Home

Standard Cell m / M8 x 1,25 Anslutningsgänga; Full belastning = 50 kg

The standard load cell m / M8 x 1.25 thread
S-beam type
Full Load = 5 kg
Maximum load: 7.5kg

Standard cell m / M8 x 1.25 gevind; Full load = 20 Kg

Standard Cell m / M8 x 1.25 thread; Full load = 10 Kg

PLC to DC 12-24V with 12v DC / analog inputs and 8 transistor

GPS-referenced Stratum-1 NTP server

> 10,000 NTP queries per second (approximately 600,000 per minute)

Built-in TCXO (Temperature-Compensated Crystal Oscillator) – ensures continued accuracy in the event of GPS failure

32-channel GPS antenna provides stable reception

Gigabit Ethernet (1GbE) with IPv4 and IPv6

NTP authentication: MD5, SHA1 and SHA256 for high security

Web interface and CLI for configuration and monitoring

RS232 output with timecode

Universal AC/DC power supply

NTP Server - Atomic clock for 19 rack mounting.

Signal from DCF77 in Frankfurt (77.5kHz)

Not recommended in EMC noisy environments.

Rod antenna with 5 meter cable with BNC male

Purchase antenna cable 50 ohm, BNC male/male

Additional purchase BNC-ASSEMBLE

With network port and serial port

1U for rack mounting

Powered from 230VAC.

NTP Server - Atomic clock - radio transmitter in Frankfurt DCF77 signal

77.5kHz receiver. Not recommended in EMC noisy environments

Stand-alone NTP time server

Dynamic IP address from DHCP or manual selection of IP address

Antenna is active ferrite antenna included

LCD display for date and time

Built-in battery back up RTC

Signal strength display

Configuration via Web browser, Windows or Linux tool

Lokal forvarslingslarm til brug til fx olietank med SMS og e-mail

Local forvarslingslarm to use the fx olietank

PLC with 6 analog inputs and 4 relay outputs, DC 12-24V

Mini PLC for DC 12-24V
12 x DC / Analog inputs
8 x transistor outputs

PLC to DC 12-24V with 12 DC/ indgange og 8 relæudgange.

Mini PLC for DC 12-24V
12 x DC / Analog inputs
8 x relay outputs

Mini PLC for AC 110-240AC
12 x analog inputs
8 x relay outputs

DC 12-24V, 6 pcs. DC / inputs, 4 transistor outputs

6 pcs. DC / analog inputs, 4 transistor outputs, DC 12-24V

Supporterer 32-bit 5 V PCI bus
16-bit A/D resolution (PCI-9111DG)
16-CH single-ended analog inputs
Op til 100 kS/s sampling rate
On-board 1 k-sample A/D FIFO
Programmerbar forstærkning på x1, x2, x4, x8, x16
Bipolar analog input-område

Supporterer 32-bit 5 V PCI bus
12-bit A/D resolution (PCI-9111DG)
16-CH single-ended analog inputs
Op til 100 kS/s sampling rate
On-board 1 k-sample A/D FIFO
Programmerbar forstærkning på x1, x2, x4, x8, x16
Bipolar analog input-område

6 pc. DC / input, 4 relay output, DC 12-24V

Supporterer 3.3 V eller 5 V PCI bus
12-bit A/D og sampling rate op til 110kS/s
16-CH single-ended or 8-CH differential inputs
On-board A/D FIFO
Bipolar eller unipolar analog input område
16-CH TTL DI og 16-CH TTL DO
2-CH 12-bit multiplying analog outputs

6 AC inputs and f4 relay outputs. AC 110-240V

4 kanaler, 16 bit A/D dataopsamler, PCI Express X1
4 differential indgange - op til +/-10VDC
Sample rate er 500kHz per kanal
68 polet VHDCI hunstik
Terminalkort tilkøbes - TERM68 + kabel

4 channels, 14 bit PCI Express x1

Stand-alone access control in IP68 sealed housing

ADGANG20-RFID is a stand-alone access control that can control an electronic door lock.
Identification: Via keyboard or RFID EM card/chip.
User capacity: Max. 2000 users.
Identification time: < 20 ms.
RFID Reader: EM type for 125 kHz.
Checking the door lock:
Relay output with make and break function 12VDC or 24VDC / 6Watt
Housing: IP68 sealed stainless metal housing

Technically demanding product - Support hours can be purchased additionally