10 pcs. Independent high voltage 15A relays - SPDT (Form C)
Relay spade terminals. COM, NO, NC
Web Server for Browser-based setup and control
No software or device drivers required
XML status and control page make PC applications simple
Can function as a Modbus/TCP slave
On / Off and Pulses
DIN rail Mountable - Open Board
LED Indicates the current relay mode
Ideal for industrisal applications
Power supply: 9 - 28 VDC / 1.5A
UL Approved relays (E197852).
Net adapter with mini UPS 12W, 2,1A
Connection to 5.5 x 2.1mm
Entrance 95-265 VAC
Exit 12VDC 1A 12W
3.7V Lithium-Ion 18650 type Battery (2600mAh)
short circuit protection
Backup time: 6W is less than 30min
Backup time: 12W is less than 10 min
dimensions 87 x 59.8 x 29 mm
S/FTP cat. 6 network cable, patch cable with RJ45 connector
Can be angled 45° or 90° to the right, left, up or down
Screen: S/FTP
Supports speeds up to 10 Gbit/s
Gray
0.5m
Plug length: 4cm
Length of plastic housing: 2.5cm
AC / DC power supply for your rail mounting
AC Input: 85 - 264Vac
Effect: 60W
Output voltage: 24V / 2.5A
Screw terminal
Adjustable output voltage for 24 to 29V
Working temperature: -30 - + 70 ° C
Dimensions: 90 x 54.5 x 62.5 mm (H, D, B)
Waterproof Outdoor PoE+ Injector 30Watt
1 x RJ45 Data
1 x RJ45 Data and PoE+
1 x 2-pin DC Phoenix connectors
IK10 Vandal safe
Supply voltage: 24 - 56VDC
POE Standard: IEEE 802.3 at / af
End-Span
Pin: (+ 1.2) (- 3.6)
Operating temperature: -40 - +75°C
wall mounting
Size: 170 x 73 x 44 mm
Weight: 340g
Gigabit PoE splitter for indoor installation
PoE++ (60W) splitter with optional DC output for non-PoE equipment
DC output: 12VDC/5A or 19VDC/3.2A or 24VDC/2.5A
1 x RJ45 port for PoE++ in from switch or PoE Injector
1 x RJ45 port (data) for non-PoE equipment
1 x DC Jack connector (5.5/2.5mm) for equipment
PoE standard: IEEE 802.3at/bt (PoE++)
IEEE 802.3at (PoE+ Mid-span)
IEEE 802-3bt (PoE++ PoH HDBaseT) - type 4
Operating temperature: 0 - +50°C
Wall bracket
Additional DIN brackets
Dimensions: 94 x 70 x 39 mm
Weight: 265g
IP67 and IK10 Gbit PoE injector for outdoor mounting
PoE++ (60W) injector for PoE equipment
1 x RJ45 port for PoE++ out Data+PoE
1 x RJ45 port Data in
1 x Phoenix connector for the input voltage
DC24V 72W input
DC36V 71W input
DC54V 66W input
PoE standard: IEEE 802.3at/bt (PoE++)
PoE out Mid-span / End-span
Operating temperature: -40 - +75°C
Wall bracket
Dimensions: 170 x 73 x 44 mm
Weight: 425
AC / DC power supply for your rail mounting
AC Input: 180 - 500VAC
Effect: 60W
Output voltage: 48V / 1.25A
Screw terminal
Adjustable output voltage for 48 to 57VDC
Working temperature: -30 - + 85 ° C
target: 125 x 102 x 32 mm (H, D, B)
AC / DC power supply for your rail Mounting
AC Input: 180 - 500VAC
Effect: 60W
Output voltage: 12V / 5A
Screw terminal
Adjustable output voltage for 10.8 to 13.2v
Working temperature: -30 - + 85 ° C
target: 125 x 102 x 32 mm (H, D, B)
Cabinet lock - 150kg. Locked with voltage
Voltage: 12VDC / 180MA
Holding force: 150kg
Size: 50 x 31 x 27 mm
Weight: 0.18kg
Cabinet lock - 150kg. Locked without voltage
trigger voltage: 12VDC / 180MA
Holding force: 150kg
Size: 50 x 31 x 27 mm
Weight: 0.18kg
RF / coaxial adapter / converter connector
SMA to TS9 He
Jack Connector
Silver colored.
Length: Approx. 1.5 cm
Mini UPS 12VDC, 25Watt
Battery Capacity 2600mAh
DC Male Jack, OD 4MM, ID 1.7mm
Dimensions: 68mm x 42mm x 74mm
Weight: 280g
ABS plastic house for Exit button
target: 38.5 x 38.5 x 48 mm
Center hole: 20 mm
4 x mounting holes for attachment
rubber gasket included
13.56MHz Mifare RFID and QR code
Free SDK available
Power supply: DC 12V
Operating temperature: -20℃ ~ 70℃
Possible in 8 digits ID for time attendance recording.
High capacity with 8 digits card number.
Programmable Password 4 digits PIN for each person.
16*2 rows of LCD display with 8 digits for displaying year, month, day, week, time events counter.
For 19mm mounting hole
12VDC
IP65
NO/COM/NC
Momentary reset
Metal
Built-in Web server
Web HMI
Modbus TCP and Modbus UDP protocols
Good communication security
2 x RJ45 Daisy Chain, only data is continued Further to Dual Watchdog
Operating temperature range: - 25 ~ + 75 ° C
I / O Pair Connection - Input Mirrors to another's output
8 x Power relay - electromechanical, COM NO
Rel becoming: On: 10ms, Off: 5ms
Relay Contact voltage and current: 24VDC / 250VAC / 5A
Electromechanical: Avoid inductive load
supply voltage: POE or 12 - 48VDC
The switch is for touch-free access.
Up to 15 cm activation distance (30 - 150mm)
Touchless EXIT switch with relay output
IR motion technology
Adjustable hold timer 1-60 seconds
Adjustable activation distance 3 - 15cm
With blue and green LED
Relay contacts for 12 - 28VDC, 2Amp
Robust ABS plastic front
Supply voltage: 12 - 24VDC
Dimensions: 86 x 86 x 10 mm
Optional aluminum back piece - see picture and Accessories
Output contact for access control with cunduct / breaking function
robust plastic house with steel Back plate
Contact: NO / NC / COM
Momentary Contact press
Contact: Max 3A
Size: 86 x 86 x 42 mm
Passive Exit Button
