Access control with learning function
Supported from a maximum of 15 wireless remote controls
Frequency band: 433MHz
Range: up to 50 meters (LOS)
Relay output for electric door lock (24V/3A)
Entry to Exit button
Selectable timers: 1, 3, 5, 10 seconds
Wall mountable with flanges
Dimensions: 83 x 62 x 30 mm
Plastic housing
Managed Industrial switch for harsh environments
Cybersecurity SSHv2/TLSv1.2
Ethernet Ring Protection
e-Mark Certified (vehicles/ITS)
Can support 2.5Gbit SFP module
8 port industrial Gigabit switch, RJ45 with PoE+
Intelligent PoE
2-port SFP 100/1000/2500Mbps
Supply voltage: 48-54VDC
PoE power budget: 240W
Redundant power supply connection
IGMP snooping, MLD snooping
IEEE 1588 Time synchronization protocol
ONVIF - discovery / Floor Map
Modbus TCP real-time (SCADA)
Extended temperature range from -40 to +75 °C
DIN rail or wall mounting
Dimensions: 152 x 107 x 77 mm
Transmits HDMI video and audio and USB up to 150 meters over network cable
Transfers HDMI video and audio and USB over local TCP/IP network
USB is for keyboard and mouse only
Set with transmitter and receiver
1920 x 1080 @60Hz
A transmitter to multiple receivers over non-managed switch.
Supports keyboard and mouse ONLY
Supports TCP/IP and local EDID
HDMI 1.3 / HDCP 1.2
Transmitter: 1 x HDMI, 1 x USB-B, 1 x RJ45 Ethernet
Receiver: 1 x HDMI, 2 x USB-A, 1 x RJ45 Ethernet
built-in auto-adjustment system
Built-in ESD protection system
Power supply: DC 5V/1A (supplied)
Dimensions: 92 x 70 x 25 mm
Dual Band 802.11ax 3000Mbps Ceiling-mount Wireless Access Point
Max. wireless speed of 2400Mbps (5GHz) & 600Mbps (2.4GHz)
Supports up to 256 simultaneous client users
2 x 10/100/1000BASE-T RJ45 port
4 x Internal 4dBi antenna (2.4G x2, 5G x2)
Modes: AP, Gateway, Repeater
WPA3 / WPA2 / WPA support
Ceiling mount
Dimensions: 185.82 x 185.82 x 36.6 mm
Supports 48V DC PoE and 12V DC input
Operating temperature range: -20 to 55°C
Weight: 380 g
Shielded USB 2.0 Type-A female connector with screw-terminal interface. Allows you to connect USB cables directly to wire via screw terminals — ideal for custom installations and test setups.
Shielded USB 2.0 Type-A male connector with screw-terminal interface. Enables direct wire-to-USB connection using screw terminals—ideal for custom installations and prototyping.
12.1" PCAP Touch Panel Mount Display
VGA + HDMI input
P-Cap Touch, I/O: USB
Operating temperature: -10~60℃ (-25~60℃ with heater solution)
Brightness: 1000 nits
Panel Mount
IP65 front
Intel Gen. 13/12 LGA 1700 35W Processor Core/Pentium/Celeron
Intel R680E
TPM 2.0
Max. 64GB RAM
Quad display: 1xVGA (1920x1200), 3xDP 4096x2160), (3xHDMI 4096x2160 on special inquiry)
9 x USB3.2 (Gen.2)
6 x RS232/422/485
2 x 2.5GbE Intel i226-IT
4 x GbE Intel i350-AM4 or 4 x GbE POE+ (Expansion modul on request)
Audio line in/out
8 x Isolated DI and 8 Isolated DO (2 x 9-pin Terminal block)
2x 2.5" Sata III
2 x M.2
2 x SIM socket
-40°C ~ 70°C
240x200x88mm
9-48V DC Input with Ignition Control
CE/FCC Class A
OS Support: Windows 10 IoT, Windows 11 (IoT/Professional), Linux
1D, 2D, QR code handheld scanner
3mil, fast decoding,
Wireless: 2,4G (100m), BT 4.2 (30m)
Storage for approx. 20.000 bar codes
Leading light: white
CCD camera: 1280x800
Scan mode: Manual, Continous, Auto-sense
Working hour (full chrg.) >16 hours
Support all standard bar codes
USB interface to host
Temp: -20 - +55°C
Stationary barcode, QR code reader with USB
Suitable for reading mobile phone screen
4mil/0.1mm
Reading distance: 15 - 340mm (depending on code)
Scan mode: Manual via PC, Continuous, auto-detect
Dimensions: 69 x 69 x 31 mm
Temp: -20 - +50°C
Interface: USB
ADDITIONAL OPTION: Alternative version with USB-COM or RS232
Read 1D and 2D barcodes
Battery capacity: 2200mAh, 16 hours of operation time
Reading distance: 30mm to 600mm
Functions: Manual, Auto Sense and Continuous Scan
USB, wireless 2.4G and Bluetooth communication
Scan speed: 65CM/s, charging time 6.5 hours
Supports many barcode symbologies including QR codes
Dimensions: 60x115x170mm
Weight: 160g
1D, 2D, QR code bar code scanner
Handheld with 1.8 meter USB cable
Supports the most common codes.
