KAM-IP2MP-POE+ is a discreet 1920x1080 pixel Full HD network camera. The aspect ratio is 16:9 and is therefore perfect for widescreen monitors.
The model has a built-in PIR (passive infrared) motion sensor that can activate recording, pull the built-in relay and send an e-mail, possibly with attached image. If the relay output is connected to an alarm system, the camera also functions as a room sensor.
KAM-IP2MP-POE+ can be supplied via PoE or supplied power supply, Video is compressed according to the H.264 / MPEG4 / M-JPEG standards in several different resolutions.
Up to 20 simultaneous users can follow the surveillance on the local network or over the Internet via the camera's web interface. Windows software is included that can record from and manage up to 64 cameras. The recordings can also be saved locally on a micro SD card.
Image sensor: Full HD widescreen 1/2.9" Sony Exmor Progressive CMOS sensor
Lens: 4.2 / F1.2 mm fixed focal length and aperture, adjustable focus
Viewing angle: Horizontal: 56°. Vertical: 43°
PIR sensor: Built-in. Range 6 m / 120°
Zoom: Digital zoom
Video resolution:
In 1080P:
H.264: 1080P / 640 x 360 / 672 x 352 / 320 x 180 / 160 x 90
M-JPEG: 1080P / 640 x 360 / 320 x 180 / 160 x 90
MPEG4: 1080P / 640 x 360 / 320 x 180 / 160 x 90
In 720P:
H.264: 1280 x 720 / 640 x 368 / 640 x 360 / 160 x 90
M-JPEG: 1280 x 720 / 640 x 360 / 160 x 90
MPEG-4: 1280 x 720 / 640 x 360 / 160 x 90
Compression:
H.264 / MPEG4 / M-JPEG
Ethernet: 10/100 Mbit Ethernet.
Network protocols: IPv4, IPv6, TCP/IP, UDP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, DDNS, DHCP, ARP, Bonjour, UPnP, RTSP, RTP, RTCP, IGMP, PPPoE, 3GPP, ICMP, Samba
Night surveillance: Infrared light sensitive. 10 IR LEDs ensure invisible illumination of up to 5-10 mi darkness.
Alarm trigger: Motion in image, built-in PIR sensor, external digital input, audio
Alarm event: Upload of image to FTP, E-mail, NAS or micro SD card if this is inserted. A sound can also be played when an alarm is triggered
Pictures per second: Up to 30 fps in all resolutions
Motion detection: Up to 10 areas can be specified. Recording if there is a change in these
I/O connection: 1 x RJ-45 connector for Ethernet (PoE) 1 x MiniJack connector for external speaker
1 x TV output with analogue video 1 x DC connector for power supply
1 x micro SD card slot for local storage of images and video
1 x RESET button for resetting the camera
1 x terminal block connector with 1x alarm input and 1x alarm output
Sound: Built-in microphone and speaker. G.726 / AMR encoding.
Audio output for external speaker
Web server: Supported by IE 6.0 and higher as well as the supplier's own software that is included
Dimensions: 91 x 58 x 39 mm. (H x W x D)
Operating temperature: -10 ~ 40° C at a non-condensing humidity of 20 ~ 80%
Weight: 146 g.
