DANBIT has a wide range of products. Below you will find a lot of our main categories with categories below them. Since DANBIT's founding in 1970, our product range has expanded significantly. From focusing solely on electronic measurement, we currently have over 8,000 different products. This means that we can better meet your needs. If the task is to be tailored, we can, in cooperation with our close suppliers, find out exactly the product you need to solve your task.
The door magnet with holding force up to 363 kg
Rust free steel cabinet full sealed with epoxy and is vandal safe
Voltage for hold: 12VDC or 24VDC, 6 Watt
Switch between 12 and 24VDC
No holding force at no voltage
Operating temperature: -10 to + 55 ° C
Magnet: 216 x 53 x 32 mm
Amaturple plate: 185 x 45 x 14 mm
anti magnetic function
Weight: Approx. 4.5 kg
Door magnet with holding force up to 545 kg
Aluminum House and vandal safe
Supply voltage for holding: 12VDC or 24VDC, 6 Watt
automatic switching between 12 and 24VDC
No holding power at voltageless
Operating temperature: - 10 to + 55 ° C
Magnet: 254 x 67 x 40 mm
Door plate: 185 x 61 x 16 mm
Mounting plate for frame: 254 x 40 x 6 mm
Anti magnetic function
Weight: 4.9 kg
Electronic door magnet for double doors, swing doors etc.
Holding force up to 272 kg for each door
Aluminum housing and vandal-proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Switching between 12 and 24VDC
No holding power when de-energized
With Bond sensor (door closed sensor)
Option: Door status sensor, Re-lock timer
Operating temperature: -10 - 55°C
Double magnet: 500 x 44 x 26 mm
Door panels: 185 x 38 x 12 mm
Double mounting plate: 500 x 26 x 5.5 mm
Weight: approx. 5 kg
Additional access system - see Accessories
Electronic door magnet for double-doors, whop door etc.
Holding power up to 545 kg for each door
Aluminum House and Vandalsproof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6 watts
Automatic switching between 12 and 24VDC
No holding power at voltageless
Operating temperature: -10 - 55 ° C
humidity: 0-95% non-condensing
double magnet: 533 x 71 x 40 mm
Door plates: 185 x 61 x 16 mm
Double mounting plate: 533 x 40 x 8 mm
Weight: approx. 5.6 kg
Buy access system - see accessories
Wall mounted screen fittings, Fixed, Tilt
Max. 25 kg
screen: 13" ~ 29"
Vesa Hole Distances: 75 x 75mm, 100 x 100mm
distance to the wall: 34mm
Tilt angle: -3° ~ 12°
Robust and stable bracket
target: 115 x 34 x 115mm (B x D x H)
Weight: 400g
DisplayPort KVM Extender, 4K, UHD
70 - 100 meters with CAT. 6a patch cable
4 x USB ports on front and rear
4k @ 30Hz, 1080p mm.
Independent two-way audio transmission
Unique two-way USB Slide / Host setting
USB device K/M, USB drive, HDD oa.
HDCP-compatible and Blu-ray
Point-to-point Cable connection
HDbaset 2.0: Good EMI immunity
DIN kit for Teracom devices
2 x Bracket + 4 screws
17" 1280 x 1024 (SXGA) TFT-LCD
True Flat IP65 Compliant Front Panel Protection
Resistive Touch
Intel® Core ™ I3-8145ue Dual Core Processor (4M Cache, op til 3,90 GHz) (Standard)
Intel® Core ™ I5-8365 quad Core Processor (6M cache, op til 4,10 GHz) (option)
2x DDR4 SO-DIMM Socket, Supports Up to 2400MHz, 64GB
Integrated USB 3.2 Gen 2 supports up to 10Gbps
M.2 E Key Socket for Wireless Module or Intel CRF Module
Supports Ignition Sensing Function (IGN) (optional)
Supports 2x PoE+ Function (optional)
Designed with Rugged Aluminum Die-casting Front Bezel
Supports Panel/VESA/Rack Mounting
9~48VDC via 3-pin Terminal Block
Outdoor 19" rack cabinet of 15 units
Double wall with 10 mm insulation
Option: 2 x Blower module with digital temperature gauge
External dimensions: 840x600x600 (H x BXD)
Maximum depth of equipment: 400 mm
The cabinet is delivered assembled.
RACK CABINETS ARE SENT BY CARRIER
POE power supply via Ethernet cable, up to 30 watt
LAN without PoE in, gives LAN with PoE out
Poe +, 56VDC / 30W
10/100/1000Mbit network.
