Products

Terminal board with 24 x opto-insulated inputs
1.4 m cable with 2 x IDC50 connectors included
Dimension: 213mm x 132mm

Double terminal board with 2 x 20 screw terminals
2 x 20 pole IDC male connector
For DIN rail mounting
Incl. x 1m flat cable IDC20 female to IDC20 female
148 x 70 mm (W x L)

100 screw terminal terminals
1 x 100 pin SCSI-II connector
For DIN rail mounting
Cable available as an accessory
158 x 120 x 52 mm (B x L x H)

Temperature logger with USB interface and fixed interval.
Disposable meter.
Interval: 20 min.

Temperatur- og fugtlogger med display til USB

REMAINING STOCK

2G GSM

Turn on/off via SMS messages

connected to a power outlet for GSM 2G network

Setup with phone number

Connects to 230vac

Max 10 amps

with Schuko plug

SIM card not included

Vulkaniseringstape/ isoleringsbånd til vandtætte samlinger, 38 mm x 5 meter

Vulkaniseringstape/ isoleringsbånd til vandtætte samlinger, 19 mm x 5 meter

Cable insulation and crimping cable
Cable termination of RJ11, RJ12 and 8 pins RJ45
Cable review tests with LEDs included

Complete BNC/COAX tool set for terminating plugs and cables
The tool kit consists of:
Crimping pliers for 5 types of connectors
Stripping pliers 4" Coax stripping pliers for RG58/59/62/6/3/3csv
Cord cutter 6 ½" cable cuts max. 10.5mm
Screwdriver
236A: RG 55, 58, 59, 62, 140, 141, 142, 210, 223, 303, 400, Fiber Optic, BELDEN 8279
336C: RG6, 59, 62, 140, 210, BELDEN 8279, 55, 58, 141, 142, 223, 303, 400, Fiber Optic
336G: RG 55, 58, 59, 62, 8X, 140, 141, 174, 210, 223, 303, 400, BELDEN 8279, Fiber Optic
336J: RG122, 174, 178, 179, 180, 187, 188, 195, 316, BELDEN 8218, Fiber Optic
336K: RG8, 9, 11, 87A, 149, 165, 174, 179, 187, 188, 213, 214, 216, 225, 316, 393 BELDEN 9913

COAX Reinforcement Rod, Cable Strips
Disposable RG58 / 59/62 COAX Cables and Removes the Exterior Cover
Dimensions 36 x 24 x 109 mm (H x W x D)
Weight approx. 52 grams

50-Ohm BNC T Connector

T-LED for Ethernet and ARCnet cables.
Can be used for analog video

Brug ét sæt mus, tastatur, skærm og højtalere til 8 forskellige pc’er/servere

Connect up to 5 PCs or HDMI sources to 1 monitor
Remote control included
Switching with push button or remote control for HDMI 1.4 and HDCP 1.2
Resolution up to 1080i / 1080p
Power supply included 5VDC / 1.2A

4 port KVM switch, DVI-D, USB
2 port USB 2.0 HUB
Audio is transferred
1920x1200 60Hz DDC2B
Video DynaSync™ - stores the console monitor's EDID (Extended Display Identification Data) to optimize display resolution
EDIT
Cable purchased separately - several lengths
Hot-key / push buttons on the front
5.3V / 10.7W

4-port KVM switch, DisplayPort, USB
2 x USB for mouse and keyboard
2 x USB to USB devices - transparent USB
Resolution up to 2560 x 1600 points
Transmits audio
Push-button Selection and HOTKEY choice of PC
Scan between PCs - choice of time
AC adapter included 12VDC / 1.5A
Can be used as DisplayPort switch - use PSU 
Dimensions: 220 x 130 x 44 mm

2 ports dual head KVM switch med VGA, USB, lyd
2 x VGA - dual head version
Opløsning op til 1920 x 1200 punkter
2 x USB til mus og keyboard
2 x USB til USB-enheder - transparant USB
Hot-key til omskiftning eller trykknapper eller dual-watch scanning
Kan anvendes som VGA omskifter - anvend strømforsyning

