External accessories for PC upgrades or more functions. We have a large selection of hard drives, memory cards, adapters and expansion cards. Here you can buy loose accessories for more specific solutions. See our subcategories to find the right accessories to what you need, otherwise you are more than welcome to contact our sales department.
Subcategories
There are 160 products.
Alle HDD typer lagerføres.
32 GB MLC mSATA Full Size Solid State Drive
1 to 7 duplicator
Standalone, no PC required to operate the duplicator.
Compatible with Compact Flash card, CF1.0, CF2.0, CF3.0, CF4.0, CF4.1, CF5.0, CF6.0.
Peak transfer speeds up to 3.9GB/min. per card slot without reduce in speed.
Supports all types of data copy formats while executing bit-for-bit duplication.
Supports “Quick copy” for Linux (ext2/ext3/ext4), NTFS and FAT16/32.
Supports CFast device. (via adapter)
Can handle the largest CF card capacity on the market.
Hybrid USB for SATA, USB HDD for USB HDD, SATA for SATA Duplicator
1-1 copying
Ultra high speed up to 18GB / min
For SATA SSD, SATA HDD, USB drive, USB -HDD
USB1.1 / USB2.0 / USB3.0 compatible
Capacity up to: USB drive: 2TB, USB-HDD: 2TB, HDD / SSD: 15TB
Stand-alone
Power supply : 12V 5A (included)
Ultra high speed up to 18GB / min
Operating temperature: 5 - 45 ℃
USB floppydrev med 1 x USB 1.1 A han stik
Til 3,5" disketter
Eksternt
Hot Swap
Plug & Play
Forsynes via USB
OS Support Windows 2000/XP/Vista/7/8
Anvendes på PC eller notebook med 1 x ledig USBport
Sort
1 x IDE 40 Pin connector
1 x SATA 7 pin plug (yellow host)
1 x SATA 7 pin plug (black - unit)
1 x 4 pin power connector she
SATA 1.5 GB / s and ultra ATA 133 specification
IDE supporter PIO and UDMA mode Kirke using hard drives
LED indicator for power
No driver or installation required
128GB SSD Disk on Module - Vertical mounted
MLC Flash
SATA III 6GB/s
Sequential Read up to 560 MB/s
Sequential Write up to 345 MB/s
Supply: 5VDC
Available as 32GB / 64GB - Option
Operating temperature: 0 ~ +70 ° C
Available with extended operating temperature: -40 ~ 85 ° C - Option
1x Source port, 9x Target port
Speed of up to 2 GB per minute (33 MB/s) per port
USB 1.1/2.0/3.0 support
Tested with capacities up to 18 TB
Quick Copy: FAT16/32, exFAT, NTFS, Linux (Ext2/Ext3/Ext4), MAC (HFS, HFSX, HFS+)
Dimensions 17 x 25 x 15 cm
SATA drev på IDE controller, konverterprint
Compactflash-kort på SATA-port, med underlagsplattoma
USB floppy emulator
3½ "floppy drive with USB interface
Up to 1.44 MB of data on each floppy disk
connected as Floppy Drive to 34-Pins FloppyInterface on the motherboard
Each folder on The USB stick is seen as a floppy disk is chosen via buttons on the front
Supports XP
Does not support Win10
1GB, 40pin, vertical, 27.2mm
Antistatic rubber protection to 9 mm high 2½ "hard disk
Supports USB 3.0 and 2.0
Stand-alone hard drive copier for SATA HDD / SSD
Connect the HDD to the USB port and HDDen appear as a removable disk.
For 2½ ", 3 ½" HDD and SSD SATA disks
PC connection on the back: USB 3.0 (female)
Operation: Button held down 2-3 seconds to start cloning disks in Docking station
LED indicates the status of the copying
Accessories: USB cable included
AC adapter: 100-240 VAC, 5 V, 2 A / 12 V, 2 A included
2.5 "SSD hard drive
SATA III 6.0GB / S (Backward Compatible to 3.0gb / s, 1.5GB / s)
TLC
Read speed up to 560 MB / s
Writing speed of up to 495 MB / s
-40 ~ 85 ℃
5V DC
32GB cf card
Available in several sizes
The picture is not the cf card you get!
CompactFlash card interface for PC IDE bus
Suitable for PCs where the CF card is a disk drive
Slimline DVD-ROM, 8x DVD, 24x CD-ROM, kun læser