Scanner mode: Manual, continuous, auto-sense
Light source: red light
Scanner: 640 x 480 CCD camera
Print contrast level: >15%
Temp: -20 - +55°C
Drop height: max. 1.5 meters
Interface: USB
Communication via USB
Weight: 290g
Scanning mode: Manual, Continuous, Auto-detection
Dimensions: L184 x W74 x H93mm
Desktop version
USB stik
3 keys, quality brushed stainless steel, 1.4mm Key movement
Mouse Optical Encoders provide high resolution more than +800DPI
38.1mm/1.50" (19mm, 25mm, 50mm also available)
107.0mm x 120.0mm x 52.1mm ( L x W x H)
-20ºC~+ 65º C
OS Support: All Windows, Linux, Unix, Mac OSX, Vxworks, Android, (U-cos--To be confirmed)
EMC: EN 55032:2015, EN 55035:2017
RoHS compliant, CE and FCC certified, ESD
HDMI and USB over fiber
Video resolution max up to 4Kx2K@60Hz(4:2:0), 4K*2K (3840x2160@30Hz), 1080P@120Hz and 1080P 3D@60Hz.
Transmits HDMI signals up to 10 km (6.2 miles) through a single LC/LC single core fiber optic cable.
Compatible with Multi Mode fiber cable, up to 300 meters
Equipment with two 10G SFP Optical modules.
USB 1.1 only Keyboard and mouse
Supports up to 7.1 channel and LPCM, Dolby TrueHD, DTS-HD Master Audio.
Compliance with HDMI 1.4 standard.
High compatibility, can automatically match source and display device.
Built-in automatic adjustment system, makes the image smooth, clear and stable.
Simple to install, plug and play.
DC5V/2A power supplies (2) included
Metal bracket for 1 x Keystone Rj45
DIN-Rail 35mm
1 outlet
Stainless steel
Supplied without the Keystone adapter, it must be purchased separately
Metal bracket for 2 x Keystone Rj45
DIN-Rail 35mm
2 outlets
Stainless steel
Supplied without the Keystone adapter, it must be purchased separately
Industrial keypad with steel front
Low profile key
X/Y pos: 40 points per mm
For front mounting
With 4 threaded rods M3 mm
IP65 front
USB
OPTION: PS/2
DC5V/17mA - from USB
Dimensions: Touch pad: 60 x 45 mm
Dimensions: Front: 95 x 90 mm
Dimensions: Depth: 35 mm
Dimensions: Threaded stay: 13 mm
Temp: -20 - +65°C
Temperature logger with 4 channels
For Thermocouple sensors
K: -270 - + 1370°C
J: -210 - +1200°C
Temperature: -270 - +400°C
S: -50 - +1760°C
R:: -50 - +1760°C
Internal memory for 960,000 loggings
Expand memory with SD card
LCD Display
Log interval: 100mSec to 60min
Accuracy, excluding sensor: +/-0.5°C - 1.5°C
USB 2.0 interface
Battery operation: 2 x AA batteries (60 days)
USB 5VDC operation
Dimensions: 120 x 75 x 32 mm
Weight: 140g
Operating temperature range: 0 - +50°C
Wall outlet with RJ45 female plug
STP "shielded Twisted Pair" shielded outlet
Krone LSA puncher is used for mounting cables
2 Meter
PD Charger cable
Data transfer up to 480Mbps
240Watt
48V/5A PD240W(Max) / 480Mbps /PD140W / PD100W / PD60W
PD3.1/E Chip
2 Meter
4 in 1 cable
USB to USB-C
USB-C to UCB-C
USB-C to IOS (lightning)
USB-A to IOS (lightning)
PD Charging (Power Delivery)
8 USB ports, 4x USB-A, 4xUSB-C
DIN mounting
USB 1.1/2.0 compatible
480 Mbps, high-speed USB 2.0
10/100 Base-T Fast Ethernet
Current protection 500mA
Network protocols supported: TCP/IP, Static IP, DHCP
Operating temperature: 0 to 55°C (32 to 131°F)
Power supply: 12VDC, 1.5A
CE, FCC
Easy to use
DIP switch for disconnecting and connecting signal (easy to connect external cables/props)
Branch too high signal
Red for low signal
RS232 8 signals DCD, RXD, TXD,, DTR, DSR, RTS, CTS, RI.
