Home

Tang for cable installation 
Krone LSA punch

Wall outlet with RJ45 female plug
STP "shielded Twisted Pair" shielded outlet
Krone LSA puncher is used for mounting cables

2 Meter
PD Charger cable
Data transfer up to 480Mbps
240Watt
48V/5A PD240W(Max) / 480Mbps /PD140W / PD100W / PD60W
PD3.1/E Chip

2 Meter
4 in 1 cable
USB to USB-C
USB-C to UCB-C
USB-C to IOS (lightning)
USB-A to IOS (lightning)
PD Charging (Power Delivery) 

8 USB ports, 4x USB-A, 4xUSB-C

DIN mounting

USB 1.1/2.0 compatible

480 Mbps, high-speed USB 2.0

10/100 Base-T Fast Ethernet

Current protection 500mA

Network protocols supported: TCP/IP, Static IP, DHCP

Operating temperature: 0 to 55°C (32 to 131°F)

Power supply: 12VDC, 1.5A

CE, FCC

Easy to use
DIP switch for disconnecting and connecting signal (easy to connect external cables/props)
Branch too high signal
Red for low signal
RS232 8 signals DCD, RXD, TXD,, DTR, DSR, RTS, CTS, RI.

120W USB Charging Station
GaN Charger Charging Hub 5
PD 3.0, QC 3.0, AFC, FCP, SCP, PPS fast charging protocol
Max. output on port 100watt
Apple 20W PD and Samsung PPS45W fast Charging
Load Charing: 1 port charging on USB-C 100watt, If 2 Port Charging on USB-C 65W and 45W, If 3 port USB-C 65W,30W,20W
Load Charing USB-A: 1 port charingin on USB-A 18, 2 port 12W
If all 5 ports in use: 65W, 30W, 20W, 10W(USB-A), 10W(USB-A)
230Vac supply

Outdoor robust Dual Band Access Point etc.
AP, Gateway, Repeater, Wi-Fi Mesh
2.4GHz and 5GHz, 600/2400Mbit (3000Mbit)
Up to 256 clients Wi-Fi 6
1 x RJ45 Gigabit port PoE+
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-female connector
IP67 cast aluminum housing for mast mounting
Operating temperature: -40 - +70°C
Real-time Wifi channel analyzer
Dimensions: 295 x 231 x 80 mm
Weight: 2.5kg
Supply: PoE, 48V/0.5A (PoE+)

2 Meter
USB-C to USB-C
With PD (Power Delivery)
Up To 480GBs

Thermal resistance current transmission module for Pt1000
Power supply: 16 - 36VDC (two-wire loop power supply)
Output: 4 - 20mA
Connect I+ and GND I- to A/D input.
If A/D input is 0-10V, connect 125ohm across input
It will give 0-10V across the 125ohm resistor
For 2 - 3 lead platinum resistance PT1000 temperature sensor
Additional Pt1000 temperature sensor
Accuracy: 0.2% FS Related to the accuracy level of the connected platinum resistor
Dimensions: see drawings

EU standard frequency band network FDD-LTE/UMTS
SMS--Send/Receive/Delete
Wi-Fi 2.4Ghz 802.11g
Up to 10 users have access to WiFi
Nano SIM
5VDC 1A
Up to 150 Mbps MAX download speed
88mm x 28mm x 12.3mm / 25g

Input voltage: 10 - 30VDC

Output voltage: 48VDC

Max current: 8 Amp

Overvoltage, over-current protection

Waterproof, dustproof

Voltage regulation: <1%

Ripple: 180mVp-p

Switch frequency: 50kHz

Efficiency: 95%

Dimensions: 100 x 80 x 39 mm

Flange mounting

Weight: 550g

Temperature range: -40 to + 80°C

Cable length: 16cm

1 meter RS232 cable with DB9 female connector
With thumb screw
Pigtail cable which is terminated to a screw terminal
RX-TX-GND

Video Input: S-video input and RCA composite video
Output: USB Type-C
Video system support: NTSC, PAL and SECAM
Dimensions: 7.3cm x 2.5cm x 1.5cm
Power input via USB 5VDC

600 Mbps Dual band WiFi network card
USB
External antenna

Supports 2.4 GHz and 5 GHz

Windows Vista/XP/2000/7/8/10, for Linux, for MAC OS10.5-10.13

Data, SMS Applications
Standard AT Commands
Digital Input Channel to reset the System
USB 2.0 and  RS-232
DIN-Rail
Modem sells separatly

IEC C14 male plug - appliance plug
Mains plug for cable mounting

C19 Coupler – Stable power supply for demanding equipment

This grounded, 16A, polarized C19 coupler is designed for IT and industrial environments where reliable power connection to high-performance equipment is required.

Ideal for servers, high-power workstations, UPS systems, large network switches, blade enclosures and advanced medical equipment.

With its rectangular design and parallel pins, it ensures correct connection and safe operation – even with high current demands.

Perfect for both data centers and environments where stable power supply is critical.

Servers and powerful workstations

UPS and PDU units

Larger network and telecommunications equipment

High-current medical equipment

MAX 16A, 250Vac

Please note that the connector design may vary from the picture. Please contact us regarding any changes.

2x 10Gbit Ethernet RJ45
Max. Data transfer 20000Mbit/s
Net standard IEEE 802.1Q,IEEE 802.3,IEEE 802.3ad,IEEE 802.3x
Vollduplex 10,100,1000,10000 Mbit/s
Full Duplex support
Chipset BCM57810S
Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)
Superior small packet performance
SR-IOV
Active Health Systems support
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor (Sea of Sensors)
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)