DANBIT has a wide range of products. Below you will find a lot of our main categories with categories below them. Since DANBIT's founding in 1970, our product range has expanded significantly. From focusing solely on electronic measurement, we currently have over 8,000 different products. This means that we can better meet your needs. If the task is to be tailored, we can, in cooperation with our close suppliers, find out exactly the product you need to solve your task.
Electric door lock that is open without voltage.
Holding force 1000 KG
supply: 12 / 24V DC 130 / 65mA when activated
Suitable for Scandinavian types
Operating temperature: -20 ° C to + 40 ° C
Multi voltage 12-24V AC / DC
approved for use in fire-resistant doors E120 / A120 / EI120
Fail secure (PTO): SL 620
Fail safe (PTL): SL 621
Latch bolt adjustable left / right
Built in "By status" sensor
Status monitoring: latch, anti-thrust bolt live handle
Mechanical key override
PCI Express card with 96 TTL I/O channels and 3 counters
X1 PCI Express interface
96-CH digital TTL/DTL inputs/outputs
Emulates 4/2/1 industry standard 8255 PPI (mode 0)
Direct interface with OPTO-22 compatible I/O modules
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
Support Windows 7/8 X64/X86 and Windows 2008 R2
3½” floppy to floppy drive
Formatted to 1.44 MB
The price is per. 1 piece. floppy disk
Get a quote if they need to be formatted to 720kB
Supports a 32-bit 5 V PCI Express bus
24/48/96-CH digital TTL/DTL inputs/outputs
Emulates 2 industry standard 8255 PPI (mode 0)
Support Windows 7/8 X64/X86 and Windows 2008 R2
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
12V and 5V power supply to OPTO-22 (Direct interface with OPTO-22)
Mouse / keyboard adapter that emulates both USB to PS / 2 ports
PS / 2 Mouse Keyboard to USB Adapter
250 VAC relæ til DIN skinne
230VAC to 9VDC / 0.3A
Linear - not regulated
DC plug 3.5 / 1.3mm
230 VAC, 9VDC, 0,2 A, ikke reguleret, type A, 1,3/3,5 mm
AC / DC power supply for DIN rail mounting
5VDC, 25W
Max. 5A
Screw Terminal
Adjustable Output Voltage 4.5 V to 6.2 V
Working Temperature: -20 ° C - + 50 ° C
Switch mode type
100 - 240VAC to & nbsp; 5 VDC, 2 A
DC plug: 5.5 / 2.1mm
Switch mode type
100-240 VAC to 5VDC / 4 A
DC plug. 5.5 / 2.5mm
Switch mode type
5VDC 2A mains adapter
DC plug. 3.5/1.35mm
AC / DC power supply for DIN rail mounting for 48VDC, 96W
Max. 2.5A
Screw Terminal
Adjustable Output Voltage 43.2 to 52.8 V
Working Temperature: -20 ° C - + 50 ° C
180 - 550 VAC input for 24-28VDC fine adjustment
120 W voltage supply
DIN rail mounting
Adjustable output 24 to 28VDC
Working temperature -30 - + 70 ° C
Robust power supply, adjustable from 12-15VDC / 10AMB
for DIN mount
input 180-550VAC
output: 12VDC10 A (120W)
Contact output by power error
Screw terminal
Dim: 130 x 125 x 40mm (H x D x B)
operating temperature: -25 ° C - + 70 ° C
Power supply 100 - 240VAC to 12 VDC / 5A, switch mode. 2.5mm / 5.5mm Jack
Power cord included.
Switch mode type
110-240 VAC for & nbsp; 12VDC / 3A
DC connector: 5.5 / 2.1 mm
Net adapter 12V, 1A - Switch mode
Output: 12VDC / 1Amp
230VAC input
Power plug: 5.5 / 2.5 mm
Cable color: + Red, - White
Mains adapter - switch mode type
110-240 VAC to 12VDC/1.5A
DC plug: 5.5/2.1 mm
1 meter cable
19" Rack power supply with 16 12 volt outlets
Output current per port: 0.5Amp
Total power consumption: 8 Amps (96 Watts)
Fuseless current limiter per port max. 1.1Amp
Built-in PTC as short-circuit protection
120 - 230VAC input
Screw terminals
Dimensions: 437 x 170 x 44 mm
Weight: 2.6kg
Operating temperature: -10 - +45°C
Power Jack male connector 5.5/2.1mm screw terminal block.
Connects loose wires.
18 - 36VDC DC / DC converter to 5VDC
Large DC voltage DC / DC converter
5VDC 2A
Working temperature -25- + 70 ° C
18-36VDC DC / DC converter for 24VDC
Insulated DC / DC converter with large voltage range
DIN mounting
