Intel Core i7-8550U (option i5)
Kabylake Chipset
2x SO-DIMM DDR4 max. 32 GB of RAM
1x 10/100/1000Mbit Gigabit Ethernet., WIFI
2x RS232
3x USB3.0, 4xUSB2.0
1x VGA, 1xHDMI
mSATA 3.0 slot, 1xM.2
Audio (MIC,SPK)
Supports Auto Power On and Wake on LAN
Dimensions: 234x150x43mm
Cabinet: Aluminum
Desktop or wall mounting
OS Support: Windows 10
MDB Cable with USB Converter
USB-COM Port FT232RL
for integrating PAY terminal into a PC system
Demo software included
Power supply: 24VDC / VAC @ 0.5A (not included)
Dimensions: 100 x 50 x 30 mm
Reader/Writing Tracks 1, 2 and 3
Standards IBM, ISO, ANSI, DIN
USB With Emulation of COM Port
Dimensions 65mm × 215mm × 58mm
Supports only ASCII (no special signs)
Supported with 24VDC 2.2A power supply
Explosion-proof Load Cell
EX certified - hermetically sealed
load cells for tension and compression, 2 ton
Suitable for the oil industry and the like.
Loop-powered with 4-20mA outputs signal
Precision: 0.05%
Top-class weighing instrument from Interface
LCD screen, W x H - 117 x 86 mm
Display up to four channel channels per screenshot
With required Legal for Trade information
32 scale accumulations
Millivolt calibration, 5-point linearization and geographic calibration
NEMA Type 4X / IP66 stainless steel enclosure
Selectable A/D with measurement speed up to 960/second
100 set points, 30 configurable
64K uses built-in Non-V RAM
Power for 16, 350 ohm load cells per A / D card
Peak team
Load cell with shaft for measuring torque
capacities from 0.1Nm to 1kNm
speed up to 15,000 rpm
± 5vdc output (± 10vdc optional)
12 - 28vdc supply
Contactless data transfer to Stator
Digital electronics with on-shaft shunt
0.2% Combined error
10 kHz Sample Rate
12-bit resolution
measurement of speed and angle
3-axis Load cell with 3 outlets
simultaneous measurement of pressure and torque perpendicular to the pressure axis
Pressure axis works according to the same specifications Standard model
pressure stiffness and torque stiffness are both very high due to the Low Profile construction.
3-axis - ForceX, ForceY, ForceZ Load cell
3 x Strain Gauge Bridges
Series from 10n to 500 KN Power Area
Current model is for 120kN
Compact Size
Low Cross Talk
mV/V output
Temperature compensated
Made in Aluminum - De-stressed material
Load Cell series for the hard environment
the series is from 12.5n to 445Kn
current model is to 111Kn
Temperature compensated Strain Gauge
%FS: 0.03% High Output: 4mV/V For high accuracy
very low Deflection
made of stainless steel
Hermetical environmental sealed
Ceramic UHF Take against metal
survive Temp: -40 - + 250 ° C Short-lived
can autoclaved several times
operating temp: -40 - + 85 ° C
Alien Higgs-3 chip < Br> Objective: 10 x 5 x 3 mm
Weight: 0.8g
reading distance: Up to 3 meters (1 watt reader)
suitable for location against metal - can give better reading distance
read / write : 100,000 times
Data Storage: Over 10 years
IP68
Industriel tastatur med touchpad
89 taster
FN+CLEAN låser taster under rengøring
IP66
USB, 5VDC/250mA
Nordisk layout
Hvid bagbelysning (NVIS compliant)
Kabellængde: 2m
Dimensioner: 297.5 x 192.0 x 22.5mm (B x D x H)
Temperatur:
Operating temperature: -30℃ ~ +60℃
Storage temperature: :-45℃ ~ +70℃
Test:
Saline mist： 96h, IEC60512-6
Damp heat test at +40℃ : 21 days, IEC 60512-6
Dry heat test at +85℃ : 10 days, IEC 60512-6
Operating RH: 100%
Atmospheric pressure: 60-106Kpa
Shock: 3 x 11 ms pulses of 50g on each of 3 axes
Vibration: MIL-STD 810G-POWER SPECTRAL DENSITY: 0.04g/Hz, FREQUENCY RANGE: 20Hz - 2kHz, DURATION OF TEST PER
AXIS: 3 hours
Dual band RFID card reader for USB - 10 Decimal
125 kHz: EM-Marin EM41xx, EM4200
13,56MHz: Mifare - ISO14443A
HID - Keyboard Emulation
Reading distance: 5 to 8cm
Powered by USB
USB interface
operating temp. -10 ° to + 70 ° C
dimensions: 98 x 63 x 10mm (L x B x H)
HDMI female / Micro-D male cable for panel mounting
HDMI 1.4, 1080p
Cable length: 50 cm (incl. plug)
Colour Black
Miniature electronic holding magnet for cabinets
Supply voltage 12 VDC, minimum 140mA
Holding force: Up to 36 kg
with Bond sensor - Relay output COM, NC
Bond sensor is a closed indicator - Can inform the controller
Operating temperature: -10 ~ 55ºC
IP65 Stainless steel with epoxy filling
Magnet dimensions: 70 x 38 x 26 mm
Holding plate dimensions: 80 x 32 x 18.5 mm
Weight 350 g
21.5 "Industrial Panel PC
Projected Touch
Intel Celeron N2930 1.83 GHz
Mounted with 4GB RAM DDR3L (Option 8GB)
2xusb 3.0
2x RS232 (1 Support RS232,422,485)
IP66 Front
DC 9 ~ 36V Supply
Measure 557.3x362.3x64.8mm
21.5" FHD projected capacitive multi-touch screen
6th/7th gen Intel® Core ™ i7 / i5 / i3, Pentium® Celeron® processor (Haswell)
2.5" 7/9.5 mm SATA HDD, CFast ™ and mSATA
2 Gigabit LAN,
2 USB 3.0
2 USB 2.0
2 COM ports
IP65 flat front bezel and rugged design
Supports panel mount and optional VESA arm / desktop stand / wall mount
2 PCI Express Mini card slots
Power supply 19Vdc / 112Watt, 4 Pole
LAST IN STOCK BRAND NEW!
PICMG® 2.0 32-bit/33 MHz CompactPCI® specification
SMI-721 graphic controller with 8 M built-in VRAM
Max. 1280 x 1024, 24-bit true color
On-board 44-pin LCD interface, LCD brightness adjustable
cPCI-8217 is PXI compatible
cPCI-8217R is a 50 mm RTM with
Input voltage 95-265VAC
Manual Select voltage: 5V / 7.5V / 9V / 12V
Adapters for 3.5 x 1.35mm, 4.8 x 1.7mm, 5.5 x 2.5mm
Main DC connector 5.5 x 2.1mm
Digital with Microprocessor Control
Battery Level, Battery Life Led Indicator
Over Discharge, Overload, Short Circuit Protection,
Over Charge, Surge Protection
HDMI female/male cable for panel mounting
HDMI 2.0, 4K @ 60 Hz
Cable length: 50cm
Colour Black
USB 3.2 Gen 2x2 USB Type-C 20 Gigabit/s.
PCI-e 3.0 X4 bus (Supports X4/8/16 slot).
Power supply: Internal 15-pin SATA.
OS Support: Windows 8/10, Linux
Include Low-Profile and Standard PCI backplane.
