Home

To prevent loss of data during power failure
Compact Tower UPS 1000VA / 600Watt
Output voltage: 230VAC / 50Hz
Line-interactive means switching at power failure (2-6ms)
Battery time: 25% load for about 18 minutes
Noise level: Less than 40 dbA at 1 meter
Modified sine wave (staircase curve)
4-6 hour recharge time to 90% capacity
Auto restart on mains supply restored
Supports automatic shutdown via software download USB and RJ45 port, touch display
Battery: 2 pcs. 12V / 7Ah - see manual for life
Not suitable for printers and scanners
Dimensions: 320 x 182 x 130 mm
Weight with battery: 8.2 kg
Operating temperature: 0 - + 40 ° C

To prevent loss of data during power failure
Compact Tower UPS 1500VA / 900Watt
Output voltage: 230VAC / 50Hz
Line-interactive means switching at power failure (2-6ms)
Backup time: 50% load for about 6 minutes
Noise level: Less than 40 dbA at 1 meter
Modified sine wave (staircase curve)
4-6 hour recharge time to 90% capacity
Auto restart on mains supply restored
Supports automatic shutdown via software
Battery: 2 pcs. 12V / 9Ah - see manual for life time 
Dimensions: 320 x 182 x 130 mm
Weight with battery: 10.6 kg
Operating temperature: 0 - + 40 ° C

To prevent loss of data during power failure
Compact Tower UPS 800VA / 480Watt
Line-interactive means switching at power failure (2-6ms)
Nødforsynings time: 50% load for about 3 minutes
Noise level: Less than 40 dbA at 1 meter
Modified sine wave (staircase curve)
4-6 hour recharge time to 90% capacity
Auto restart on mains supply restored
Supports automatic shutdown via software
Battery: 1 pc. 12V / 7Ah - see manual for life
Dimensions: 279 x 142 x 101 mm
Weight with battery: 4.9 kg
Operating temperature: 0 - + 40 ° C

Avoid data loss in the event of a power failure
Compact Tower UPS 600VA/240Watt
Line-interactive means switching on in case of mains failure (2-6ms)
Emergency supply time: 50% load for approx. 6 minutes
Noise level: Less than 40 dbA at 1 meter
Modified sine curve (stair step curve)
4 hour recharge time to 90% capacity
Auto restart when mains supply is re-established
Battery: 1 pc. 12V/7Ah - see manual for lifespan
Dimensions: 279 x 142 x 101 mm
Weight with battery: 4.2 kg
Operating temperature: 0 - + 40°C

High End DisplayPort Extender
Resolution Up to UHD 4K, 3840 x 2160 @ 30Hz
single cable, CAT 6A up to 100 m
point-to-point connection
Plug and Play; No software drivers required
with Edid
supply voltage: 12VDC - Both TX and RX
can power the other device over the patch cable
Dim: 102 x 66 x 30 mm

Fast USB extender - ideal for USB cameras and the like.

USB 3.2 Gen 1 extender with data speed up to 5 Gbps

USB Type-C

Supports all USB 3.1, 2.0, 1.1 devices simultaneously with full bandwidth

Set of transmitter and receiver with 4-port HUB

3 x USB 3.2 Gen1 Type-A ports

1 x USB Type-C

Receiver powered by USB C port: Up to 2W

12VDC 1.5A power supply included for receiver

RJ45 cable, CAT6a/7 up to 100 m

Point-to-point connection

Suitable for cameras, touch screens, etc.

Does NOT support DP Alt Mode

Keyboard with 128 programmable keys to 8 rows x 16 buttons
USB HID
Works with all operating systems
MacroWorks 3.1 Software for Windows and Mac included
Blue and red addressable backlight under each key
Add special characters to keyboard

8 pieces. 22mm buttons in a robust safety orange box
Buttons with make-contact (NO)
Key-force activation 770g
USB switch box with DB15HD plug
For harsh environments, IP65, water -, oil and chemical resistant
Cable 5meter. USB A connector on the cable from the switch box
Dimensions: 320 x 57 x 48 mm
Weight: 567g
High Force buttons in protected groove to prevent accidental
Hanger bracket for attachment of cable
Designed for low voltage - below 32VDC / 1A (no high voltage)
Perfect for industrial processes
Macro programmed in X-KEYS USB box
macros in USB KEY ROBUST8 Plug and Play

2 pcs. 22mm buttons in a robust security orange box
push-buttons with connectors
Pressure power for activation 770g
X-Keys USB contact boxes - See our selection
for harsh environments , IP 65, water, oil and chemical resistant
2.9 meters Robust cable for 3.5mm connector
target: 133 x 57 x 48 mm
Weight: 567g
High Force buttons in Protected recess to prevent accidental activation
bracket for attachment of cable
design for low voltage - under 32VDC / 1A (not high voltage)
Perfect for start / stop (Macro programmed in X-KEYS USB box) For example: Control and display menus in industrial screens
Next and back buttons in computer controlled automation systems

Ethernet Gateway for CANopen networks and Modbus RTU
1 x RJ45 10 / 100Mbps
Protocol: Modbus TCP Server
1 x RS232 / RS485 port (non-isolated)
Modbus RTU slave
Baud rate: 1200-115200
1 x CAN port
CANopen
CAN Baud rate: 10K - 1M
Built-in 120 ohm termination
Dimensions: 122 x 72 x 33 mm
Supply voltage : 10 - 30VDC, 2,5Watt
Operating temperature: -25 - + 75 ° C
DIN bracket

17" Waterproof screen with analogue Video input for surveillance cameras, among other things
Resolution: 1440 x 900
1 x analogue TV
Response time: 8ms
16:9
Power: DC12V/3A/36w
Mounting: 100 x 100
Power supply and remote control included

