Input: 1× BNC, compatible with CVBS (analog), AHD, TVI, CVI signals
BNC input: up to 8 MP (approx. 4K) for TVI/AHD/CVI; video output via HDMI in up to 1080p/60Hz
Output: 1× HDMI, full HD 1080p at 60 Hz can be set to 720p on output
Loop-out on the BNC output
11x1x1cm
5Vdc supply
Durable rubber surface for use on feet and floors
Can be permanently mounted to floor or other surface
Non-slip, durable rubber surface
Metal, 4-hole mounting flange
A normally open contact connected to a 3.5mm jack
3.6 m cord
Compatible with all X-keys USB Switch Interface, Wire Interface and GPIO devices
Base Ø: 64mm
Mounting flange Ø: 83mm
Pressure force, edge: 400g
Pressure force, center: 900g
MTBF >20 million presses
Cable length: 3.6 meters
Media player 4K Ultra HD
Remote control included
HDMI or VGA output
Supports AV (analog video)
Auto Play, Video Loop
Play from USB or SD card
FAT32/NTFS
4K (3840*2160 30hz)
DC 5V 2A, included
HDMI Extender - extender, over CAT 5/6 cable
HDMI 1.3, 3D
1080p/60Hz
70 meters at 720p
40 meters at 1080p
Bandwidth: 2.25Gbps
Audio: LPCM 2.0
USB Micro (TX device)
The RX unit is powered by the TX
At short distance - no external voltage
Steel-armored fiber cable
Single mode
4 cores
4 x LC on each end
9/125my
Robust casing
Black
Cable thickness: 9 mm
160m
Industrial Single Mode Media Converter
100Mbit FX
Single Mode fiber (9/125)
SC - duplex
10/100Mbit RJ45
IEEE802.3U
Fiber: 15 km
RJ45 100 meters
Supply voltage: 5VDC
Temperature: 0-50°C
Dimensions: 94 x 70 x 26 mm
Weight: 0.2kg
Holding voltage: 24VDC/90mA
Holding force: 150kg
Dimensions: 64.1 x 40 x 25 mm
weight: 0.18kg
Optional Access system - see Accessories
Surge protection - NOT galvanic isolation
Transmits PoE
Standard RJ45 ports – Supports Cat5, Cat5e, Cat6, and Cat7 connectors.
Full 8-pin protection – Ensures stable power and data transfer to PoE devices.
High-quality components – Premium surge protection elements extend the lifespan to approximately five years.
Low insertion loss – Less than 0.2 dB, maintaining high-quality network signal transmission.
Standard desktop installation – Designed for easy and stable placement
Durable aluminum housing – Improves heat dissipation and fire resistance
IP67 waterproof rating – Provides excellent protection against dust, water and harsh environmental conditions.
Surge Protector for Gigabit Networks
Transient protection
Accepted voltage on network: 48Volt
Max. voltage on network: 60Volt
Response time: <25 nanosecond
Insertion loss: 0.2dB
Temperature: -40 to +80°C
DIN-mounted
Surge protection - NOT galvanic isolation
NOT FOR POE - Max DC is 20VDC !!
Standard RJ45 ports – Supports Cat5, Cat5e, Cat6, and Cat7 connectors.
Full 8-pin protection – Ensures stable power and data transfer to PoE devices.
High-quality components – Premium surge protection elements extend the lifespan to approximately five years.
Low insertion loss – Less than 0.2 dB, maintaining high-quality network signal transmission.
Standard desktop installation – Designed for easy and stable placement
Durable aluminum housing – Improves heat dissipation and fire resistance
IP67 waterproof rating – Provides excellent protection against dust, water and harsh environmental conditions.
Working Voltage Un (V) 6/12
Limiting Voltage Up (V) 20
Normal Discharge Current In (kA) 5
Maximum Discharge Current Imax (kA) 10
Response Time (ns) 1
Insertion Loss (dB) ≤0.2
Transmission Rate (bit/s) 1000M
Working Temperature -40℃～+80℃
VDSL Extender - transmitter (receiver)
IP over 2-wire connection.
Transparent data.
Automatic speed optimization
Plug & play
Supply voltage: 12VDC
Temperature: -40 to + 60°C
Dimensions: 97 x 85 x 24 mm
VDSL Extender - transmitter/receiver
IP over 2-wire connection.