WLAN LINK - AP (auto WDS), AP (TDMA), Station (WDS/TDMA) and Station (ARPNAT)
Supports ATPC function to reduce mutual interference between the CPEs
WMM (Wi-Fi multimedia) gives higher priority to multimedia transmission
Coverage threshold to limit the weak signal from clients on the line
Real-time Wi-Fi channel analysis graph and client limit control for better performance
Supports Terminal Fast Roaming with 802.11k, 802.11v and 802.11r
120W USB Charging Station
GaN Charger Charging Hub 5
PD 3.0, QC 3.0, AFC, FCP, SCP, PPS fast charging protocol
Max. output on port 100watt
Apple 20W PD and Samsung PPS45W fast Charging
Load Charing: 1 port charging on USB-C 100watt, If 2 Port Charging on USB-C 65W and 45W, If 3 port USB-C 65W,30W,20W
Load Charing USB-A: 1 port charingin on USB-A 18, 2 port 12W
If all 5 ports in use: 65W, 30W, 20W, 10W(USB-A), 10W(USB-A)
230Vac supply
Patch cable CAT.6A RJ45 S/FTP 500 MHz
For Gigabit Ethernet & 10 Gigabit Ethernet & PoE
Overall screen and pairs in metal foil (PiMF)
AWG 26/7 100% copper wire
LSZH (halogen-free and flame-retardant), IEC60332-1-2
ISO / IEC 11801, EN50173 & TIA / EIA-568
15.6" TFT WXGA 16:9 LCD
2 touch models Touch Resistive 5-wire / Projected Capacitive Standard is Resistive Touch
50,000 hrs LED Backlight Life
Resolution up to 1366 x 768 (WXGA)
400 nits Brightness
Designed with Aluminum Die-cast Front Frame
IP 65 Compliant Front Panel
Convertible Display System (CDS) Supported
420 x 254 x 66.2 mm (W x D x H)
Safety: UL, cUL, CB, IEC, EN 62368-1
Outdoor robust Dual Band Access Point etc.
AP, Gateway, Repeater, Wi-Fi Mesh
2.4GHz and 5GHz, 600/2400Mbit (3000Mbit)
Up to 256 clients Wi-Fi 6
1 x RJ45 Gigabit port PoE+
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-female connector
IP67 cast aluminum housing for mast mounting
Operating temperature: -40 - +70°C
Real-time Wifi channel analyzer
Dimensions: 295 x 231 x 80 mm
Weight: 2.5kg
Supply: PoE, 48V/0.5A (PoE+)
2 Meter
USB-C to USB-C
With PD (Power Delivery)
Up To 480GBs
Thermal resistance current transmission module for Pt1000
Power supply: 16 - 36VDC (two-wire loop power supply)
Output: 4 - 20mA
Connect I+ and GND I- to A/D input.
