Tryck cellrad m / M20 x 1,5 gänga; Full belastning = 1000 kg
5,239.00 kr
Item number CR1000
Tryck cellrad m / M20 x 1,5 gänga; Full belastning = 1000 kg
Aktiv kylare för Socket 775, koppar, 890 g., Horisontell avgas
Socket 2011 Koppar Core, Horisontell avgas
Aktiv køler til Socket 2011, Kobberkerne
Aktiv køler til socket 2011, Kobber, Vandret udblæsning
Active cooler for socket 1366, Aluminum, Horizontal exhaust
Active cooler for socket 1366, Copper, vertical exhaust
Active cooler for Socket 1366, Aluminum
Aktiv kylare för Socket 479, koppar, 1U, horisontell avgas
Aktiv kylare för Socket 478, koppar, 2U, horisontella avgassystem, 46 dB
3 SATA RAID-kontroller med 2 x SATA och 1 x IDE
Supports PCI Express Specification Revision 2.0. (Compatible with PCI Express 1.0)
Extends two Serial ATA Gen3 6Gb/s ports. (Compatible with SATA Gen1 and 2)
Native Command Queue (NCQ) on SATA port.
Supports up to two storage devices connection with RAID 0 and 1.
Hardware RAID design reduces the system resource loading.
Built-in 2 standard SATA ports connectivity.
Works with various brands of large capacity SATA hard disk drives.
Low-profile design fitting for kinds of computer chassis (Optional).
Certified by CE, FCC, VCCI, BSMI, and RoHS.
Support Windows 2000/XP/2003/Vista/7/8/8.1 (32/64-bit) ,Linux 2.6x, and DOS
EOL product last in stock
Supports 1-Lane 2.5Gbps PCI Express bus Spec. Revision 1.1.
Supports one Parallel-ATA (IDE) channel to expand two ATA/ATAPI storage devices.
Compliance with power management specification v1.1 and ACPI v2.0.
Supports system booting from add-on card function.
Low-profile design fitting for kinds of computer chassis (Optional).
Certified by CE, FCC, VCCI, BSMI, and RoHS.
Support Microsoft Windows, Linux, and DOS operation system.
Microsoft Windows 2000, XP, 2003, and Vista 32/64 system, Linux 2.6.x.
EOL product! LAst in stock.
Optiskt isolerad RS232-adapter, max. 115,2 kbps, automatisk flödeskontroll, DB9-kontakt
RS232 galvanic isolator, 2500VAC
Transmits Tx, Rx, RTS and CTS
Up to 115 kbit/s
Input: DB9 female, output: DB9 male
RX, TX, ON indicator
12VDC / 100mA (-12V, +gnd)
Power supply included (3.5/1.3mm)
transfer mode RS422 - full duplex
max.transfer rate 115 kb/s
max. line length 1 200 m
transfered signals RxD, TxD
selectable terminator 120R
connector RS232 D - SUB 9 pin F
connector RS422 D - SUB 9 pin M
galvanic indication (LED) red PWR, yellow RxD, green TxD
power supply 12V + -10%
input supply max. 1W
dimension 63 x 17 x 34 mm
RS232 for RS485 converter
Opto-insulated
Galvanic isolation between DC input and RS232 port
Supply voltage: 9 - 50VDC, 10 - 34VAC
Automatic flow control
Up to 1.2km Built-in Termination Resistance - Can be Disconnected
Screw Terminals
Kapsling för 2,5 "HDD 3.5" HDD w / SATA-anslutning
Output voltage selects with special & nbsp; jumpers
Universal power supply for notebooks
input 12 - 24VDC 90W
Switch mode converter from 12-15 VDC
For 3VDC / 5VDC / 6VDC / 7.5VDC / 9VDC or 12 VDC
Max. 2 Amp
4 DC Jack connector included
110VAC to/from 230VAC universal transformer
Connect 110VAC equipment to 230VAC mains voltage
Connect 230VAC equipment to 110VAC mains voltage
Cable with EU male plug and US male plug can be purchased separately - may NOT be used outside the LAB environment!!
The cable has 2 male plugs and is therefore very dangerous in unskilled hands !!!
No galvanic isolation between primary and secondary
VGA to HDMI 4K Scaler converter
Push buttons for selecting resolution
1 x VGA input
1 x Aux audio input
1 x Mini USB input
1 x HDMI output
Operating temperature: 0°C ~ 40°C
Dimensions: 93 x 84 x 28 mm
Weight 160g
Adds eight high-speed RS-232/422/485 serial ports via USB connection
2k bytes transmitter and receiver
Requires no IRQ, DMA, I/O port
RS-232 max bit rates of up to 1 Mbps
RS-422/485 maximum bit rates of up to 10 Mbps
Automatic transmission buffer control for 2-wire RS-485 half-duplex operation
Biasing and terminating resistors installed on board
Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Supported RS-422 signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 2-wire signals: Data-, Data+, GND
Data Bits: 7/8
Parity: None, Even, Odd, Mark, Space
Stop Bit: 1, 2
Flow Control: Hardware (RTS, CTS), XON/XOFF
Monitor LEDs for TxD, RxD indicating port status
Built-in AC to DC switching power supply, 100VAC to 240VAC
Virtual COM port drivers available for Windows 11, 10, 8.1, 8, 7, Vista, 2003, XP, 2000
Win Server: 2000 up to 2018, Linux, MAC
Industrial quality metal case with DIN bracket for DIN rail mounting