Transparent data.
Automatic speed optimization
Plug & play
Supply voltage: 12 - 24VDC
Temperature: -40 to + 60°C
Dimensions: 97 x 85 x 24 mm
PoE extender with 1 x PoE in and 2 x PoE out
PoE extender to 100 meters.
Powered from the PoE source.
Power consumption: 2W
PoE to next extender
Up to 500 meters
100/1000Mbits
IEEE802.3af/at/bt
Temperature: -20 to +60°C
Dimensions: 133 x 73 x 41 mm
Antenna cable for Wifi
RSMA male to RSMA female
Nut + hole for external thread + tap
LCC200 (55db per 100m at 2.4GHz)
50 ohms
Gold-plated connectors
10 meters
3 Port DisplayPort Splitter
8K@60Hz/4K/120Hz
DisplayPort 1.4
Support three screen display
5V DC Power (USB)
PoE Extender up to 500 meters
Max speed 100Mbps
Automatic speed control
Consists of Local and Remote Module
The connection is Coax cable
Local module powered from PoE source or DC input
DC input: 48-56VDC
PoE power: 30 Watts
Dimensions: See drawings
Temperature: -20 - +60°C
Up to 800 meters - Network extender over RJ45 UTP/STP patch cable
PoE is transmitted in cable from PSE to PD
PoE in to RX, PoE out from RX
1 x 10/100Mbit BASE-TX RJ45 with PoE
Data speed: up to 100Mbit auto-optimization
Auto-optimization / auto-MDI/MDI-X
PoE Standard: IEEE 802.3at/af
PoE Output: 48-56VDC from 15.6 to 67 Watts
1 x RJ45 for VDSL + PoE
PoE in (RX) pin 1/2/4/5(+), 3/6/7/8(-)
PoE out (TX) pin:1,2,4,5(+), 3/6/7/8(-)
Distance: 100m w/PoE+, 500m w/PoE, 1000m without PoE
Purchase power supply from 48-56VDC min. 2Amp
Dimensions: 104 x 70 x 30 mm
Universal replacement key compatible with K333 / 5333 / 333 locks. Used for electrical cabinets, caravans, elevators, and more. Durable metal design, ideal as a spare or replacement key.
USB Foot Pedal with Software
HID macros via USB
2m cord
Pressure-activated switch
ABS plastic
100x63x42mm
OS: Windows, MAC, Linux
Compatibility Notice: Ensure your USB-C (3.0 and later) device supports video output (DisplayPort Alt Mode or Thunderbolt).
Connect your USB Type-C device to any HDMI display in stunning 4K resolution. This durable aluminum alloy adapter delivers smooth, flicker-free visuals with excellent heat dissipation and long-lasting build quality. Perfect for work presentations, streaming, and gaming.
USB Programmable Keypad with 18 keys
USB HID
Button macro program: MacroWorks
Easy and simple programming
The setup is saved in the keyboard.
Works with all operating systems
Multi-color addressable backlighting
KEY label sheet included
Dimensions: 178 x 76 x 50 mm
Weight: 455g - stands firmly on the surface
3 meter USB cable
Power consumption: max. 75mA
Power supply from USB port
Long-range LoRa wireless communication (non-LoRaWAN)
RS-485 MODBUS RTU protocol
1x Analog input 0–10V / 0–20mA / 4–20mA / ADC (0–10V)
1x Analog output sync-capable
1x Digital Input High/Low signal detection
1x Digital Output Supports PWM / Latch mode
AES-128/256 encrypted transmission
Rugged IP68-rated waterproof housing
Wide -40°C to 85°C operating temperature
Ideal for industrial, agricultural, and environmental IoT
Low power for remote or battery-powered deployments
IP67 sealed USB 3.0 cable for outdoor mounting A male.
The other end is equipped with A male (not waterproof)
Counterpart is: K-USB3-WATER-S-3M
IP67 tight RJ45 chassis connector.
Fits cable connector: STIK-RJ45-WAT-KPB
Bayonet lock (quick release)
RJ45 female-female. Review
24mm hole - flange for 4 screws
IP67 tight RJ45 cable connector with quick coupling
Fits chassis connector: STIK-RJ45-WAT-CPB
Install RJ45 patch cable with connector attached
