DANBIT has a wide range of products. Below you will find a lot of our main categories with categories below them. Since DANBIT's founding in 1970, our product range has expanded significantly. From focusing solely on electronic measurement, we currently have over 8,000 different products. This means that we can better meet your needs. If the task is to be tailored, we can, in cooperation with our close suppliers, find out exactly the product you need to solve your task.
15.6 TFT LCD with LED Backlight
High brightness 1200 nits, sunlight readable
Resolution: 1920x1080, aspect ratio 16:9 FHD resolution
MTBF: 100,000 hours
Viewing angle: 170° horizontal and vertical
Color contrast: 1200:1
Response time: 25ms
Supports HDMI, DVI-I and DP video interface
Mounting: VESA 75x75
Color saturation: 82% NTSC
Temperature range: -30°C to 70°C
Low power consumption, DC 12V input
2½" 160GB
Rotational Speed 5400 RPM
Rotation Time 11.11 ms
Average Rotational Latency 5.56 ms
Disk Interface Ultra-ATA/100
Resolution up to 1080p@60Hz.
Signal extension up to 50M over CAT5e cable.
No external power required at RX unit under a distance of 30M.
Resolution up to 1080p@60Hz.
Transmission distance up to 40M at 1080p over CAT5e; 45M over CAT6.
No power is required for the receiver unit.
Built-in HDMI male connector to directly plug in an HDMI device.
Supports EDID Management to adjust and restore resolutions.
Supports LPCM 5.1.
When the distance exceeds 30M, using CAT6 cable is recommended.
IC/RFID/MAGNET motor card reader
USB interface
3 in one card reader
Automatic card operation from 2 sides
For example, parking lots, payment terminals, kiosks, etc.
4 PIN PSU interface
Intel® Celeron® J6412, Quad-core, clock speed 2.00 GHz, up to 2.60GHz, TDP 10W
processor IP67 Full Fanless Solution
Memory: 4GB RAM Max. Capacity 32GB
Storage: 128GB SSD
1 x HDMI
2 x USB
2 x Ethernet Intel I225-V GBE LAN Chip (RJ45, 10/100/1000 Mbps)
Security support TPM 2.0 onboard IC
Built-In WiFi, Bluetooth
-10℃~+55℃
Power 12V DC
Without OS: wupport Windows 10/11
Voltage supplier: C14 he (IEC plug)
Power Receptacle: C13 female (IEC connector)
250V (AC)
Approvals: CE, WEEE
0.5m length
Playing photo, video and music files
1 x HDMI output 3840*2160 (4K)
1 x CVBS output (composite video )
Autoplay feature
Select playback with 6 x push button
Connection option for up to 6 buttons (included)
Playback: Storage media: SD (HC) or USB stick (not included)
Connection to motion sensor (not included)
Power consumption 12V/1.5A
1x RS232 to control the media player
1 x Remote control
AAA batteries for remote control not included
Hard copy manual included
RS-485 interface
DCON, Modbus RTU, Modbus ASCII
4 x Analog inputs (+/- 20 mA, 0 ~ 20 mA, 4 ~ 20 mA)
DIN rail / wall mounting
Dimensions 52 x 98 x 27
10 ~ 30 VDC supply voltage
-25 to + 75°C operating temperature
14/13/12th Gen Intel® Core™ Series 65W max
2x DDR5 4800 MHz SO-DIMM Socket, 64GB max
1x DP, 1x HDMI, 1x VGA
1x MXM 3.1 Type A/B for GPU module
1x 2.5GbE and 1x 1GbE LAN,
1x 20Gbps USB3.2 Gen2 x2, Type C Connector
3x 10Gbps USB3.2 Type A, 4x 5Gbps USB3.2 Type A
4x M.2 NVMe SSD or SATA SSD
Operating temperature -40°C to 70°C
Power Input 9-48 VDC
Dimension 260 x 200 x 85 mm
Support OS: Windows®11, Windows®10, Ubuntu Desktop 22.04 LTS