Power supplies from 12 -48VDC / 32W Max
Redundant Power Input via Terminal Block
Power supply not included
Dim: 135 x 87 x 32 mm
Operating temperature: -40 ~ +75°C
Handheld 7-digit LCD screen
4 Wire Full Bridge input
with Peak, Trough, Net, Overload and Shunt Cal Indication
Battery operation of 450 hours in power saving mode
Keys for ON / OFF , Interval Selection, Peak / Valley Hold and Gross / Net
Single Calibration (Direct mV/V) with double range for values such as kg and lb
Weighing only 250 grams
IP65 / NEMA4
TEDs Enabled to automatic Sensor calibration (IEEE1451 - Template 33)
Buy Leather case
Battery: 2 x AA
Managed 10/100/1000Mbit Robust Industrial Switch
Vibration Safe and dust proof
M12 5 Pin Coded connector
with automatic Bypass for next switch if failure
IEEE 1588v2 Precision Time Protocol (PTP)
PTP is time synchronization in infrastructure
Modbus TCP/IP to SCADA
SMTP / SNMP Trap - generates Email Alarm
IGMP and MLD Snooping for Multicast
VLAN Routing (Layer 3)
CyperSecurity Minimizes safety risk / attacks
Redundant Ring, Fast Recovery
Supply voltage: 9 - 48VDC Redundant Input
Dim: 245 x 140 x 25 mm
Operating temperature: -40 - +75°C
DIN bracket , wall bracket
Weight: 1kg
UTP Cat. 6 network cable, patch cable with RJ45 connectors
unsuccessful and with straight leaders
UV resistant, for outdoor use
Operating temperature: -40 ~ + 75 ° C
Material: Cu (copper)
AWG24
negotiable in many colors and lengths
Mix HDMI video from 2 sources of 1 screen
PIP image in image
PBP image in picture
Screen layout (lock) function
Multi-format 2 in 1 out-switch
2-channel HDMI Video Swappable
Scales Resolution Up or Down
Up to 4K UHD (3840 x 2160 @ 30Hz, 4: 4: 4)
Audio out as Analog and Toslink SPDIF
Supports more than 40 Presets
Complete Video Control of Brightness, Contrast, Saturation, Tint, etc
OSD / IR / Button / Serial Interface
HDCP Compatible, 3D Video and Blu-Ray
Plug-N Play - System, No Software Installation
Supply: 12VDC
2 x PCIE X16 Slots for full length GPU cards
1 x PCIE X4 Slot and 1 x PCIE X1 Slot for add-on cards
Intelligent cooling Design for high-performance GPU cards
Military Standard Shock Vibration Resistant
Output 24VDC at 42A (1000W)
Input 90VAC - 305VAC
Input-output by terminal block
Remote ON/OFF and DC OK signal
Dimensions 140x41x290mm
Supports 9th/8th Gen Intel® Xeon®/Core ™ processor (35W/65W/80W)
Nvidia / AMD GPU Support up to 328mm
Intel Gen. 8/9, C246 Chipset
2 x DDR4 SO-DIMM, supports ECC/non ECC type up to 2666 MHz, 64GB
4 X 2.5" Hot Swappable SATA III HDD/SSD BAYS (MAX HEIGHT 15 mm)
1 x M.2 m Key operation (NVME), 1 x M.2 E key (CNVI)
VGA, HDMI, DP
6x USB, 1x UBS internal
2 x RS232/422/485
2 x Front Available SIM card slot for signal redundancy
Power 9~48Vdc, 220W
Dimensions 105x190x360mm (wxDxH)
Operating temperature -40°C to 70°C depending on CPU
9~48VDC via 3-pin Terminal Block
Optional AC/DC or DC/DC 24V 480W Power Supply
Optional AC/DC or DC/DC 24V 1000W Power Supply
Converting cable from CRC9 to N
Suitable for connection of external antenna for router
RG174, 50 Ohm
100dB per 100meter at 2GHz
CRC9 male
N male
5 meter
Converting cable from CRC9 to N
Suitable for connection of external antenna for router
RG174, 50 Ohm
100dB per 100meter at 2GHz
CRC9 male
N male
2 meters
Expansion module for X-400, X-600 Controller
with Daisy Chain for several I/O modules
16 x Dry Spst Form c relay - Signal relay
Relays can be grouped in common
Activation of Relays Can switch individual
16 x digital input - optoisolated, 4 - 28VDC
4 x analog inputs - 12bit, 0 - 5VDC, common gnd
LED Indication - Relay and DI status
Supply voltage: 9 - 28VDC ( Preferably 24VDC)
Dim: 219 x 126 x 50 mm
Weight: 342g
DIN mount
