RFID reads Mifare 13.56MHz for TCP / UDP network, 5VDC
Network RFID reader
10 / 100Mbit Ethernet interface
Supports MDI / MDIX
1 x RJ45 and 1 x DC connector
TCP Server, UDP, DHCP
for 13.56MHz Mifare card
Supply: 5V DC PSU Max 300mA
Mifare 13.56 MHz RFID technology and main variants
The Mifare standard for RFID was originally defined by Philips in 1994 for use in non-contact electronic ticketing and was later described in the ISO / IEC 14443A standard for 13 , 56 MHz non-contact smart cards. Therefore, there is no emphasis on large reading distance, which is typically up to 8 cm using common tags and readers. Mifare is used eg. in the travel card in Denmark....
Mifare 13.56 MHz RFID technology and main variants
The Mifare standard for RFID was originally defined by Philips in 1994 for use in non-contact electronic ticketing and was later described in the ISO / IEC 14443A standard for 13 , 56 MHz non-contact smart cards. Therefore, there is no emphasis on large reading distance, which is typically up to 8 cm using common tags and readers. Mifare is used eg. in the travel card in Denmark. Mifare tags, like tags for the EM standard for 125 KHz, have a unique ID (UID) - but also have built-in memory that is stored in "sectors" in the tag.
Mifare technology available in several variants. Mifare Classic is provided with 1k or 4k memory organized in sectors. Mifare UltraLight has 512 bytes of memory in sectors - but otherwise works as Mifare Classic. MIfare PRO Works as a "smart card" with CPU and the ability to insert an operating system into the tag, so it's probably the most flexible of the Mifare technologies. In addition, there is a dedicated processor built-in for DES encryption to allow data to be secured against unwanted access.
Mifare DESFire supports AES encryption as well as DES and 3DES encryption when accessing sector data in the tag. Therefore, data with very high security can be protected against unwanted reading and copying. Works as a "smart card" with cpu and operating system built into a PROM area in the tag optimized for fast reading of data. Can use UID of up to 64 bits.
Subcategories
There are 31 products.
Network RFID reader
10 / 100Mbit Ethernet interface
Supports MDI / MDIX
1 x RJ45 and 1 x DC connector
TCP Server, UDP, DHCP
for 13.56MHz Mifare card
Supply: 5V DC PSU Max 300mA
Frequency: 860-960MHz
PVC / PET
ISO18000-6C (EPC GEN2)
Dimensions: 86x54x0.8mm
Operating temperature: -25C - 85 degrees
20 pcs. Mifare Transponder / TAG to Keychain
Mifare Classic 1K RFID TAG
Reading distance: 0 - 5 cm
ISO14443A
1 kilobyte Memory
768 byte free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed
Gray key ring
Frequency: 13.56MHz
Material: ABS, IP68
Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Dim: 85.7 x 54 x 0.8 mm
Mifare Classic1K TAG
designed as key ring
Bag with 20 pieces.
reading distance: 0 - 5 cm
ISO14443A
1 kilobyte Memory
768 byte free in 16 sectors / 4 Blocks / 16 byte
UID code is factory programmed - cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
Dim: 40 x 32 x 4 mm
Mifare Classic 1K RFID Tag
Reading distance: 0 - 5 cm
ISO14443A
1 Kilobyte Memory
768 byte Free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Cannot be changed
blue key ring
Frequency: 13.56MHz
Material: ABS, IP68
DIM: 40 x 32 x 4 mm
Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte Free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Can't change
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Numbered - printet on the card
target: 85.7 x 54 x 0.8 mm
Top-class scanner for item and product registration
Professional Multi Reader and Writer for RFID and Barcode 1D/2D/QR etc.
Powerful circular polarized antenna
UHF RFID read and write up to 25 meters, depending on TAG
UHF TAGs are passive - without a battery
Reads NFC and Mifare TAGs
Reads up to 900 TAGs per second
Barcode reader CCD: 1D, 2D, QR codes
Access to the APP Center with programs and tools
13MP camera with flash
5.2" Display - 1920 x 1080p with touch
Communication: dual band Wifi, Bluetooth, 4G LTE
Dual SIM or Single SIM and Micro CD card
GPS/AGPS, GLONASS
Battery: 8000mAh Li-ion (approx. 12 hours of operating time)
IP65 tight. 1.5 meter drop tested
Operating temperature: -20 - +50°C
USB HF RFID reader with fingerprint
Available with and without funger pressure scanner
Desktop
USB 2.0 Compatible
Incl. programming software download Up to 2,000 fingerprint
range 0-5 cm Kirke roof type: ISO15693 / ISO14443A (Mifare) / ISO14443B / DESFire / NTAG203
supply: USB 5V / 200mA
Operating temp. -20 to + 70 ° C
Play
Plug Dimensions: 105 x 72 x 16 mm
Interface: USB
Reading distance: 0-6 cm
TAG Type: EM4100 and FDX-B
Built-in Antenna
Built-in Buzzer
Supply: USB 5V / 200mA
Drift temp. -20 to +70 ° C
Plug Play
Dimensions: 105 x 72 x 16 mm
Frequency: 13.56 MHz
Can easily be programmed for other formats
programmable HID or COM port
Can program sectors in TAG
RF Protocol: ISO14443A, MIFARE
Built-in antenna
supply: USB 5V / 200mA
Operating temp. -20 to + 70 ° C
Play
Plug Dimensions: 105 x 72 x 16 mm |