MIL-STD-810H
Rugged embedded PC for industrial edge AI, machine vision, and deep learning
Supports 12th/13th/14th Gen Intel® Core™ processors (up to 65 W)
Supports up to 96 GB DDR5 memory
Dual or single full-length GPU expansion option with combined 500 W power budget
4× hot-swappable 2.5" SATA bays + multiple M.2 slots
Supports RAID 0 / 1 / 5 / 10
4× 2.5GbE LAN (optional 10GbE), 6x USB 3.2 Gen1x1 , 2x RS-232/422/485
Modular design for scalable I/O with expansion modules (CMI/CFM)
Temperature operation: –40 °C to 70 °C (depending on CPU config)
Power input: 9 - 48VDC
Os support: Windows 10/11, Ubuntu 22.04 LTS
Certified to MIL-STD-810H and other industrial standards for shock, vibration, and safety
Frequency: 2.4GHz / 5.8GHz
Gain: 9dBi
Connector: N-Male
Material: Fiberglass
Radiation: Omnidirectional
Length: 400mm
Impedance: 50Ω
Polarization: Linear
Beamwidth: H: 360°, V: 100/75° ±3°
IP Rating: IP67 (Waterproof)
Wind Resistance: 60m/s
S.W.R.: ≤2.0
Max Input Power: 50W
Weight: N.W 140g / G.W 230g
Color: Gray
Accepts Apple Pay, Google Pay, MobilePay & manual card entry
Operates on 20–42VDC – ideal for vending and self-service systems
Smartphone-based interface – no physical terminal needed
Supports 6 pulse line configurations for flexible integration
Works via Bluetooth – no internet connection required
Real-time usage & revenue tracking via cloud platform
Perfect for car washes, toilets, coffee & vending machines
Monthly fee is DKK 150/month.
Fee per transaction is 1.5% + DKK 1.80 (standard EU payment cards).
11.6" FHD (1920 x 1080) display
1000 nits brightness
Intel® Core™ i5-1230U CPU
512GB PCIe SSD
Multi-Carrier 5G, 1x Nano SIM card
1x RJ45 10/100/1000 Ethernet
Intel® Wi-Fi 6E AX211 (802.11ax), Bluetooth® V5.3
Main battery: Li-Ion, 7.6V, 4800mAh
1x Thunderbolt, 1x USB 3.2 Gen1 (type A)
Windows® 11 Pro 64-bit
Operating Temperature: - 20°C ~ 60°C
317x215x23.8mm 1.39 kg
IP66 and MIL-STD-810H, MIL-STD-461G certification
Receiver module for HDMI-MULTI4K6-T transmitter
4K60Hz ultra-high quality video transmitter with 60 frames per second
Supports IR extension for video source control
Supports RS232 bidirectional remote expansion
With 4 x USB 2.0 - can transfer Touch
The selectable 64-channel DIP switch for multi-casting group selection
1-to-1, 1-to-many, and multicasting broadcasting architectures
Add more displays without increasing LAN bandwidth load
Supports 4K60 (3840 x 2160) or 1080p HDMI resolution
HDCP compliant
For screen resolutions from XGA, SXGA, UXGA, WSXGA and Full HD to 4K system
Output video rotation
Supports HDMI with 2-channel audio or external audio in and out
Easy installation and administration
Supports USB for KVM PC control
IEEE 802.3af/at PoE+ function supported; no additional power supply required
Supports 802.1X function (future function)
Automatic EDID configuration
Friendly web interface for ease of use
Supports multi-casting group with Gigabit Managed Switch
Switch must have IGMP snooping and Jumbo Frame functions
Transmitter module for HDMI-MULTI4K6-R receiver
4K60Hz ultra-high quality video transmitter with 60 frames per second
Supports IR extension for video source control
Supports RS232 bidirectional remote expansion
With 4 x USB 2.0 - can transfer Touch
The selectable 64-channel DIP switch for multi-casting group selection
