operation for approx. 13,000 keystrokes
IP65 sealed
Keychain
1 button for door opening
Dimensions: 55 x 30 x 13 mm
Access control with learning function
Supported from a maximum of 15 wireless remote controls
Frequency band: 433MHz
Range: up to 50 meters (LOS)
Relay output for electric door lock (24V/3A)
Entry to Exit button
Selectable timers: 1, 3, 5, 10 seconds
Wall mountable with flanges
Dimensions: 83 x 62 x 30 mm
Plastic housing
Managed Industrial switch for harsh environments
Cybersecurity SSHv2/TLSv1.2
Ethernet Ring Protection
e-Mark Certified (vehicles/ITS)
Can support 2.5Gbit SFP module
8 port industrial Gigabit switch, RJ45 with PoE+
Intelligent PoE
2-port SFP 100/1000/2500Mbps
Supply voltage: 48-54VDC
PoE power budget: 240W
Redundant power supply connection
IGMP snooping, MLD snooping
IEEE 1588 Time synchronization protocol
ONVIF - discovery / Floor Map
Modbus TCP real-time (SCADA)
Extended temperature range from -40 to +75 °C
DIN rail or wall mounting
Dimensions: 152 x 107 x 77 mm
Transmits HDMI video and audio and USB up to 150 meters over network cable
Transfers HDMI video and audio and USB over local TCP/IP network
USB is for keyboard and mouse only
Set with transmitter and receiver
1920 x 1080 @60Hz
A transmitter to multiple receivers over non-managed switch.
Supports keyboard and mouse ONLY
Supports TCP/IP and local EDID
HDMI 1.3 / HDCP 1.2
Transmitter: 1 x HDMI, 1 x USB-B, 1 x RJ45 Ethernet
Receiver: 1 x HDMI, 2 x USB-A, 1 x RJ45 Ethernet
built-in auto-adjustment system
Built-in ESD protection system
Power supply: DC 5V/1A (supplied)
Dimensions: 92 x 70 x 25 mm
Dual Band 802.11ax 3000Mbps Ceiling-mount Wireless Access Point
Max. wireless speed of 2400Mbps (5GHz) & 600Mbps (2.4GHz)
Supports up to 256 simultaneous client users
2 x 10/100/1000BASE-T RJ45 port
4 x Internal 4dBi antenna (2.4G x2, 5G x2)
Modes: AP, Gateway, Repeater
WPA3 / WPA2 / WPA support
Ceiling mount
Dimensions: 185.82 x 185.82 x 36.6 mm
Supports 48V DC PoE and 12V DC input
Operating temperature range: -20 to 55°C
Weight: 380 g
Shielded USB 2.0 Type-A female connector with screw-terminal interface. Allows you to connect USB cables directly to wire via screw terminals — ideal for custom installations and test setups.
Shielded USB 2.0 Type-A male connector with screw-terminal interface. Enables direct wire-to-USB connection using screw terminals—ideal for custom installations and prototyping.
Stationary barcode, QR code reader with USB
Suitable for reading mobile phone screen
4mil/0.1mm
Reading distance: 15 - 340mm (depending on code)
Scan mode: Manual via PC, Continuous, auto-detect
Dimensions: 69 x 69 x 31 mm
Temp: -20 - +50°C
Interface: USB
ADDITIONAL OPTION: Alternative version with USB-COM or RS232
Read 1D and 2D barcodes
Battery capacity: 2200mAh, 16 hours of operation time
Reading distance: 30mm to 600mm
Functions: Manual, Auto Sense and Continuous Scan
USB, wireless 2.4G and Bluetooth communication
Scan speed: 65CM/s, charging time 6.5 hours
Supports many barcode symbologies including QR codes
Dimensions: 60x115x170mm
Weight: 160g
1D, 2D, QR code bar code scanner
Handheld with 1.8 meter USB cable
Supports the most common codes.
Scanner mode: Manual, continuous, auto-sense
Light source: red light
Scanner: 640 x 480 CCD camera
Print contrast level: >15%
Temp: -20 - +55°C
Drop height: max. 1.5 meters
Interface: USB
Communication via USB
Weight: 290g
Scanning mode: Manual, Continuous, Auto-detection
Dimensions: L184 x W74 x H93mm
Metal bracket for 1 x Keystone Rj45
DIN-Rail 35mm
1 outlet
Stainless steel
Supplied without the Keystone adapter, it must be purchased separately
Metal bracket for 2 x Keystone Rj45
DIN-Rail 35mm
2 outlets
Stainless steel
Supplied without the Keystone adapter, it must be purchased separately
Tang for cable installation
Krone LSA punch
Wall outlet with RJ45 female plug
STP "shielded Twisted Pair" shielded outlet
Krone LSA puncher is used for mounting cables
2 Meter
PD Charger cable
Data transfer up to 480Mbps
240Watt
48V/5A PD240W(Max) / 480Mbps /PD140W / PD100W / PD60W
PD3.1/E Chip