Passive bus card with 12x PCI, 1x ISA and 2x PICMG

Passive bus card with 1 x PICMG1.3, 4 x PCI, 5 x PCIexpress

Max. 1920 x 1200 pixels
1 x KVM Extender Console Unit - Remote module
1 x KVM Extender Computer Unit - Local module
1 x 12V DC Power supply included for remote module
1 x KVM cable ( VGA)
USB (2 on Console Unit, 2 on PC Unit)
Only VGA and USB Mouse / Keyboard Transfer
Does Not Transmit Touch from Monitor
USB is only for mouse and keyboard
For point RJ45 network cable up to 200 meters
with Edid Emulation
2 controls for the same PC
Video adjustment

Icron USB Extension - Local Extender device and Remote Extender device
USB 2.0: Up to 480Mbps
USB 1.1: Up to 12Mbps
1 x USB-B (LEX unit)
1 x RJ45 (LEX unit) to 4 x USB-A (REX device)
1 x RJ45 (REX device)
Dimensions: 100mm x 76mm x 26mm
up to 600mA to each USB port (REX device)
Up to 100 meters above the UTP / STP to 4 x USB - version: USB 1.1 and 2.0
5VDC / 3A PSU (REX device)
Operating temperature: 0 ° C to 50 ° C,

RESTSALG

Icron USB Extension - LOCAL and remote unit
Up to 100 meters over UTP / STP
2 x USB port - Version: USB 1.1 and 2.0
24VDC / 1A PSU incl. the remote unit
PSU kan be connected two LOCAL or remote unit
Support up to 11 USB units from 3 USB Hubs

Icron USB Extension - with LOCAL and remote unit
Up to 100 meters over UTP / STP Cat 5e / 6/7
USB version: USB 1.1 and 2.0
24VDC / 1A PSU incl. the remote unit
Support up to 11 USB devices from three USB Hubs

Extends serial cables up to 1600 meters or printer cables up to 180 meters.

PS / 2, CATx extender - extension
Pull a PS / 2 signal up to 100 meters over a CAT5 / 5e / 6/7 UTP network cable
Consists of a transmitter module and a receiver module
Passive, requires no power
Receiver: 2 x PS / 2 and 1 x RJ45 connectors
Transmitter: 2 x PS / 2 and 1 x RJ45 connectors

Active HDMI Extender to mount between 2 pcs. HDMI cable
Transfer HDMI signal up to 40 meters.
Max length HDMI cable is 20m.
Powered from the HDMI source (5VDC in the plug)

DVI-D Extender with local and remote module up to 50 meters.
Extend DVI-D up to 50 meters via Cat. 6 RJ45 cable
Both units are with DVI-D male
Do not connect network switch
With built-in EDID (emulates monitor)
Power is supplied with 5VDC from the DVI connector on the PC
Can be powered with 5VDC USB Micro
Power consumption at 5VDC is approx. 350mA
External power supply: Purchase additional DC5V with USB A female connector

Sender and receiver for the transfer of DVI signal up to 1.2 km via fiber optics
SC Multi Mode fiber cable PC and monitor
Also transmits audio signals to microphone and speaker
REMAINING STOCK - limited quantity

BNC male to RCA / phono Female Adapter

BNC SDI male to RCA / phono RCA Female Adapter

BNC male connector extends through the two screw clamps.

BNC HD SDI female RCA / phono male Adapter

BNC-ASSEMBLY is a BNC pass-through with 2. BNC socket. For the assembly of RG58 / 59 or RG62 cable.

Bluetooth from PC to the adapter provides RS232 port
External antenna.
Bluetooth 2.0.
With 2 pcs. as back-to-back link
provides connection between 2 COM ports
Wireless transfer of data between serial ports
Up to 100 meters
Antenna connector is RSMA female
Setup via AT commands
Must be powered from 5 - 40VDC via screw terminal
USB mini cable to A male - for power from 5VDC
2 x screw terminal for any external power supply
Is not battery-powered
Use Putty for testing/setup
Help with setup can be purchased additionally

1D wireless barcode scanner with USB RF dongle
wireless row side is typically 30 meters
built-in memory for approx. 400 scans
Supports all common 1D barcodes
Radio Technology: Zigbee

Standard Cell m / M8 x 1,25 Anslutningsgänga; Full belastning = 50 kg

The standard load cell m / M8 x 1.25 thread
S-beam type
Full Load = 5 kg
Maximum load: 7.5kg