1-to-1, 1-to-many, and multicasting broadcasting architectures
Add more displays without increasing LAN bandwidth load
Supports 4K60 (3840 x 2160) or 1080p HDMI resolution
HDCP compliant
For screen resolutions from XGA, SXGA, UXGA, WSXGA and Full HD to 4K system
Output video rotation
Supports HDMI with 2-channel audio or external audio in and out
Easy installation and administration
Supports USB for KVM PC control
IEEE 802.3af/at PoE+ function supported; no additional power supply required
Supports 802.1X function (future function)
Automatic EDID configuration
Friendly web interface for ease of use
Supports multi-casting group with Gigabit Managed Switch
Switch must have IGMP snooping and Jumbo Frame functions
IP Dome Camera
5MP 2880x1620 25/30fps
2.8mm fixed lens
IR light up to 30m
Built-in SD card slot
ONVIF, SDK, CGI
DC12V / PoE
Temperature -30°C to 60°C
Power 2W (IR OFF), Max 4.5 (IR ON)
IP67, IK10
Weight 0.48kg
Intel Atom® Processor D525
2x DDR3 RAM, 2x SATA SSD
15" Resistive Touch
3x RJ45
6x USB2.0
1x VGA
1x RS232, 2x RS485
2x PS2
WinXP/Win7
100-250 VAC, 2,5A input
Around measurement: 38cmx32cmx7cm
Transmits HDMI & KVM over RJ45
Point to point
Up to 50m distance
1080p at 60Hz
Supplied with 12VDC
Power supply included
Powered by NVIDIA® Orin™ NX or Orin™ Nano SoM bundled with JetPack
IP66 waterproof and dustproof
4x PoE+ GbE via M12 X-coded connectors
1x CAN FD
1x RS232 via M12 A-coded connectors
-25°C to 70°C fanless operation (No throttling at 70°C with 20W TDP Mode)
225 x 136 x 55 mm low-profile design
8V to 35V wide-range DC input with built-in ignition power control
Powered by NVIDIA® Orin™ NX or Orin™ Nano SoM with JetPack
IP66 waterproof and dustproof
6x GMSL2 car cameras via FAKRA Z connector (requires camera manufacturers to have dedicated drivers)
(We can offer GMSL camera with driver support)
1x CAN FD
1x RS232 via M12 A-coded connectors
-25°C to 70°C fanless operation (no throttling at 70°C with 20W TDP mode)
225 x 136 x 55 mm low profile design
8V to 35V wide range DC input with built-in ignition current control
Wireless Network Card
M.2 Interface
Up to 1.73 Gbps
Wi-Fi 5 (802.11ac)
Bluetooth 5.1
2x MU-MIMO antennas
Shielded RJ45 loose plug, gold-plated
With passage, for easy assembly and cutting of ends
Max. outer diameter insulated conductor 1.1mm
from 23 to 26AWG cable
For round and flat cables
Use good crimping pliers! see accessories
CAT 6A internet cable, 25m, S/FTP
UL listed and Fluke tested
Suitable for 10 Gigabit Ethernet
Copper conductor
PoE and PoE+ support
LSZH
AWG 26
21.5 Inch Industrial LCD Monitor
1000 Nits Brightness for Sunlight Readability
Full IP67 Waterproof
Operating Temperature Range: -20 to 70°C
Anti-glare Tempered Glass Surface Treatment
UV-resistance material
HDMI, VGA
Power Supply: 9-36V DC
VESA Mounting 100x100, 75x75
CAT 6A internet cable, 10m, S/FTP
UL Approved and Fluke tested
Suitable for 10 Gigabit Ethernet
Copper conductor
PoE and PoE+ support
LSZH
AWG 26
7” LCD with 10-point capacitive touch
High brightness of 1000 nits, suitable for outdoor use
Resolution of 800x480, with a 16:10 aspect ratio and 1000:1 contrast ratio
HDMI, VGA, AV
USB for touch functionality
IP64-rated front panel, ensuring protection against dust and water sprays.