If A/D input is 0-10V, connect 125ohm across input
It will give 0-10V across the 125ohm resistor
For 2 - 3 lead platinum resistance PT1000 temperature sensor
Additional Pt1000 temperature sensor
Accuracy: 0.2% FS Related to the accuracy level of the connected platinum resistor
Dimensions: see drawings
EU standard frequency band network FDD-LTE/UMTS
SMS--Send/Receive/Delete
Wi-Fi 2.4Ghz 802.11g
Up to 10 users have access to WiFi
Nano SIM
5VDC 1A
Up to 150 Mbps MAX download speed
88mm x 28mm x 12.3mm / 25g
Automatic RS-485 Direction Control
3-way 3000 VDC Isolation Protection
Transmission Speed of up to 115200 bps
ESD Protection for RS-485 Data Line
MAX. total 65 Watt
GaN technology
110-240Vac
2 x USB-C
2 x USB-A AC (QuickCharge)
max current capacity
3 A max. performance 65 W
Output:
USB-C™ PD1 (single) max. 65.0W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 3.0 A (27.0 W) DC
12.0 V max. 3.0 A (36.0 W) DC
15.0 V max. 3.0 A (45.0 W) DC
20.0 V max. 3.25A (65.0 W) DC
USB-C™ PD2 (single) max. 18.0 W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 2.0 A (18.0 W) DC
12.0 V max. 1.5 A (18.0 W) DC
USB-A QC1 max. 18.0 W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 2.0 A (18.0 W) DC
12.0 V max. 1.5 A (18.0 W) DC
USB-A QC2 max. 18.0 W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 2.0 A (18.0 W) DC
12.0 V max. 1.5 A (18.0 W) DC
Dimension 87.2 (L)x 91 (W)x 19.5 (H)mm
Weight 154 g
Input voltage: 10 - 30VDC
Output voltage: 48VDC
Max current: 8 Amp
Overvoltage, over-current protection
Waterproof, dustproof
Voltage regulation: <1%
Ripple: 180mVp-p
Switch frequency: 50kHz
Efficiency: 95%
Dimensions: 100 x 80 x 39 mm
Flange mounting
Weight: 550g
Temperature range: -40 to + 80°C
Cable length: 16cm
CAT 6A internet cable, 1m, S/STP
UL Approved and Fluke tested
Suitable for 10 Gigabit Ethernet
Copper conductor
PoE and PoE+ support
LSZH
AWG 26
Screen Size 18.5 inches
Resolution 1920x1080
Panel Brightness 1000nits
PCAP touch via USB
1 x VGA
1 x HDMI
12V DC input
Operating Temperature 0°C to 50°C
Resistive Touch Screen (Optional)
Protection Glass w/o Touch Function (Optional)
Optical bonding (Optional)
Screen Size 15,6"
Resolution 1920x1080
Panel Brightness 1000nits
PCAP touch via USB
1 x VGA
1 x HDMI (Optional)
1 x DVI (Optional)
12V DC input
Operating Temperature -10°C to 60°C
Optical bonding (Optional)
1 meter RS232 cable with DB9 female connector
With thumb screw
Pigtail cable which is terminated to a screw terminal
RX-TX-GND
Video Input: S-video input and RCA composite video
Output: USB Type-C
Video system support: NTSC, PAL and SECAM
Dimensions: 7.3cm x 2.5cm x 1.5cm
Power input via USB 5VDC
600 Mbps Dual band WiFi network card
USB
External antenna
Supports 2.4 GHz and 5 GHz
Windows Vista/XP/2000/7/8/10, for Linux, for MAC OS10.5-10.13
Data, SMS Applications
Standard AT Commands
Digital Input Channel to reset the System
USB 2.0 and RS-232
DIN-Rail
Modem sells separatly
Screen type 11.6" TFT LCD
Resolution 1920 x 1080
Brightness 350 nits
CPU Rock Chip ARM Cortex A55 RK3568 Quad-Core 2.0GHz CPU
Graphics card Mali-G52
Memory 4GB LPDDR4
Storage space 16 GB eMMC
OS support Android 12 (optional Android 13)
Communication WLAN: 802.11 b/g/n module
Bluetooth 4.2
IO ports 1 x Micro SD card slot
1 x USB 2.0
1 x micro USB 2.0
1 x LAN port (optional PoE function)
1 x Mini HDMI
3 x Pogo pin (left, right, bottom)
VESA Mount 75 x 75
12Vdc
295.8x189.6x26mm
21.5" TFT 1920x1080
standard 250Nits (on special request 100 or 1500 nits)
PCAB Multi Touch Screen, Support touch with glove/ Rain mode
Intel Core i5-1135G7 2.4GHz (up to 4.2GHz) Gen 11.
1 x SO-DIMM DDR4 3200MHz, MAX.32GB
M12 waterproff connectors
2 x Rj45 Intel Ethernet
1 x M.2 2280 NVMe SSD
1 x RS232
1x SATAIII
TPM 2.0
IP67K
VESA: 200x100 M4
Addons: "Optical Bonding", YOKE mount
541x337x56.2mm
10Kg
Stainless Housing SUS 316/ AISI 316
10% to 90% RH, NonCondensing
Working Temperature 0°C to 45°C
12Vdc (M12 Type)
CE, FCC
4K 60HZ up to 60m (HDMI 2.0)
4K 30HZ up to 120m (HDMI 1.4)
HDMI2.0/HDCP2.2
Point-to-Point
CAT6 cable recommended (at least CAT5e required)
IR transmition
5VDC Transmiter and Receiver
IEC C14 male plug - appliance plug
Mains plug for cable mounting
C19 Coupler – Stable power supply for demanding equipment
This grounded, 16A, polarized C19 coupler is designed for IT and industrial environments where reliable power connection to high-performance equipment is required.
