External accessories for PC upgrades or more functions. We have a large selection of hard drives, memory cards, adapters and expansion cards. Here you can buy loose accessories for more specific solutions. See our subcategories to find the right accessories to what you need, otherwise you are more than welcome to contact our sales department.
Subcategories
There are 160 products.
Adapter print with 2 x 40 and 2 x 44 pin IDE jacks. Connect 2½ "HDD to 3½" cable and visa versa. Power cable for 2½ "w / Molex.
Compactflash-kort på SATA-port, till 3 ½ "front mount
Slimline CD og DVD brænder
4GB SLC Industriel flash til SATA, lodret montering
8 GB, 40, Vertical, 27.2 mm
Tilpasningsskinne til 4x 3½" harddiske i et 5¼” slot
1 to 15 duplicator
Standalone, no PC required to operate the duplicator.
Compatible with Compact Flash card, CF1.0, CF2.0, CF3.0, CF4.0, CF4.1, CF5.0, CF6.0.
Peak transfer speeds up to 3.9GB/min. per card slot without reduce in speed.
Supports all types of data copy formats while executing bit-for-bit duplication.
Supports “Quick copy” for Linux (ext2/ext3/ext4), NTFS and FAT16/32.
Supports CFast device. (via adapter)
Can handle the largest CF card capacity on the market.
Standalone SATA harddiskduplikator med USB 3.0
USB 3.0 to eSATA converter
Connect the eSATA disk to the PC's USB port
1 meters kabel til SER8PCI-K+ med 8 x DB9
Industriel USB stick, 4096 MB, IP68 tæt
Stand-alone USB memory stick duplicator
1 master USB stick copied to 31 new USB memory stick
USB flash memory stick copier 1:31
40 pin IDC 3½ "DOM Female to male adapter
In some cases, the pin 20 is removed by USB to IDE
Mobil SD/ Micro SD kortlæser til Smartphones. Transportabel kortlæser OTG (On The Go) til Smartphones
32 GB, 44, Horizontal right, 32.6 mm,
Alle HDD typer lagerføres.
32 GB MLC mSATA Full Size Solid State Drive
1 to 7 duplicator
Standalone, no PC required to operate the duplicator.
Compatible with Compact Flash card, CF1.0, CF2.0, CF3.0, CF4.0, CF4.1, CF5.0, CF6.0.
Peak transfer speeds up to 3.9GB/min. per card slot without reduce in speed.
Supports all types of data copy formats while executing bit-for-bit duplication.
Supports “Quick copy” for Linux (ext2/ext3/ext4), NTFS and FAT16/32.
Supports CFast device. (via adapter)
Can handle the largest CF card capacity on the market.
Hybrid USB for SATA, USB HDD for USB HDD, SATA for SATA Duplicator
1-1 copying
Ultra high speed up to 18GB / min
For SATA SSD, SATA HDD, USB drive, USB -HDD
USB1.1 / USB2.0 / USB3.0 compatible
Capacity up to: USB drive: 2TB, USB-HDD: 2TB, HDD / SSD: 15TB
Stand-alone
Power supply : 12V 5A (included)
Ultra high speed up to 18GB / min
Operating temperature: 5 - 45 ℃
USB floppydrev med 1 x USB 1.1 A han stik
Til 3,5" disketter
Eksternt
Hot Swap
Plug & Play
Forsynes via USB
OS Support Windows 2000/XP/Vista/7/8
Anvendes på PC eller notebook med 1 x ledig USBport
Sort
1 x IDE 40 Pin connector
1 x SATA 7 pin plug (yellow host)
1 x SATA 7 pin plug (black - unit)
1 x 4 pin power connector she
SATA 1.5 GB / s and ultra ATA 133 specification
IDE supporter PIO and UDMA mode Kirke using hard drives
LED indicator for power
No driver or installation required
128GB SSD Disk on Module - Vertical mounted
MLC Flash
SATA III 6GB/s
Sequential Read up to 560 MB/s
Sequential Write up to 345 MB/s
Supply: 5VDC
Available as 32GB / 64GB - Option
Operating temperature: 0 ~ +70 ° C
Available with extended operating temperature: -40 ~ 85 ° C - Option
1x Source port, 9x Target port
Speed of up to 2 GB per minute (33 MB/s) per port
USB 1.1/2.0/3.0 support
Tested with capacities up to 18 TB
Quick Copy: FAT16/32, exFAT, NTFS, Linux (Ext2/Ext3/Ext4), MAC (HFS, HFSX, HFS+)
Dimensions 17 x 25 x 15 cm
SATA drev på IDE controller, konverterprint
Compactflash-kort på SATA-port, med underlagsplattoma