Aluminum housing for enhanced durability
Suitable for demanding industrial applications like smart lockers, medical, and production environments
Operates in temperatures from -20°C to 60°C, with storage temperatures ranging from -30°C to 70°C
Low power consumption (≤8.5W at 12V
Wide input voltage range (12-24V)
High speed CAN FD interface via USB port
10-pin terminal block connector for connection to one CAN interface
ISO 11898-2:2016 CAN specification
ISO 11898-1 for CAN and CAN FD
CAN FD supports both ISO-11898-1:2015
CAN FD data rate of up to 8 Mbps
CAN bus speed up to 1 Mbps
Non-standard baud rates are supported
CAN FD port with +5VDC/100mA current output
CAN 2.0A and CAN 2.0B protocols
Listen mode, Loopback mode
CAN FD interface controlled over COM port using simple ASCII commands
Powered by USB port
Includes a USB A/B cable. Cable length: 90 cm
Windows 7 up to Windows 11, Windows Server and Linux OS
Supports Linux SocketCAN (SLCAN)
CanFestival drivers, CANHacker for analyzing CAN frames
API library of C/C++, C#, VB6, VB.NET, Python and LabVIEW
ABS plastic housing
Adds a high speed RS422 or RS485 serial port by connecting to a USB port
USB Type-C cable, 0,25m
Powered by USB port, no external power adapter required
LEDs indicate TxD and RxD for easy port monitoring and diagnosis
Installs as a standard Windows COM port
Automatic transmit and receive control for 2-wire RS485 half-duplex mode
Serial port protected with surge protection of 15kV
Non-standard baudrates supported
Easy plug and play installation and RS-422/RS485 device connection
High speed serial port with baud rate up to 3Mbps
Provides 15KV ESD protection and 600W surge protection for all serial signals
Supports Windows XP to 11, Server 2000 to Server 2022 (WHQL certified)
Supports Linux Kernel 3.0 and above
Supports Mac OS X 10.3 and above, driver signed by Apple
High speed RS-232 serial port by connecting to a USB Type-C port
USB Type-C cable 0,25m
Powered by USB port, no external power adapter required
LEDs indicate TxD and RxD for easy port monitoring and diagnosis
Installs as a standard Windows COM port
Full RS-232 modem control signals and hardware/software flow control
Serial port protected with 15KV ESD protection
Non-standard baudrates supported
Easy plug and play installation and RS-232 device connection
High speed serial port with baud rate up to 921.6kbps
Supports Windows XP to 11, Server 2000 to Server 2022 (WHQL certified)
Supports Linux Kernel 3.0 and above
Supports Mac OS X 10.3 and above, driver signed by Apple
13.56MHz RFID with Ethernet, Bluetooth, USB type C
Mifare, Desfire UID
Reading distance: 1 - 5cm
USB virtual Com port
Ethernet: TCP Server/client, UDP server/client
Json mode
BT 5.0 BLE/ SPP up to 20 meters
ISO14443A/B, ISO15693
Temp: -10 - + 60°C
Dim: 73 x 71 x 27 mm
Supply: USB type C (5VDC)
Mounting: Desktop or Wall Mount
Construction: Heavy Duty Cold Rolled Electroplated Steel
Color: Black (Standard), (on request Beige or Custom colour and logo)
Support Micro ATX M/B (9.6" x 9.6")
Drive Capacity: 2 x 2.5" Hot Swap trays (interface with SATA)
Power Supply(Optional): 1U Flex ATX (Front Installation) Max. Depth 280mm
Cooling: 2 x 120mm Fans (on the rear side) & 2 x 120mm Fans (on the Top Cover - not included opt.) or 2 x liquid 120mm Fans (on the Top Cover - NOT included opt.l)
2 x 3.0 USB Ports on front
Expansion Slots: 4 slots
Power Switch with LED, System Reset
Dimensions (W x H x D): 325 x 160 x 350mm (12.8" x 6.3" x 13.8")
Humidity: 5% - 95% Non-condensing
Uses 1 unit power suppply, is not included
17" TFT
1280x1024
4:3
Brightnes 250
VGA input
Touch PCT
Panel Mount
Vesa Mount
Available with auto-brightness sensor offers application in day and night
Complete custom design/solution for OEM customers.
0°C ~ 50°C (32°F ~ 122°F)
AC90 to 260V 50/60Hz Auto-sensing
Outdoor wireless access point / bridge
Dual Band 2.4GHz and 5GHz
867 Mbps at 5 GHz & 300 Mbps at 2.4 GHz
Power Input POE 24V Passive
Software controlled PoE output 24V
Operating temperature -40° - 65°
5 GHz antennas not included
2.4 Ghz antennas built-in
Operating system: OpenWRT
Note: OpenWRT is advanced to use
and requires a good understanding of networks.
