Mini UPS 12VDC, 25W, 2.1A, 2600mAh, DC Male Jack, OD 4mm, ID 1.7mm
Mini UPS 12VDC, 25Watt
Battery Capacity 2600mAh
DC Male Jack, OD 4MM, ID 1.7mm
Dimensions: 68mm x 42mm x 74mm
Weight: 280g
Here you will find a large selection of b.la. Power Supplies, PSU and UPS. At Danbit offer power supplies for virtually all needs, everything from a standard PC power supply to a 12 volt power supply or ATX. Our staff has extensive knowledge and expertise in various installations including power supplies.
As a special offer Danbit laboratoie power. Power supplies that are ideal for test use and laboratory setups. See this...
Here you will find a large selection of b.la. Power Supplies, PSU and UPS. At Danbit offer power supplies for virtually all needs, everything from a standard PC power supply to a 12 volt power supply or ATX. Our staff has extensive knowledge and expertise in various installations including power supplies.
As a special offer Danbit laboratoie power. Power supplies that are ideal for test use and laboratory setups. See this category below. Should you be left with unresolved questions please contact us today.
Subcategories
There are 183 products.
Mini UPS 12VDC, 25Watt
Battery Capacity 2600mAh
DC Male Jack, OD 4MM, ID 1.7mm
Dimensions: 68mm x 42mm x 74mm
Weight: 280g
AC / DC power supply for your rail Mounting
AC Input: 180 - 500VAC
Effect: 60W
Output voltage: 12V / 5A
Screw terminal
Adjustable output voltage for 10.8 to 13.2v
Working temperature: -30 - + 85 ° C
target: 125 x 102 x 32 mm (H, D, B)
AC / DC power supply for your rail mounting
AC Input: 180 - 500VAC
Effect: 60W
Output voltage: 48V / 1.25A
Screw terminal
Adjustable output voltage for 48 to 57VDC
Working temperature: -30 - + 85 ° C
target: 125 x 102 x 32 mm (H, D, B)
AC / DC power supply for your rail mounting
AC Input: 85 - 264Vac
Effect: 60W
Output voltage: 24V / 2.5A
Screw terminal
Adjustable output voltage for 24 to 29V
Working temperature: -30 - + 70 ° C
Dimensions: 90 x 54.5 x 62.5 mm (H, D, B)
Net adapter with mini UPS 12W, 2,1A
Connection to 5.5 x 2.1mm
Entrance 95-265 VAC
Exit 12VDC 1A 12W
3.7V Lithium-Ion 18650 type Battery (2600mAh)
short circuit protection
Backup time: 6W is less than 30min
Backup time: 12W is less than 10 min
dimensions 87 x 59.8 x 29 mm
Input voltage 95-265VAC
Manual Select voltage: 5V / 7.5V / 9V / 12V
Adapters for 3.5 x 1.35mm, 4.8 x 1.7mm, 5.5 x 2.5mm
Main DC connector 5.5 x 2.1mm
Digital with Microprocessor Control
Battery Level, Battery Life Led Indicator
Over Discharge, Overload, Short Circuit Protection,
Over Charge, Surge Protection
Output 24VDC at 42A (1000W)
Input 90VAC - 305VAC
Input-output by terminal block
Remote ON/OFF and DC OK signal
Dimensions 140x41x290mm
SFX PSU to ATX(PS2) mounting holes
Designed for use in most ATX or Micro-ATX cases
150mm (L) x10mm (H) x 86mm (W)
5.91" (L) x 0.39" (H) x 3.39" (W)
0.8mm
12 volt linear power 3.6Watt
minus on center hole
3.5mm / 1.2mm Power Jack connector
Net adapter type
1.8 meter cable
AC / DC power supply for DIN installation.
Input 115-230Vac
Output 12VDC 6A (72W)
Adjustable from 10 to 15.5VDC
Screw terminals
Goal: 50 x 120 X 50mm
Operating temperature: -25°C - +70°C
AC / DC power supply for DIN mounting.
Input 115-230VAC
output 24VDC 5A (120W)
Adjustable from 22 to 27vdc
Screw terminals
Dimensions: 55 x 110 x 105mm
Operating temperature: -25 ° C - + 70 ° C
AC / DC power supply for DIN installation.
Input 115-230Vac
output 48VDC 3,75A (180W)
Adjustable from 41 to 55VDC
Red LED indikate DC out is OK
Screw terminals
Dimensions: 55 x 110 X 105mm
Operating temperature: -25 ° C - + 70 ° C
Switch Mode Power Supply
16.8VDC 2A
1 meter Cable
Power Jack: 5.5 / 2.1mm
Power supply for e.g. notebook
C6 plug, DC plug 5.5/2.5mm
1.5 meter cable with ferrite
Output current: 4.74A
Output voltage: 19 V
Max: power: 90 W
Operating temperature: -20 to +80°C
Dimensions: 129 x 51 x 31 mm
Purchase additional mains cable with Mickey Mouse plug
Universal electric car charging stand for all EV vehicles
Allow two electric cars to charge at the same time
Smart design
Dynamic management of charging
Interface protocol: OCPP 1.6
Payment for parking and charging by payment card
Monthly fees apply
AC Input 230-400 VAC +/- 10 (2 or 3 phase)
Total Power output 2 x 22kW / 2 x 32A Max (load sharing)
Payment: Payment card, Google Pay, Apple Pay (option: MobilePay)
Communication: 4G
IP degree: IP55
Operating temperature: -25 C° to 55 C°
Dimensions: 520 x 360 x 260 mm
Charger cable not included. The user uses the cable that comes with their car.
Input from 36 - 75VDC
Output 12VDC Max. 10A (120watt)
92% Efficiency
synchronous rectifier technology
IP65
Dim: 110 x 70 x 23 mm
CE Rohs
20 cm
4 pole male DC plug
Jack connector 5.5x2.1mm female
5.5x2.5mm compatible
CHECK PINOUT BEFORE CONNECTION!
Outputs 16 x USB 3.0 USB-A
Inputs 1 x USB-B 3.0-B
DC input 12VDC/ 7.5 amp (90 watts)
Turn on/ off button on each USB port
Up to 450MB/S 5GB/S Theoretical
Aluminum
Power Supply 12V/7.5a included
Dimensions: 123 x 54 x 25 mm
Output 24VDC / 5A (120W) via terminal block
Input 100VAC - 240VAC / 50 / 60Hz / 1.4A via IEC C14 connector
Switch mode power supply
Dimensions 165 x 67 x 35.5mm (L x W x H)
18500 Lithium-Ion battery
Rated voltage: 3.7V
Capacity: 2040mAh
Max. load: 3.8A
Operating temperature: +10 ~ + 45 ° C
Charging method: CC-CV
Dimensions: 18.5 x 49.5 mm
Weight: 36.5g
Without protection circuit