Ideal for servers, high-power workstations, UPS systems, large network switches, blade enclosures and advanced medical equipment.
With its rectangular design and parallel pins, it ensures correct connection and safe operation – even with high current demands.
Perfect for both data centers and environments where stable power supply is critical.
Servers and powerful workstations
UPS and PDU units
Larger network and telecommunications equipment
High-current medical equipment
MAX 16A, 250Vac
Please note that the connector design may vary from the picture. Please contact us regarding any changes.
2x 10Gbit Ethernet RJ45
Max. Data transfer 20000Mbit/s
Net standard IEEE 802.1Q,IEEE 802.3,IEEE 802.3ad,IEEE 802.3x
Vollduplex 10,100,1000,10000 Mbit/s
Full Duplex support
Chipset BCM57810S
Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)
Superior small packet performance
SR-IOV
Active Health Systems support
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor (Sea of Sensors)
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)
Membrane keyboard - Nordic character set
78 keys - 0.45mm travel
Keys are gold against gold
>1 million impressions
IP65 on the front
With 8 pcs. threaded rod for mounting
DC5V/30mA
OPTIONS: PS/2
Temp: -20 - +65°C
Dimensions: 200 x 105 x 12 mm
Threaded stay: M3 thread
Threaded stay length: 14 mm
26" DNVGL-CG-0339, IACS-E10, IEC60945 4th marine monitor
350 nits
PCAP touch
Fanless
IP66 on the front
Resolution: 1920 x 1200 - 16:10 format
Active display area: 550 x 344 mm
1 x VGA
1 x HDMI 1.4
1 x DVI-D
Power supply: Terminal block 24VDC
DC input: 9 - 36VDC / 55W typical (DNV approval is only for 24Vdc)
Mounting: Panel (Flush) mount with IP66*, VESA100, Bracket mounting
Vibration: 0.7g@DNVGL CG-0339 (Class A)
Shock: 15G, 11ms duration
Optional: Remote control via RS232 D-SUB 9P
DIM: Day Mode, Dusk Mode, Night Mode
Dimensions: 621 x 433 x 86 mm
Cut out dimensions: 596 x 406 mm
Weight: 12.8 kg
Input SDI signal via BNC female
Output USB3.0/BNC female/HDMI
Max video reolution 1920x1080 (1080p)
60FPS Frames per second max
Audio port 3.5mm
Working Temp. -20℃-65℃
OBS Player support
Windows/Linux /Android/MAC
1.91 GHz Intel Atom E3845 CPU
Wall mount/VESA mount
1x 204-Pin SO-DIMM DDR3L-1066/1333Mhz, MAX. 8GB
2 x RS232/422/485 (M12)
2 x USB 2.0 (M12)
2 x 10/100/1000 Mbps Ethernet Intel i210-IT (M12)
1 x VGA
1 x 2.5” HDD drive bay (max. up 9.5 mm height)
1 x mSATA (enabled in BIOS setting)
1 x CFast™
-30°C to +60°C
210 x 366.83 x 83 mm (8.27” x 14.44” x 3.27")
9 to 36 VDC power input (M12)
OS Support: Win 10 IoT, WE8S, WES7, Linux
TNC to TNC male feeder connector Extension antenna Coaxial Cable 5M for Trimble RTK GNSS GPS antenna receiver
TNC to TNC male feeder connector Extension antenna Coaxial Cable 10M for Trimble RTK GNSS GPS antenna receiver
Receiver to transmitter BOOST-HDMI150-U-IRT
HDMI video and audio and USB up to 150 meters over network cable
HDMI video and audio and USB over local network
USB is only for keyboard and mouse
Recipient
1920x1080 @60Hz
Multiple receivers to transmitter over non-managed switch.
