Atomic clock, GPS controlled time server NTP Server Network. Dual LAN with TCXO

Atomur- controlled GPS time server to the network 32
channel receiver which reduces the risk of signal loss
TCXO (Temperature Compensated X-tal Oscillator) in order to keep the time in the absence of GPS signal
10 / 100BaseT redundantly Ethernet
Low power consumption only 7W
230VAC 50-60Hz 0.1A
Operating temperature 0 to 50 °
Supplied with multi-antenna, wall mount and 30 m RG58 aerial cable

ATOMUR-SAT-TRD+
20,244.00 DKK
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

GPS-controlled time server for network
time server delivers very high accuracy. The built-in GPS receiver detects 32 different satellites and provides accuracy of better than 3 microseconds, Italy although taking account of normal delays in the network, or 15 nanoseconds. It is therefore well suited as a real source of various industrial systems with high precision requirements.

Compatible with most operating
Can be used for all products that support protocols Network Time Protocol (NTP), and Simple Network Time Protocol ( SNTP), Italy that includes Windows, Linux, Unix, Novell and most switches and routers from such. Cisco.

Robust aluminum construction with no moving parts for long life

Andet
Timing: GNSS Accuracy: 15 nsec (15x10-9 sec, GPS Lock) NTP Accuracy (GPS Lock): usec (3x10-6 sec) TCXO Holdover 24 Hours (after 24 hrs continuous GPS lock): ±4.3 msec (25°C) ±164 msec (0°C-40°C)
Antenne
T-3740 GNSS Multi-Constellation Antenna
Dimensioner
483 x 145 x 44 mm (19.0” x 5.71” x 1.73”)
Driftstemperatur
0-50°C
Forsyning
230VAC 50-60Hz 0.1A
GPS
GPS/GNSS Timing Receiver 32 Channel Multi-GNSS receiver. GPS, GLONASS, Beidou, Galileo*1. Time-Receiver
Interface
Dual 10/100 Mbit Base-T, RJ45, Auto-Sensing Network Interfaces. TNC RF Connector For Active GPS/GNSS Antenna. USB port for firmware updates. RS232 Console Port for Configuration and Status. Second RS232 (shared) Port for serial time code output.
Kabel
30m RG58 Cable.
Kabinet
1U High 19" Rack-mount, Aluminium
LED
40 character x 2 line LCD display. Red/Green Alarm LED.
Protokol
Internet Protocol (IP) IPv4, IPv6. Timing Protocols: NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905). SNTP v3 (RFC 1769), SNTP v4 (RFC 2030). NTP Peering, NTP Broadcast. NTP MD5 Authentication.
Software
Flash-Based Linux Operating System with PPS Extensions.
Weight
1.2Kg

4 other products in the same category:

NTP Server - Atomic clock...

NTP Server - Atomic clock receives the time from DCF77 in Frankfurt. Extremely accurate time synchronization of Servers / PCs.

NTP Server - Atomic clock for 19 rack mounting.
Signal from DCF77 in Frankfurt (77.5kHz).
Rod antenna with 5 meter cable with BNC male
Additional antenna cable 50 ohm, BNC male/male
Purchase BNC-SAMLE
With network port and serial port
1U for rack mounting
Power is supplied from 230VAC.

Price 12,579.00 DKK
Product code: ATOMUR-PRO19"
On the way in  
Quick view
PDU med HotSwap og...

PDU med HotSwap og reststrømsmåling, 4 x IEC C19 udgange 16A, 4 x IEC C20 strømforsyning 16A, 3 x RJ45,

4 ports PDU med samlet strømmåler via netværk
Med reststrømsmåling type A.
19" rackmontering, 1U
Måling af energi og elektriske dimensioner
Integreret Hotswap skuffe til udskiftning af processor/strømforsyning under drift
Måling af 2 resp. 4 separate faser
4 x IEC C13 udgange 14A 
3 x RJ45, LAN og Sensor
4 x IEC C20 Strømforsyning 16A
SNMP Get/traps 

Price 8,338.00 DKK
Product code: PDU-HSW2+4M
On the way in  
Quick view
Advanced remote monitoring...

Advanced remote monitoring and control over networks. 1 x sensor input, 4 x relay outputs, 8 x contact inputs. Watchdog

4 x potential-free shutter release, & 230VAC / 16 A, & 24VDC / 10 A
8 x passive signal inputs - contact inputs
1 x RJ45 Ethernet
4 x Watchdog to monitor connected devices (ICMP / TCP)
1 Mini-DIN connector for optional sensor or serial interface (RS232)
Programmable on / off sequence
SNMP Get / Traps (SNMPv1, SNMPv2c), Syslog, e -mail
APP for Android and iPhone
2-color LEDs for status info on front
DIN rail mounting

Price 3,606.00 DKK
Product code: ETH-TEMP-2302
Physically in stock  
Quick view
Switch on and off equipment...

Switch on and off equipment via network, 4 x CEE 7/3 Schuko outputs, up to 16A, RJ45,

4 ports PDU with individual power on / off and total current meter via network
1 x Alternative Type E connector (CEE 7/3) max 16A
User interface via web browser with Password
Programmable sequential power up 4 x Schuko outputs type F, max. 16A
4 x Watchdog with ping of & nbsp; each connected PC
SNMP Get / Traps and Email Support
Supporting Iphone and Android

Price 3,220.00 DKK
Product code: NPOWER4-1202
On the way in  
Quick view