Pc industrikabinet til Micro ATX
Industri pc kabinet til bord- og vægmontage
2,900.00 kr
Item number S-WALL4M-ATX
DANBIT has a wide range of products. Below you will find a lot of our main categories with categories below them. Since DANBIT's founding in 1970, our product range has expanded significantly. From focusing solely on electronic measurement, we currently have over 8,000 different products. This means that we can better meet your needs. If the task is to be tailored, we can, in cooperation with our close suppliers, find out exactly the product you need to solve your task.
Pc industrikabinet til Micro ATX
Industri pc kabinet til bord- og vægmontage
4U pc kabinet til vægmontage
Industrikabinet til ATX-bundkort eller fuldlængde CPU kort
3 compartments Telescopic rails for mounting the cabinet in a rack cabinet, a set of telescopic rails 1U, black movable angles of 2U
Screws/nut drivers included
2U Angle 1: 100 mm
2U Angle 2: 300 mm
1U udtræksskuffe til KEY-MINI-TOUCH
Leveres uden tastatur
Teleskopskinner til montering af kabinet i rackskab, Et sæt teleskopskinner i aluminium, 2U Kan benyttes til alle U højder
Patch panel for 24 x RJ45 shielded
For networking between Server, workstations and WAN
RJ45 pass-through connector for mounting cables on both the front and back
Cables are installed without the use of tools
Cable holder for 19 "rack cabinet, black
19" Sort patchpanel til 16 x RJ45, Cat 5e, UTP
Shelf for fixed mounting in 19 "rack cabinet, 80cm deep, black
Black 19 ”Shelf made of steel
Practical for loose units
430 - 630 x 88 mm (2U) (d x h)
Supplied: Screws, nuts and fittings for mounting in 19" rack cabinet .
Max load: 25kg
Shelf for fixed mounting in 19 "Rack cabinet, black, 2U
Target: 485 x 300 x 88 mm (B x D x H)
max. Loading: 15kg
19" Patchpanel til LC fiber back-bone
Leveres uden LC-stik - skal tilkøbes
LC gennemgangsstik kan være: S-IND19"LC-M eller S-IND19"LC-S
19" Patchpanel til SC fiber back-bone
Leveres uden SC-stik - skal tilkøbes
SC gennemgangsstik kan være: S-IND19"SC-M eller S-IND19"SC-S
19" blind plates for protection
19" blindplader til afdækning
19” 4U ATX kabinet. Til montering i 19” rack, med blæser og udskifteligt støvfilter
19 "4U ATX cabinet
3x 51/4 approach from front
1x 3.5" Approx from front
4 x 3½ "Internal
1x Slim DVD space Front
PS / 2 ATX Place
USB 3.0 Front
room for 7 full height and full-length card
1x 120mm blows in front PWM
12.5kg
563.7 x 430.0 x 176.0 (mm) with front
Power rail for mounting in 19” rack cabinets
8 x C-13 female connectors
Displays current, voltage and power.
Shows total consumption in kWh.
