Home

IEC C14 male plug - appliance plug
Mains plug for cable mounting

C19 Coupler – Stable power supply for demanding equipment

This grounded, 16A, polarized C19 coupler is designed for IT and industrial environments where reliable power connection to high-performance equipment is required.

Ideal for servers, high-power workstations, UPS systems, large network switches, blade enclosures and advanced medical equipment.

With its rectangular design and parallel pins, it ensures correct connection and safe operation – even with high current demands.

Perfect for both data centers and environments where stable power supply is critical.

Servers and powerful workstations

UPS and PDU units

Larger network and telecommunications equipment

High-current medical equipment

MAX 16A, 250Vac

Please note that the connector design may vary from the picture. Please contact us regarding any changes.

2x 10Gbit Ethernet RJ45
Max. Data transfer 20000Mbit/s
Net standard IEEE 802.1Q,IEEE 802.3,IEEE 802.3ad,IEEE 802.3x
Vollduplex 10,100,1000,10000 Mbit/s
Full Duplex support
Chipset BCM57810S
Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)
Superior small packet performance
SR-IOV
Active Health Systems support
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor (Sea of Sensors)
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)

Input SDI signal via BNC female
Output USB3.0/BNC female/HDMI
Max video reolution 1920x1080 (1080p)
60FPS Frames per second max
Audio port 3.5mm
Working Temp. -20℃-65℃
OBS Player support
Windows/Linux /Android/MAC

TNC to TNC male feeder connector Extension antenna Coaxial Cable 10M for Trimble RTK GNSS GPS antenna receiver

Receiver to transmitter BOOST-HDMI150-U-IRT

HDMI video and audio and USB up to 150 meters over network cable

HDMI video and audio and USB over local network

USB is only for keyboard and mouse

Recipient

1920x1080 @60Hz

Multiple receivers to transmitter over non-managed switch.

Supports keyboard and mouse ONLY

Supports TCP/IP and local EDID

HDMI 1.3 / HDCP 1.2

Receiver: 1 x HDMI, 2 x USB-A, 1 x RJ45 Ethernet

built-in auto-adjustment system

Built-in ESD protection system

Power supply: DC 5V/1A (included)

Dimensions: 92 x 70 x 25 mm

Transmitter to BOOST-HDMI150-U-IRR receiver

Transmits HDMI video and audio and USB up to 150 meters over network cable

Transmits HDMI video and audio and USB over local network

USB is only for keyboard and mouse

Sends

1920x1080 @60Hz

One transmitter to multiple receivers over non-managed switch.

Supports keyboard and mouse ONLY

Supports TCP/IP and local EDID

HDMI 1.3 / HDCP 1.2

Transmitter: 1 x HDMI, 1 x USB-B, 1 x RJ45 Ethernet

Built-in ESD protection system

Power supply: DC 5V/1A (included)

Dimensions: 92 x 70 x 25 mm

Hot plug support and plug and play

Virtual display to avoid signal loss and screen changes when the display connection is interrupted

Memory function in case of power failure

Maximum resolution: 2560 x 1440@60HZ / 3840 x 2160@60HZ

Steel whip antenna for LTE, GSM
Magnetic foot
Wide Band 2 - 6 GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
SMA he
Dimensions: 150 mm, Ø30 mm foot

10.1" Robust in Vehicle tablet
Qualcomm Cortex-A53, 64-bit Octa-core, 1.8GHz
Android 9.0
2 GB LPDDR3 RAM (4GB can be purchased)
16 GB eMMC (64GB can be purchased)
Bluetooth 4,2 WLAN  IEEE 802.11a/b/g/n/a & 4G LTE, HSPA+
USB Type-C & USB Type-A
2 x RS232
1 x RS485
2 x CANBUS CAN 2.0b
GPIO
RJ45
IP6x & IPx7
Operating temperatures -20°C ~ 65°C (-4℉~149℉)
Power DC8-36V
Dimensions 273×183×49mm
Weight 1,6kg

