REMAINDER SALE
Sending module, VGA via RJ45 to VGA receiver
Connect the PC VGA output to the module's VGA input
Connect local monitor to the module's VGA output
Connect any extra screen for VGA2 output
Connect via RJ45 cable to remote VGA receiver
VGA receiver is VGA-MULTI-MR (max. 4 in stock)
It is possible to connect the 4 VGA receivers in series via RJ45 cable
Transmitter and receiver boxes can be placed up to 900 meters apart, using 2 pcs. VGA-MULTI-MR up to 900 meters, so the same screen can be displayed in up to 8 different places with an 8-port transmitter box. At the same time, the sound is transferred from the PC's sound card. Perfect for e.g. advertising and information boards. The transmitter box has a connection for a local monitor. The units are connected with shielded or unshielded CAT-5 or better network cables, where all 8 conductors are routed through.
Supports copying of EDID, so local monitor can be dispensed with.
REMAINDER SALE
Same screen on up all VGA monitors.
Same screen on 1 remote VGA display
Max. distance between transmitter and receiver is 300 meters
With 3 in series, the maximum distance is 900 meters from PC to remote screen
Rest sales
CSA lens, 6.0 mm, automatic aperture.
Thread: CS
Wide angle: 44.3 ° V.1 / 3 "sensor
Indbygget i en almindelig bevægelsesdetektor af den type, der sidder mange steder
på gange og i kontorer, lagerrum m.v.
PS/2 eller USB signal kabel, 5M
For console with PS/2 or combo-free KVM switch, PS/2 and combo-free KVM switch connect to system use
Console / KVM switch connector: 1 x HDDB-15 pin (Male type)
System connectors: 1 x VGA HDDB-15 pin, 2 x PS/2 Mini Din 6 pin (All Male type) or 1 x VGA HDDB-15 pin,
1 x USB (All Male type)