Cannot be reset
Fixed 2m cable for power supply with IEC 60309-2 CEE blue 16A 3-pole male plug (Ø44mm)
Strømskinne med 8 EDB-stik til rack mount
4 kW power rail for mounting in 19 "rack cabinet
24 X C13 female plug, 16 AMP CEE male connector, 1 facet
113 cm (L) incl. mounting bracket
LCD display shows power, voltage and power as well as total consumption in kWh
Strømskinne med 8 IEC-udtag (apparatstik)
Power rail for mounting in 19" Rack cabinet
mounting brackets can be turned opposite
8 round outlet (with female connector and earth)
mounted with 3 m power cable with computer connector
to 19" rack and wall mounting
Antenna adapter
nut + hole (SMA)
exterior thread + hole (TNC)
SMA adapter
exterior thread + tap
Inside thread + tap
Isoleret RS485 repeater til DIN skinne
REMAINDER SALE
JetCard 1404i 4 x isolated RS422-485
With 2 KV optical isolation
US SUPPORT
Windows 98/Me/NT/2000/XP/2003, Win 7 32bit
Linux RedHat Enterprise 4.0 (2.6.9)/RedHat Enterprise 3.0 (2.4.21)
RedHat 9.0 (2.4.20)/RedHat 8.0 (2.4.18)/RedHat 7.3 (2.4.18)
RedHat 7.2 (2.4.7)/FC5(2.6.16)/FC3(2.6.9)/ FC2(2.6.5)/FC1(2.4.22)
Mandrake 10.1(2.6.8)/Mandrake 9.2 (2.4.22) Regulat
2 x RS232 / 422/485 Ports
PCI version 2.1 (32bit) - 3.3 / 5.0V
RS232: TX, RX, CTS, RTS - Optical ISO
RS422: TXD +/-, RXD + / -, RTS, CTS, GND
RS485: Data + / Data, GND
2 x DB9 male
Up to 921.6Kbps
Built-in Termination: 120 Ohm
DOS, Windows 98, NT , 2000, XP, Win7, Win8, 2003, Linux
2 RS422/485 serielle porte til PCI Express
Waterproof hood with thread and strap
For RJ45WP-10FM
For RJ45WP-20FM
For RJ45WP-60FM
Thread (13/16"-UNEF28)
Cable connector for RJ45 chassis connector
For permanent installation of RJ45 cable in chassis connector.
Used for RJ45 patch cable with plug fitted
IP69K waterproof RJ45 connector for chassis mounting.
Anti-oxidation and anti-UV
Plastic housing: Technical thermoplastic. Fire protection according to UL 94V-0.
Contacts: Phosphor Bronze.
Surface treatment: Gold plating over nickel in contact.
Møttrik: Technical thermoplastic flammability class UL 94V-0
Gasket: silicone
Panel thickness: 1.5 ~ 2.5mm
Chassis connector with built-in RJ45 female connector
20 cm cable with RJ45 male
Provides waterproof connection
Purchase RJ45WP-P cap when not in use.
Thread: (13/16"-UNEF28)
CAT5e and CAT6 (1000BaseT) Ethernet speed
Space and cost saving
IP68 rating
In accordance with IEC/EN 60950-22
Plastic: for anti UV light & UL 94V-0 for low flammability rating
Packing: excellent in tensile strength and elongation ability
10 cm (Special cable length can be ordered when ordering in volume)
Plastic housing: Engineering Thermoplastic, UL 746C (f1 grade)
Contact pins: Phosphor Bronze
Gasket: Silicone, UL50E/UL157 Multiple cable lengths Options RJ45 UTP female connector for chassis mounting.
10 cm UTP cable with RJ45 connector
Acquisition waterproof cap for female connector RJ45WP-P
Waterproof back
Thread: (13/16"-UNEF28)
Waterproof cap for RJ45W chassis connector with bayonet
Waterproof Cable Housing for RJ45 - Fits the RJ45W chassis connector
RJ45 female connector for chassis mounting
Thread: (13/16"-UNEF28)
RJ45 pass-through connector 2 x RJ45 female STP
IP68 tight with waterproof cap attached - RJ45W-P - purchased separately
IP68 tight with waterproof housing with cable attached - RJ45W-S - purchased separately
S Keystone connector for RJ45
Crossed feedthrough
She-She
Grå kapper til RJ45 stik. I poser á 10 stk
Adapter, 4 telefoner på 1 kabel, RJ45 til RJ11
Adapter, 1-til-2 deler med 1 x RJ45 han og 2 x RJ45 hunstik
Adapter, 1-til-2 deler med 1 x RJ11 han og 2 x RJ11 hunstik
Passive 865 MHz RFID PVC tag (860 - 960MHz)
0 - 10m depending on antenna gain
ISO short format 86 x 54 x 2 mm - card holder available
Protocol: ISO 18000-6C (R / W)
Card ID in other sector.
Operating temperature: -25 ℃ ~ + 65 ℃
Passiv 865 MHz RFID holder til RFID865TAG-W