Wifi Access Point, Bridge, Client. DIN mount
2,4GHz or 5GHz, 300Mbit
MIMO antenna, 2 x RSMA female
9 - 48VDC, 6Watt
Temperature: -10 - +60°C 
Size: 47 x 110 x 90mm

MMCX type male for N type male connector
30cm RG58, 50 ohm

1D, 2D barcode reader
Wireless 2.4GHz via base station (supplied) or USB-A to USB-B cable (included)
Reading distance: 10mm-700mm
Operating time: Approx. 12 hours
Recharge time: Approx. 6.5 hours via USB or base station
Memory: 512K (over 5000 scans)
Dimensions: Scanner: 175 (L) x 72 (B) x 100 (H), Base: 200 (L) x 90 (B) x 51 (H) mm
Weight: 210g (Scanner), 230g (Base)

1D, 2D barcode reader
Wireless 2.4GHz (RF dongle) or USB-A for USB-B cable
Reading distance: 10-500mm
Operating time: Approx. 16 hours
Recharge time: Approx. 6.5 hours via USB-B
Memory: 512K (over 5000 barcodes)
Dimensions: 150mm (L) x 70mm (W) x 95mm (H)

Infrared data transfer via USB
Range up to 1 meter
Transfer data through glass pane

Wireless / RF Mini Keyboard
Built-in Mini Touchpad as 90 ° Reverable
71 Keys and Laser Points
Connection: Bluetooth electricity. RF Dongle
Built up charging battery.
Load via USB port
Backlight
Size: 151 x 59 x 12.5 mm

Wireless RS232 link between two RS232 ports.
Only available as a set (2 pcs.).
BT Ver 2.0 + EDR Class1
Up to 100meters with accompanying antennas by line-of-sight
Up to 1km with greater external antennas (optional)
automatic connection establishment at power on
with frequency hopping to avoid interference
Baud rate: 1200 - 115.200kbps, 8 data bits, the O / E / No, 1/2 stop bits
Setup baud rate, etc. with Hyper Terminal or the like.
RTS / CTS on / off - DTR / DSR / DCD loop-back
Supports multi-connection: 1 master 4 slaves
Supply voltage: 5 - 12VDC / 80mA

Bluetooth from PC to the adapter provides RS232 port
External antenna.
Bluetooth 2.0.
With 2 pcs. as back-to-back link
provides connection between 2 COM ports
Wireless transfer of data between serial ports
Up to 100 meters
Antenna connector is RSMA female
Setup via AT commands
Must be powered from 5 - 40VDC via screw terminal
USB mini cable to A male - for power from 5VDC
2 x screw terminal for any external power supply
Is not battery-powered
Use Putty for testing/setup
Help with setup can be purchased additionally

Keyboard with joystick - X, Y, Z axis
The macros are stored in the keyboard.
The functions move along
12 programmable keys
Software for setting up macros
Program for MS, Linux, Android, Raw HID
The macros are in the keyboard
Blue LED backlight
IP40
USB (1.4m cable)

Splitter connector for USB KEY3
3 connectors to USB KEY3, instead of only 1.

24 prog. keys
handheld, desktop, or mounted use
Addressable blue and red backlighting for each key
USB connection (other options available)

USB Programmable Keypad for KVM Control, 60 keys.
USB - HID
Customize for managing KVM Switch
PROGRAM for Button macro: Macroworks 3.1
easy and simple programming
Works With all operating systems
built-in memory with 1000 seats
blue and red addressable backlight
target: 210 x 184 x 41 mm