Supports keyboard and mouse ONLY
Supports TCP/IP and local EDID
HDMI 1.3 / HDCP 1.2
Receiver: 1 x HDMI, 2 x USB-A, 1 x RJ45 Ethernet
built-in auto-adjustment system
Built-in ESD protection system
Power supply: DC 5V/1A (included)
Dimensions: 92 x 70 x 25 mm
Transmitter to BOOST-HDMI150-U-IRR receiver
Transmits HDMI video and audio and USB up to 150 meters over network cable
Transmits HDMI video and audio and USB over local network
USB is only for keyboard and mouse
Sends
1920x1080 @60Hz
One transmitter to multiple receivers over non-managed switch.
Supports keyboard and mouse ONLY
Supports TCP/IP and local EDID
HDMI 1.3 / HDCP 1.2
Transmitter: 1 x HDMI, 1 x USB-B, 1 x RJ45 Ethernet
Built-in ESD protection system
Power supply: DC 5V/1A (included)
Dimensions: 92 x 70 x 25 mm
21.5", FULL HD 1920 x 1080 16.7m Colors
Brightness 250nits (Possibility: 1000nits)
IP69K
VGA, (Possibility HDMI)
USB for toutch screen control
PCAP Projected capacitive multitouch screen, touch with flat design
A true flat, easy to clean front surface with edgetoedge design
Full IP69K waterproof enclosure
SUS 316/ AISI 316 stainless steel for food and chemical industries
Waterproof sealed conduit pipe for cable protection
Support VESA / YOKE mount
Optical bonding (Possibility)
Operation temperature 0°C to 45°C
541 x 337 x 56.2 mm
12V DC
Pull-out shelf for mounting in 19" rack cabinet, black 1U shelf
Dimensions 482 x 350 x 44 mm (W x D x H)
Distance rails and can be adjusted.
Included: adjustable telescopic rails and screws for mounting in 19" rack cabinet
Outdoor 19" rack cabinet of 6U
Comes with installed fans in the top
Maxium load capacity 100kg
IP55 sealed
Weight is 50kg
Depth of 60cm
19” rackskab, 6U højt, 60cm dybt, til vægmontage
19” rackskab, 4U højt, 45cm dybt, til vægmontage
Mains cable with "device plug"
Male C14 for live equipment (IEC)
Female C13 for voltage receiving equipment (IEC)
250 VAC with ground
Approvals: CE, WEEE
Good quality
Contact the sales department for other lengths
15.6" PanelPC TFT-LCD with 1920x1080 resolution.
300 cd/m² (nits) luminance.
Contrast ratio: 500:1
Resistive Touch (USB)
Intel Celeron J1900 SoC
Option: i3,i5,i7 price reservation (when ordering, contact our sales department)
DDR3L/DDR4 (depends on CPU)
2 x USB port
1 x Gigabit Ethernet.
Robust stainless steel housing
6 pages IP65 rating for industrial environments.
VESA mounting 100/75 mm
Wall mounting bracket included
422 x 272 x 47mm (WxHxD)
Supply voltage: 24VDC
Power supply included
i7 Haswell i7 4578U 3.0GHz, Dual Core, 4 Threads 4MB Cache
2 x SO-DIMM DDR3L, Max. 16GB
TPD 28W
Intel Irus Graphics 5100
2 x Intel Gbit RJ45, Wake on Lan, PXE
6 x RS232/422/485 (2 is BIOS select RS422/485)
8 x USB (4xUSB3.0, 4x USB2.0)
SIM card slot
GPIO
HDMI, VGA (dual display support)
1x MSATA3.0, 1x mini PCIe
-20 ~ +75 Centigrade (requires special RAM)
OS Support: windows 7, 8, Windows 10, Linux
212,5x149,5x52mm
12Vdc
Hot plug support and plug and play
Virtual display to avoid signal loss and screen changes when the display connection is interrupted
Memory function in case of power failure
Maximum resolution: 2560 x 1440@60HZ / 3840 x 2160@60HZ
Steel whip antenna for LTE, GSM
Magnetic foot
Wide Band 2 - 6 GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
SMA he
Dimensions: 150 mm, Ø30 mm foot
10.1" Robust in Vehicle tablet
Qualcomm Cortex-A53, 64-bit Octa-core, 1.8GHz
Android 9.0
2 GB LPDDR3 RAM (4GB can be purchased)
16 GB eMMC (64GB can be purchased)
Bluetooth 4,2 WLAN IEEE 802.11a/b/g/n/a & 4G LTE, HSPA+
USB Type-C & USB Type-A
2 x RS232
1 x RS485
2 x CANBUS CAN 2.0b
GPIO
RJ45
IP6x & IPx7
Operating temperatures -20°C ~ 65°C (-4℉~149℉)
Power DC8-36V
Dimensions 273×183×49mm
Weight 1,6kg
Break the 100 meter limit with VDSL over RG59 coax cable
1 x RJ45 10/100 Mbit
Up to 94 Mbit/s - duplex (automatic speed optimization)
Transparent (untouched) data connection
128-bit AES encryption
Frequencies: 2 - 28MHz
Same device can be Master or Slave (DIP)