2 ports Dual head KVM switch, DVI-D, USB
2 x DVI-D - Dual head version
2 x USB for mouse and keyboard
2 x USB to USB devices - transparent USB < br> Resolution up to 1920 x 1200 pixels
Hot-key switching or front buttons
2-way audio
Cables to be purchased, available in longer lengths
Can act as DVI-D switches - Here is the supplied power supply

2-port KVM switch
1 x DVI 1.0 inch (from each PC)
1 x USB BM 2.0 (from each PC)
3 x USB 2.0 for mouse and keyboard on the control side
Sound in and out
EDID support
Resolution up to 3840x2160 @ 30HZ (NOTE 30HZ!)
Change from button on the front
Cables must be purchased, available in several lengths
Can function as a DVI or USB switch, requires supplied power supply

2 ports KVM switch, HDMI og USB
2 x USB til mus og keyboard
1 x USB til USB-enhed - transparant USB
Opløsning op til 1900 x 1200
Hot-key omskiftning eller med knapper på fronten
Kan anvendes som HDMI omskifter - her skal anvendes 5VDC/1A strømforsyning

With VGA up to 2048x1536 pixels
Switch with Hot Key or button on device
USB device remains folder on PCEN
Keyboard Status (Num-Lock ...) Caches for each PC
Audio Shift, 2x3.5mm Jack)
No need for external bulk supply
has 2 USB ports for mice and keyboard (HID)
Cables 1.5m to 2 PCS included

The 16-port KVM switch with OSD
Resolution up to 1920 x 1440, VGA
16 pcs. combi cables at 1,8m for PCs included
Supports USB and PS2 Mouse and Keyboard
Switching with Hot-key commands
2-way audio
Daisy chain several KVMer up to 136 PCs / Servers < br> Independent of OS16 port KVM switch with OSD

16 ports KVM switch, DVI-D, USB
2 x USB til mus og keyboard
Opløsning op til 1920 x 1200 punkter
Hot-key omskiftning eller fra knapper på fronten
2-vejs lyd
Kabler skal tilkøbes, fås i flere længde

4 ports mechanical switch to the VGA Printing Front-
1 x I / O - VGA female to 4 x A / B / C / D - VGA
she works both ways
recommended only for test use

2 port mechanical switch to VGA
Max. Resolution 2048x1536
Push buttons on front
1 x i/o - vga female
2 x A/B - VGA female
Works both ways
Recommended only for test use
Remember! there is no screen emulation as it is mechanical!

Betjening PCer eller Servere over netværk
Anvender fjernstyringsprotokollen VNC.
Indbygget sikkerhedsfunktioner
Understøtter kun UK, DE og S tegnsæt
Uanhængig af PCernes Operativ System

Montage af 2 stk. RJ45 netværksstik i enderne

Adapter, B hanstik USB2.0

Adapter, A hanstik USB2.0

Adapter, B hanstik USB3.0

Adapter, B hanstik USB3.0

 Adapter, A hanstik USB3.0

R/SMA han, til LLC200-kabelmontage

BNC connector / SDI connectors, RG59, RG58

Unshielded RJ11 connector

Ushielded RJ10 stik

N-type han, til LLC400-kabelmontage

N-type hun, til LLC400-kabelmontage

Adapter, DIN6M hanstik (PS/2), 10 mm, inkl. kappe

Løst SC stik til Pigtail fiberkabler

Løst FC stik til Pigtail fiberkabler

F-type female connector for RCA / phono male connector

Adapter, DIN6M hunstik (PS/2), 10 mm, inkl. kappe

Adapter, DIN5 hanstik, 15 mm, inkl. kappe

Adapter, DIN5 hunstik, 15 mm, inkl. kappe

DB9 male where pins are not fitted yet
RJ11/12 6 pin female with loose wires with pins
Construct your own DB9 to RJ11/12 connections

Configurable DB9 HAN connector
RJ45 connector female to DB9 male

RJ45 pin connections - colors:
1 Blue
2 Orange
3 Black
4 Red
5 Green
6 Yellow
7 Brown
8 White

Adapter, DB9 hanstik, 16 x 8 mm, inkl. kappe

Insert the DB9 female to RJ45 she
RJ45 PIN Assignments - colors:
1 Blue
2 Orange
3 Black
4 Red
5 Green
6 yellow
8 Brown
8 White

Stik med DB9 hun til RJ11 hun