CALL US NOW: +45 56 66 20 20
DANBIT has a wide range of products. Below you will find a lot of our main categories with categories below them. Since DANBIT's founding in 1970, our product range has expanded significantly. From focusing solely on electronic measurement, we currently have over 8,000 different products. This means that we can better meet your needs. If the task is to be tailored, we can, in cooperation with our close suppliers, find out exactly the product you need to solve your task.
DVI-D Extender with local and remote module up to 50 meters.
Extend DVI-D up to 50 meters via Cat. 6 RJ45 cable
Both units are with DVI-D male
Do not connect network switch
With built-in EDID (emulates monitor)
Power is supplied with 5VDC from the DVI connector on the PC
Can be powered with 5VDC USB Micro
Power consumption at 5VDC is approx. 350mA
External power supply: Purchase additional DC5V with USB A female connector
Sender and receiver for the transfer of DVI signal up to 1.2 km via fiber optics
SC Multi Mode fiber cable PC and monitor
Also transmits audio signals to microphone and speaker
REMAINING STOCK - limited quantity
BNC male connector extends through the two screw clamps.
BNC-ASSEMBLY is a BNC pass-through with 2. BNC socket. For the assembly of RG58 / 59 or RG62 cable.
Bluetooth from PC to the adapter provides RS232 port
External antenna.
Bluetooth 2.0.
With 2 pcs. as back-to-back link
provides connection between 2 COM ports
Wireless transfer of data between serial ports
Up to 100 meters
Antenna connector is RSMA female
Setup via AT commands
Must be powered from 5 - 40VDC via screw terminal
USB mini cable to A male - for power from 5VDC
2 x screw terminal for any external power supply
Is not battery-powered
Use Putty for testing/setup
Help with setup can be purchased additionally
1D wireless barcode scanner with USB RF dongle
wireless row side is typically 30 meters
built-in memory for approx. 400 scans
Supports all common 1D barcodes
Radio Technology: Zigbee
Standard Cell m / M8 x 1,25 Anslutningsgänga; Full belastning = 50 kg
The standard load cell m / M8 x 1.25 thread
S-beam type
Full Load = 5 kg
Maximum load: 7.5kg
PLC to DC 12-24V with 12v DC / analog inputs and 8 transistor
GPS-referenced Stratum-1 NTP server
> 10,000 NTP queries per second (approximately 600,000 per minute)
Built-in TCXO (Temperature-Compensated Crystal Oscillator) – ensures continued accuracy in the event of GPS failure
32-channel GPS antenna provides stable reception
Gigabit Ethernet (1GbE) with IPv4 and IPv6
NTP authentication: MD5, SHA1 and SHA256 for high security
Web interface and CLI for configuration and monitoring
RS232 output with timecode
Universal AC/DC power supply
NTP Server - Atomic clock for 19 rack mounting.
Signal from DCF77 in Frankfurt (77.5kHz)
Not recommended in EMC noisy environments.
Rod antenna with 5 meter cable with BNC male
Purchase antenna cable 50 ohm, BNC male/male
Additional purchase BNC-ASSEMBLE
With network port and serial port
1U for rack mounting
Powered from 230VAC.
NTP Server - Atomic clock - radio transmitter in Frankfurt DCF77 signal
77.5kHz receiver. Not recommended in EMC noisy environments
Stand-alone NTP time server
Dynamic IP address from DHCP or manual selection of IP address
Antenna is active ferrite antenna included
LCD display for date and time
Built-in battery back up RTC
Signal strength display
Configuration via Web browser, Windows or Linux tool
Lokal forvarslingslarm til brug til fx olietank med SMS og e-mail
Local forvarslingslarm to use the fx olietank
PLC with 6 analog inputs and 4 relay outputs, DC 12-24V