Establishes even the best connection
Dimensions: 97 x 70 x 26 mm
Temperature: 0-50°C
5VDC 2A power supply included
75Ω cable must be used
Use 2 pcs. ETH-VDSL-RG for a point to point connection
Use 1 pc. Master for 4 pcs. Slaves - 1:4
Protocol converter from M-BUS devices to PC/PLC which is Modbus Master
Up to 20 M-BUS units (meters)
RS485 Modbus interface for Modbus master
Free setup software
Supply voltage: 18 - 35VDC, 15 - 21VAC
Max. power consumption: 4 Watt
Baud rate: 1200 - 115,200 baud
Galvanic isolation
Temperature: -40 - +70°C
Dimensions: 71 x 60 x 60 mm
4 ch Network extender over 2-wire, RJ45 or Coax cable
Provides transparent Ethernet connection up to 2000 meters
Range with up to 46Mbps: max. 1200 meters COAX
Range with up to 28Mbps: max. 1000 meters RJ11
Range with up to 73Mbps: max. 699 meters RJ45 UTP
Range depends on cable quality etc.
4 x RJ45 for LAN
1 x RJ45 for Link (RJ11 can also fit in the female connector
1 x BNC Coax 75ohm
DIP switch to select Master or Slave mode
Dimensions: 155 x 86 x 26 mm
Cabinet: Metal
Weight: 347g
Supply voltage: 12VDC/1A
Temperature: 0 - +50°C
Steel whip antenna for Access Point
Magnetic foot
Dual Band 2.5GHz / 5.8GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
RP-SMA male / RSMA male connector
Dimensions: 150 mm, Ø30 mm foot
Duplicate one DVI-DL+ Audio input to multiple DVI-DL+Audio outputs
Support up to 2560 x 1600 resolution
Automatic power-saving when DVI input is lost
EDID Copy function ensures accurate output display
Read and store the EDID from the connecting display to the video extension system
Compatible with most of the popular screen resolution to XGA, SXGA, UXGA, WSXGA ….Full HD, WUXGA system.
Simple LED indicatior makes operation userfriendly
Plug-n-Play system configuration
Alternatively perform the default or the copied EDID for the connected display device
Unique DVI-SL / DVI-DL Switch for accurate EDID configuration
Fanless design (embedded heat pipe cooling solution)
12/13 generation CoreTM i9/i7/i5/i3 processor (Alder Lake-S/Raptor Lake-S)
Up to 60W GPU MXM module expansion
802.3af (15.4W)/802.3at(25.5W) Gigabit PoE ports
DP x2 + HDMI x 1 and DVI x 1 (supports 4 independent displays)
On/off delay control / configurable ignition current control
Supports TPM 2.0 and Time-Sensitive Networking (TSN)
Two mPCIe for optional WiFi/3G/4G/GPS or I/O expansion supported
Front-accessible I/O
1 x M.2 B for storage or 5G/LTE +1 x M.2 E-key for WiFi/BT
1 x M.2 M for NVMe SSD
285x230x 90 mm (9.84" x11.50" x 3.54"), fanless 285x230x110 mm (9.84" x11.50" x 4.33"), w/ FAN
DC 9~36V input
CE, FCC Class A, E-mark
optional extras
RJ45 connector with pass-through
For 23AWG Ethernet cable
Compact 5 port Ethernet switch for 100Mbps
Not Managed
Very economical: max. 2 Watt
Supply voltage: 12 - 48VDC
Can also be powered with 24VDC
With redundant voltage input
Dimensions: 104 x 70 x 30 mm
Weight: 255 grams
IP30, metal housing
DIN bracket
Key for USB-B port lock - green
Lock is inserted with this green special key
Other color key cannot release the lock
Key is USBB-LOCK-GN
1 piece. in bag
Colour: green
Material: plastic
Mounting: Desktop or Wall Mount
Construction: Heavy Duty Cold Rolled Steel
Color: Black (Standard), or special colour on requist
Support Micro ATX M/B (120ATXR) (Max. to 9.6" x 9.6")
Drive Capacity: 2x 5.25" CD-ROM & 2x 3.5" FDD &1x 3.5" HDD
Power Supply (Optional): PS/2 Size Single or Mini Redundant ATX P/S (Rear Installation) Max. Depth 190mm
Cooling: 1x (120mm = 90.0CFM ea.) Fan
Front Door: Single Door With 2 Thumbscrews
Air Filter: Inside Front Danel (Washable)
Connector Port (Front): 2x USB Ports (on special request)
Thermal Management Card
Indicators: LEDs for Power ON/OFF, HDD Active, Fan, Temperature
Flexible Hold Down Bar Designed
Switch: Power ON/OFF, System Reset, Buzzer Reset
Dimensions (W x H x D): 400 x 177 x 420mm (15.7" x 7.0" x 16.5")
GW: 15.0 kgs / 33.1lbs
Humidity:55% - 95% Non-condensing
Power supply,DVD, Floppy is not included.