HDMI Booster up to 40 meters at 4K30
HDMI Booster up to 70 meters at 1080p
No delay - zero laency
HDCP 1.4, HDMI 1.4
Resolution from 800x600 to 3840x2160/24, 25, 30Hz
HDR support
With EDID review
POC - only the transmitter must be supplied with 5VDC (PSU included)
Operating temperature: -20 - +60°C
Dimensions: 75 x 60 x 16.5 mm
Weight: 127g
Supports NVIDIA® Jetson AGX Orin™
1792-core NVIDIA Ampere™ architecture GPU with 56 Tensor Cores
Supports 2 x GbE
Supports 8 GMSL cameras (Can be specially ordered with 4x PoE instead)
2 x RS-232/422/485
5 x USB
16 isolated DI/O (special request, not standard)
2 x isolated CAN Bus
HDMI 2.1, up to 8K@60 Hz
Operating temperature -25°C ~ +70°C (TDP: 30W)
DC 9~48V wide range power input and ignition power control
12.1" LCD 1280 x 800 LED 400 Nits
Intel®Celeron J6412 processor Intel® Elkhart Lake
BISO UEFI
Support DDR4-2666/2933/3200MHz, Max. Capacity 32GB
2 x HDMI
3 x USB 3.0
3 x USB 2.0
2 x LAN
1 x Line-out
1 * M.2 Key-M(NVMe SSD 2280), 1 * M.2 Key-B Slot
Security support TPM 2.0 onboard IC
Standard IP66/IP67 models I/O: 1 x HDMI, 2 x USB, 1 x LAN.
(Needs to be ordered special: connector type: M12 Metal connectors, MIL-38999, MIL-26482 series connectors
-15°C ~ 70°C (5°F ~ 158°F) , 10% ~ 90% (no condensation)
Quad screen segmentation with switch
4 x HDMI inputs 4K30Hz, 1080p/i
1 x HDMI output 4K30Hz, 1080p/60Hz
HDMI 1.4, HDCP1.4 and backwards compatible
Supports audio input
Bandwidth: 330MHz
Max. data rate: 10.2Gbps
In/out TMDS, DDC signal
Temp: -15 - +55°C
Supply voltage: 5VDC PSU included
Dimensions: 148 x 63 x 23 mm
Weight: 206g
Accessories for burglar alarm ALARM-GSM-WKEY
Loud outdoor siren
Volume 110dB
Battery DC15V 200mA
Intel® Celeron® J6412 CPU Elkhart Lake (2.0GHz/2.6GHz)
1 x SDRAM DDR4 3200 MHz (max. 32G)
4 x Gigabit LAN, 1 x Intel I210AT GbE controller, 3 x Intel I226-V 2.5GbE controllers
2 x USB 2.0
2 x USB 3.1
1 x HDMI up to 4096x2160 @ 24 Hz
1 x DP up to 4096 x 2160 @ 60 Hz
SIM slot for 3G/4G
Supports M.2 SSD
M.2 Wi-Fi
1 x MPCIe (PCIe/USB 2.0 signal supported)
1 x E-Key m.2 2230 slot (PCIe/USB2.0 signal supported)
1 x m.2 2242 SSD slot (SATA signal supported
165 x 125 x 45mm (W x HXD)
DC 12-24V, 2-pin phoenix connector
Windows 10, Ubuntu 20.04
DVI KVM extender
Cat.6 (must be of good quality)
Max. 70 meters
1920*1440 at 60Hz
Supports HDbaseT
1 x USB for keyboard
1 x USB for mouse
consists of a transmitter and a receiver
DC5V, mains adapter included
Gain: 8dBi
Direction: Omni-directional
VSWR: < 2.0
Polarization: Linear Vertical
Impedance: 50 ohms
Direction: Omni-directional
Antenna connector: RP-SMA male connector
Net weight: 65g
Operating temperature: -20°С ~ +80°С
Storage temperature: -30°С ~ +85°С
Package: 2 x Antenna with 25 cm cable
NOTE: NOT FOR MPCI-E