21.5 TFT LCD 1000 nits. (Available with Alm 250 CD / M2)
Intel 6/7 Gen CPU I3 / I5 / I7. Active cooling
H170 chipset
max. 32GB RAM, 2x260 Pin So-Dimm DDR4 2133 MHz SDRAM
4 x USB-A 3.0
2 x RJ45 Gbit Ethernet
2 x RS232 / 422/485, 1 x RS232 DB9
MPC extension
2x Pcie X1 / X16
RAID Support
IP66-rated Front
OS Support: Win Embedded 7, 8.1 Windows 10 IoT

21.5" Stainless steel Panel PC
TFT 1920x1080
6th Gen. CPU i3/i5 CPU support
Max 16GB RAM
M12 8 pin connectors
2x USB 2.0, 1 x USB 3.0
1 x COM
1 x CAN
1x LAN (POE IS OPTION)
Flat Front design
Stainless steel grade 304. (option 316)
Touch option Resistive, Projected Capacitive, Glass
ON/OFF on side
Vesa mount 100x100, Option Yoke Mount
571x362x55 mm
​10KG

Compact Modbus / TCP to RTU / ASCII gateway with PoE
not to be programmed
1 x RJ45 10 / 100Mbps
1 x RS232 (terminal block) - 5-pin
1 x RS485 (terminal block ) - 2-pin
baud rate up to 115,200 bps
Self-tuner for RS232
IEEE 802.3af - PoE (PD)
Supply voltage u / PoE: 12 - 48VDC 2Watt
Dimensions: 90 x 52 x 27 mm
DIN bracket
Operating temperature: -25 - +75°C

Compact Modbus / TCP to RTU / ASCII gateway with PoE
not to be programmed
1 x RJ45 10 / 100Mbps
1 x RS232 / RS485 / RS422 (terminal block)
Choose only one COM port as interface
3-pin RS232 (RX, TX, GND)
baud rate up to 115,200 bps
Self-tuner for RS232
IEEE 802.3af - PoE (PD)
Supply voltage u / PoE: 12 - 48VDC 2Watt
Dimensions: 90 x 52 x 27 mm
DIN bracket
Operating temperature: -25 - +75°C

Compact Modbus / TCP to RTU / ASCII gateway with PoE
not to be programmed
1 x RJ45 10 / 100Mbps
1 x RS485 / 422 (screw terminal)
baud rate up to 115,200 bps
Self-tuner for RS485 / 422
Automatic transmission / reception direction of RS485
IEEE 802.3af - PoE (PD)
Supply voltage u / PoE: 12 - 48VDC 2Watt
Dimensions: 90 x 52 x 27 mm
DIN bracket
Operating temperature: -25 - +75°C

Compact Modbus / TCP for RTU / ASCII Gateway with PoE
must not be programmed
1 x RJ45 10 / 100Mbps
1 x RS232 (DB9 Han)
Supports Modbus TCP / UDP Master and Slave
Supports Modbus RTU / ASCII Master and Slave
Baud Rate Up to 115,200 BPS
Self-Tuner for RS232
IEEE 802.3af - PoE (PD)
Supply voltage U / Poe: 12 - 48VDC 2Watt
Goal: 90 x 52 x 27 mm
DIN bracket
Operating temperature: -25 - + 75 ° C

Supports M-Bus Standard: EN-13757, CJ / T -188
1 x RJ45 Modbus TCP
1 x M bus for maximum 100 slaves
M-Bus Power limiter
1 X RS232 for firmware update
Modbus TCP / RTU Function code 0x03 and 0x04 To read measurement data
Baud rate: DIP switch to M-Bus and serial port from 300 to 115200 BPS. Standard M-Bus port- Data format: data bit 8, parity straight, stop bit 1
supports up to 100 m bus slaves
m-bus power protection
short circuit protection on M-bus
Firmware updates via serial port
gives PWR, MTX and MRX 3 LED Indicators
Wall Mounting
Dim: 123 x 102 x 40 mm
Supply voltage: 10 - 30VDC

RS485 / RS422 / RS232 Master Gateway to Meter-Bus Slaves (sensors, actuators, etc.)
Supports up to 100 Meter-Bus meters (slaves)
MODBUS RTU function codes: 0x03 and 0x04 readdata
Selection of serial port, only one can be selected to be active
Baud rate x 2 (M-bus and COM port can be selected at different speeds)
Baud rate M-bUS: 300-2400 bps
Baud rate COM port: 300-115200 bps
Transparent data - no protocol conversion
M-BUS connection, 2-wire, max. 350meter.
Greater distance up to 5km requires a number M-bus repeaters
Supply voltage: 10 - 30VDC, 1.8 - 12Watt
Dimensions: 122 x 72 x 33 mm
Removable terminal blocks
Operating temperature: -25 - + 60°C
DIN mount 
Robust plastic case

RS485 / RS422 / RS232 converter for Meter-Bus meters, actuators, etc.
Supports up to 100 Meter-Bus meters (slaves)
Selecting the serial port, only one can be selected to be active
2 x Baud rate (M-bus and COM port can be selected at different speeds)
Baud rate: 300 to 115,200 bps
Transparant data - no protocol conversion
M-bus connection is 2-wire , max. 350meter.
larger distance up to 5km requires a number of M-bus repeaters
Supply voltage: 10 - 30VDC, 1.8 - 12Watt
Dimensions: 122 x 72 x 33 mm | Removable terminal blocks
Operating temperature: -25 - + 75 ° C
DIN bracket
Robust plastic housing