Break the 100 meter limit with VDSL over RG59 coax cable
1 x RJ45 10/100 Mbit
Up to 94 Mbit/s - duplex (automatic speed optimization)
Transparent (untouched) data connection
128-bit AES encryption
Frequencies: 2 - 28MHz
Same device can be Master or Slave (DIP)
Establishes even the best connection
Dimensions: 97 x 70 x 26 mm
Temperature: 0-50°C
5VDC 2A power supply included
75Ω cable must be used
Use 2 pcs. ETH-VDSL-RG for a point to point connection
Use 1 pc. Master for 4 pcs. Slaves - 1:4

Protocol converter from M-BUS devices to PC/PLC which is Modbus Master
Up to 20 M-BUS units (meters)
RS485 Modbus interface for Modbus master
Free setup software
Supply voltage: 18 - 35VDC, 15 - 21VAC
Max. power consumption: 4 Watt
Baud rate: 1200 - 115,200 baud
Galvanic isolation
Temperature: -40 - +70°C
Dimensions: 71 x 60 x 60 mm

Steel whip antenna for Access Point
Magnetic foot
Dual Band 2.5GHz / 5.8GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
RP-SMA male / RSMA male connector
Dimensions: 150 mm, Ø30 mm foot

Duplicate one DVI-DL+ Audio input to multiple DVI-DL+Audio outputs
Support up to 2560 x 1600 resolution
Automatic power-saving when DVI input is lost
EDID Copy function ensures accurate output display
Read and store the EDID from the connecting display to the video extension system
Compatible with most of the popular screen resolution to XGA, SXGA, UXGA, WSXGA ….Full HD, WUXGA system.
Simple LED indicatior makes operation userfriendly
Plug-n-Play system configuration
Alternatively perform the default or the copied EDID for the connected display device
Unique DVI-SL / DVI-DL Switch for accurate EDID configuration

RJ45 connector with pass-through
For 23AWG Ethernet cable

Compact 5 port Ethernet switch for 100Mbps
Not Managed
Very economical: max. 2 Watt
Supply voltage: 12 - 48VDC
Can also be powered with 24VDC
With redundant voltage input
Dimensions: 104 x 70 x 30 mm
Weight: 255 grams
IP30, metal housing
DIN bracket

Mounting: Desktop or Wall Mount
Construction: Heavy Duty Cold Rolled Steel
Color: Black (Standard), or special colour on requist
Support Micro ATX M/B (120ATXR) (Max. to 9.6" x 9.6")
Drive Capacity: 2x 5.25" CD-ROM & 2x 3.5" FDD &1x 3.5" HDD
Power Supply (Optional): PS/2 Size Single or Mini Redundant ATX P/S (Rear Installation) Max. Depth 190mm
Cooling: 1x (120mm = 90.0CFM ea.) Fan
Front Door: Single Door With 2 Thumbscrews
Air Filter: Inside Front Danel (Washable)
Connector Port (Front): 2x USB Ports (on special request)
Thermal Management Card
Indicators: LEDs for Power ON/OFF, HDD Active, Fan, Temperature
Flexible Hold Down Bar Designed
Switch: Power ON/OFF, System Reset, Buzzer Reset
Dimensions (W x H x D): 400 x 177 x 420mm (15.7" x 7.0" x 16.5")
GW: 15.0 kgs / 33.1lbs
Humidity:55% - 95% Non-condensing
Power supply,DVD, Floppy is not included.

Gold plated SMA adapter.
Round + hole to round + hole

Gold plated antenna cable adapter
Flange + hole for external thread + pin

LGA 1700 
Aluminium
Noise Level: MAX. 53dBA
Air Volume: MAX. 47CFM
Two Ball Bearing
4 Heat Pipes
CPU hole distance: 78x78mm
Fan Speed: Max 8000 RPM
FAN size 60x60mm
Material: aluminium
TDP 180W
Can be used in 2U