DANBIT has a wide range of products. Below you will find a lot of our main categories with categories below them. Since DANBIT's founding in 1970, our product range has expanded significantly. From focusing solely on electronic measurement, we currently have over 8,000 different products. This means that we can better meet your needs. If the task is to be tailored, we can, in cooperation with our close suppliers, find out exactly the product you need to solve your task.
Reading of license plates with the speed of 0-200 km / h
can register license plates for up to four lanes to 5-Megapixel resolution at 30 fps
Built-in infrared white LED (approximately 60 meters)
RJ45 gigabit port
Sound alarm
ONVIF support
Motion detection
WDR
Micro SD
PoE
12VDC / 24VAC
Extended operating temperature -40 - 60 °
Modul til detektering af vekselspænding - 85 - 250VAC
Threshold +/-8 VAC
Galvanisk isolation mellem AC og digital output Open Collector
2 niveauer med jumper
Lav temperaturdirft
Strømforsynes fra AC siden
Combi sensor for temperature and humidity measurement
Modbus RTU
2 x RJ45 connectors - with daisy chain to next module
RS485 Bus to Controller.
Up to 32 devices can be connected to the Controller
3.0% relative humidity measurement accuracy
12 bit resolution for moisture measurement
14 bit resolution for temperature measurement
With mounting flanges
Excellent long-term stability
Each module has its own ID code
Temperature sensor TST300V2 with RS485 interface
±0.13°C accuracy from -20°C to +60°C
14-bit resolution
2 x RJ45 for daisy chain connection to next sensor
IP20 sealed enclosure
Low power consumption
Modbus address table: see TST300 manual
Log in to danbit.dk and press DOWNLOADS
MODBUS RTU interface
1-wire barometrisk trykmåler, 2 x RJ11 til daisy chain
Relativ præcision på 0.12hPa
Høj elektromagnetisk (EMC) immunitet
Høj linearitet og nøjagtighed
Nem installation
Eksellent langtids stabilitet
Hver enhed har egen unik 64 bit serienummer
0-20mA 4-20mA Transmitter for 1-wire output
2 x RJ11 for daisy chaining
10-bit resolution
0-20mA and 4-20mA, 0.01mA resolution (+/-2%)
Galvanic isolation
IP30 tight
Good long-term stability
Each device has a unique 64 bit serial number
Steel Reinforced fiber cable
multimode
4 core
4 x LC at each end
50 / 125my
Robust sheath
black
Cable Thickness: 9 mm
150m
Discount on the purchase of large quantities
Steel Reinforced fiber cable
Multimode
Duplex
4 x LC connector at each end
50 / 125my
Robust sheath
black
Kabeltykelse: 9 mm
50m
Discount on the purchase of large quantities
1-wire current meter 0.3 to 15 Amp
For AC or DC current monitoring
Galvanically isolated
![Transmitter for PT100 temperature sensor - [TST200] ⇒ From -200 to + 850°C Teracom TST200](https://www.danbit.dk/10332-medium_default/1-wire-transmitter-for-pt100-temperature-sensor-2-3-4-wire-sensor-200-850c-cascade-coupling.jpg)
1-wire communication - 2 x RJ11 connectors for daisy chain connection
2 - 3 - 4 wire Pt100 temperature sensor - 4 wire is recommended.
Built-in A/D converter with compensation
24 bit resolution for temperature measurement
Calibrated digital output
Excellent long-term stability
Each sensor has its own unique 64 bit serial number
1-wire communication - 2 x RJ11 connectors for daisy chain coupling.
± 3.0% relative humidity accuracy.
12 bit resolution for the moisture measurement.
14 bit resolution for temperature measurement.
calibrated digital output.
Eksellent long term stability.
Each sensor has its own unique 64-bit serial number.
1-wire communications - several sensors can be connected to the same unit
± 3.0% relative humidity accuracy
± 0.4% relative temperature accuracy
12 bit resolution for humidity measurement
14 bit resolution for temperature measurement
Calibrated digital output
Eksellent long-term stability
Each sensor has its own unique 64-bit serial number
Temperature sensor with Dallas chip - up to 8 pieces on the same bus
1-wire communication to the measuring electronics
With connector for cascade coupling to the next sensor
±0.5°C accuracy from -40°C to +85°C
12 bit resolution
Temperature sensor in the box
Very low power consumption
Each device has a unique 64 bit serial number
Temperature sensor with Dallas chip - up to 8 pieces on the same bus
1-wire communication to the measuring electronics
± 0.5 ° C accuracy from -10 ° C to + 85 ° C
12 bit resolution
Aluminum head provides low thermal resistance
IP65 close
Very low power consumption
Each unit has a unique 64 bit serial number
4K resolution
HDMI 1.4
Ethernet
ARC (Audio return channel)
28.30 and 24 AWG
3D
1 meter
Discount on purchase of larger quantities
Data logger for external temperature and humidity sensors
Sensors are not included - must be purchased separately, see selection
Memory for 70,000 measurements
Temperature, humidity and dew point can be displayed graphically
1-Wire and RS485 sensor interface
Up to 8 Teracom sensors can be connected
MODBUS TCP/IP support
SNMP v2 with trap alarm for 5 email recipients
Secure email
XML/JSON and HTTP API commands for client-server
Dynamic DNS, DynDNS, No-IP and DNS-O-Matic
NTP support for time synchronization
Remote firmware update
Supply voltage: 10 - 32VDC - purchase PSU
Web based Data Collector module with built-in WebServer
4 x digital input Dry - external contact without voltage
4 x analog inputs with 0 to 60VDC - 10mV resolution
Multiply and offset for analog inputs and sensors
1-Wire for max. 8 sensors (16 parameters)
4 x powerful relay outputs with NO/NC contacts
MODBUS TCP/IP support
SNMP v2 support with trap alarm for 5 recipients
4 schemes for real-time control of relays
Specific logic functions for relays
Secure email
XML/JSON and HTTP API commands for client-server
Dynamic DNS support for DynDNS, No-IP and DNS-O-Matic
NTP time sync
Supply voltage: 10 - 28VDC - purchase PSU
Dimensions: 145 x 90 x 40 mm
Stand-alone Data logger via Ethernet
Memory for 70,000 measurements
Can be programmed to log every 3 seconds
Password protected Web based configuration and control
2 x digital input "dry contact"
2 x analog inputs 0 to 10VDC, 10-bit resolution, 10mV display
Multiply and offset for analog input
2 x relay with NO/NC contacts
1-Wire interface for 8 sensors
SNMP v.2 support
SNMP traps up to 5 alarm types
MODBUS TCP/IP support
E-mail to 5 recipients in case of conditional alarm
HTTP API commands
NTP and dynamic DNS support
Remote firmware update
Supply voltage: 10 - 32VDC - purchase PSU
Module with password protected Web based configuration and control
1 x digital input with "dry contact" or "logic level" mode (max. 5.5VDC)
8 x relay outputs with NO/NC contacts (3Amp)
SNMP v.1 support
SNMP traps conditional alarm sending
Email transmission upon alarm
SMTP with authentication (SSL/TLS is not supported)
XML and HTTP API commands
Remote firmware update
Robust DIN-Rail/wall mounting.
Supply voltage: 10 - 14VDC
Module with password protected Web based configuration
2 x digital inputs with "dry contact" and "logic level" mode
2 x relay outputs with NO/NC contacts
With Pair between 2 modules over network with input to output
Encrypted communication
Manual or DHCP network configuration
Device ID filtering
Remote FTP firmware update.
Supply voltage: 10 - 14VDC
