7 ports PDU with overall power meter through network
One power meter can be reset, the other accumulates consumption.
User interface via web browser with Password
7 x IEC C7 outputs, max. 16A (safety socket)
1 x RJ45 to LAN and 1 x RJ45 for remote sensor (temperature, humidity, hPascal
SNMP Get / traps and email support
S-IND19 "239V7 enables you to measure on electrical devices through TCP / IP or serial interface. 7 & nbsp; x Schuko & nbsp; outputs (max. 16 & nbsp; A). These power ports can be monitored individually via the Web interface, serial interface, SNMP or a push button directly on the device. Sensor inputs & nbsp; allow for monitoring of ambient temperature and humidity. Temperature and temperature / humidity sensors.
temperatur og fugt føler, kan måle i vådt miljø
Sensor registreres automatisk (plug-and-play)
Længde: 2,3 m med RJ45 interface
-20 ° C til +80 ° C
Box temperature and humidity sensor for wall mounting
Sensor detected automatically
Can be connected with RJ45 STP cable up to 40 meters from the control
Temperature and humidity range: -20 ° C to + 80 ° C, + / -0.5 ° C, 0 to 90% rH, +/- 3%
8 port PDU with individual on / off and overall energy measurement via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up
8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
8 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android
4 ports PDU with individual power on / off and total current meter via network
1 x Alternative Type E connector (CEE 7/3) max 16A
User interface via web browser with Password
Programmable sequential power up 4 x Schuko outputs type F, max. 16A
4 x Watchdog with ping of & nbsp; each connected PC
SNMP Get / Traps and Email Support
Supporting Iphone and Android
Atomur- controlled GPS time server to the network 32
channel receiver which reduces the risk of signal loss
TCXO (Temperature Compensated X-tal Oscillator) in order to keep the time in the absence of GPS signal
10 / 100BaseT redundantly Ethernet
Low power consumption only 7W
230VAC 50-60Hz 0.1A
Operating temperature 0 to 50 °
Supplied with multi-antenna, wall mount and 30 m RG58 aerial cable
4 x potential-free shutter release, & 230VAC / 16 A, & 24VDC / 10 A
8 x passive signal inputs - contact inputs
1 x RJ45 Ethernet
4 x Watchdog to monitor connected devices (ICMP / TCP)
1 Mini-DIN connector for optional sensor or serial interface (RS232)
Programmable on / off sequence
SNMP Get / Traps (SNMPv1, SNMPv2c), Syslog, e -mail
APP for Android and iPhone
2-color LEDs for status info on front
DIN rail mounting