Function LTE-based WAN expansion for various IP networks
Applications Enterprise, surveillance, WiFi hotspots
Dual SIM For ISP fail-over
Web-UI Basic settings, CLI and Command Script for advanced settings
Ethernet Ports 1 configurable WAN & 2x Fast Ethernet
Includes WiFi support
Micro-SD Slot for log storage
Power Input DC 5-18V
Operating Temperature -30°C ~ 70°C
Weight 220g
Dimensions 93x90x27mm
19" TFT-LCD Panel PC
IP65 front
Resolution: 1280*1024
250 nits
5-wire resistive touch screen (capacitive touch on request)
Intel Celeron J4125/J6412 CPU / Core i5 /i7
RAM: 1x SO-DIMM DDR4 (celeron) max 16 GB, i5/i7 2x SO-DIMM DDR4 max 32 GB
1 x M.2 2242/2260/2280 SATA
1 x SATA (2.5'' SATA)
1 x M.2 2280 NVME
MPCIe: M.2 3042/3052 for 3G/4G/5G with built-in SIM slot, M.2 2230 WiFi & BT
2x RJ45 Intel i225V (on special request 2 more can be added)
USB: Celeron version: 4*USB2.0+2*USB3.0 (J4125/J6412), i5/i7 version 4*USB3.0+2*USB2.0
COM: 2x DB RS-232/422/485 port, 4*RS232 in expansion port
GPIO: 1* 10 bit GPIO Inside the expansion port
Power supply: 9-36V DC plug
Working temperature: With air flow -10 ~ 60° C
Anti-vibration with SSD: 3 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1 hour/axis
Anti-shock with SSD: 30 G, IEC 60068-2-27, half sine, 11 ms duration
437.27x361.27x68.8mm
OS Support: Windows 10 / Ubuntu, CentOS
Global 4G LTE Controller, logger and alarm
Supports all LTE frequencies
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital "dry contacts". High on contact
2 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 logs
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm to 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - additional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C
GSM/LTE alarm - 4G - Global version
Supports all LTE frequencies
Configuration via USB (Windows program) or SMS
2 x digital inputs with "dry contact" or "logic level" mode
2 x analog inputs from 0 to 60VDC, 10 bits
2 x relay outputs with NO/NC contacts
1-Wire interface for 4 Teracom temperature and humidity sensors
Input can be navigated with alarm text etc.
SMS alarm - up to 5 numbers
Email alert - up to 5 email recipients, SMTP with TLS support
1 relay can be activated with calls from up to 100 phone numbers
Push mode – XML data is sent via HTTP Post to a remote server. Response from server may contain relay setup.
MQTT 3.1.1 support
Firmware update "over the air"
Supply voltage: 10 - 28VDC, 2Watt - optional PSU
Dimensions: 109 x 65 x 32 mm
Weight: 152g
Door switch for access control - EXIT button.
End contact by pressure
Contact: NO/NC/COM
Max. 36VDC 3Amp
Cast aluminum body, steel button
12VDC LED supply
Operating temperature: -20 - +50°C
Dimensions: 80 x 30 x 24 mm
Gold plated SMA adapter.
Round + hole to round + hole
Gold plated antenna cable adapter
Flange + hole for external thread + pin
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to work
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 Mm
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to function
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 mm
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to function
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 mm
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to function
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 mm
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to function
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 mm
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to function
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 mm
